Only show results in Connecticut? Ok

gas standard software

  • Continuously Monitors & Controls Mass Flow Controllers Software

    The custom designed software continuously monitors and controls mass flow controllers (MFC’s) and allows an automatic generation of gas mixtures in a programmed sequence. Dry contact closures or digital contacts ensure the software can be either remotely controlled, or send a signal in order to drive an external valve or start a third party ...

    By ALYTECH based in Juvisy sur Orge, FRANCE.

  • GA - Version SafeEdit - High-performance Engineering Tool for GA Blueline Systems and Components

    This engineering tool provides a development and test environment for TÜV-certified SIL3 safety and control systems. Beside textual programming a graphic editor (based on IEC 61131-3 standard) facilitates easy handling. GA BlueEdit features an online diagnostic mode, temporal correlation analysis and a simulation mode.

    By GEBHARDT Automation GmbH based in Ennepetal, GERMANY.

  • P2 Tobin - Oil and Gas Mapping Software

    Tobin Data is the industry standard in oil and gas mapping software and has been for 90 years. With over 100 dedicated specialists, Tobin gives you the confidence to build the best, most trusted maps possible. With a history of pinpoint accuracy, and fast, quality data delivery, Tobin’s user-friendly design lets you see well, lease, and ...

    By P2 Energy Solutions based in Denver, CALIFORNIA (USA). from Oil & Gas Data Software line

  • Interval Meter Monitoring Software

    Consolidate interval meter data from utility meter providers and sub-metering systems, to simplify and standardize monitoring of electricity, gas and water use at a granular level.

    By Envizi based in Eveleigh, AUSTRALIA. from Energy Management Software line

  • Q EHS Air Modules

    Q EHS Air modules are designed to address the needs of the minor and major stationary sources, industry specific MACT standards, Greenhouse Gas, and Title V record keeping and reporting requirements. Each module contains a tool set to estimate air emissions and prepare necessary compliance reports and filings. You can also use emission estimates ...

    By Quantum Compliance based in Ann Arbor, MICHIGAN (USA). from Environmental Reporting Software line

  • SANGEA - Emissions Reporting Tool for Oil & Gas Industry

    Since the early 2000’s, the American Petroleum Institute (API) has sponsored the SANGEA software tool for the oil and natural gas industry to quantify greenhouse gas (GHG) emissions and standardize emissions reporting. The information from SANGEA is used for API GHG benchmarking studies, industry climate change reporting, as well as for ...

    By T3 EH&S Planning and Implementation Services based in Dallas, TEXAS (USA).

  • Chromperfect - Natural Gas Analysis Software

    Chromperfect Natural Gas Software is designed to run on Chromperfect Chromatography Data System software. Produce complete reports of heating value (BTU/CF), compressibility, and other natural gas properties as defined by  the Gas Processor's Association Standard 2261-90. Works with dual- column, single-column, and back-flush methods. The ...

    By Justice Laboratory Software based in Denville, NEW JERSEY (USA). from Data Acquisition and Instrument Control Software line

  • AGC - Version TrendVision PLUS - Chromatography Software

    TrendVision PLUS is the most recent release of the well recognised Chromatography Data Capture Software from AGC Instruments. Specifically designed for this market, it has been developed following careful consultation with our customers so that it is easy to use and set up.

    By AGC Instruments Ltd. based in Shannon, IRELAND.

  • Nomination Management

    The increasing process speed in contract handling, the large number of products and contracts as well as the extensive communication required with every business partner are special features of the European energy market. To operate efficiently and therefore remain competitive is both a challenge and an essential requirement for all market ...

    By EXXETA AG based in Karlsruhe, GERMANY. from Transport Software line

  • OpX - Version SX - Integrated ISO | API QMS Solution

    OpX is an integrated ISO | API compliance management system that provides the oil & gas industry with a dedicated solution for maintaining multiple compliance standards simultaneously. With a simple user interface, flexible tools, and on-demand access, OpX represents the best of a modern approach to decision-making and delivers for teams that ...

    By Accupoint Software based in Youngstown, OHIO (USA).

  • Version 10.0 - GWB Essentials

    The Geochemist's Workbench 10.0 Essentials edition makes quick work of some of the tasks most commonly encountered in geochemistry. With a few mouse clicks, you can balance reactions, figure equilibrium constants, and produce Eh-pH (Pourbaix) and activity diagrams. The package features a spreadsheet designed to hold and manipulate your geochemical ...

    By Geochemist`s Workbench based in Champaign, ILLINOIS (USA). from GWB Software Software line

  • WellCAD - Well Log Visualization Software

    WellCAD is a Windows-based package for creating composite well logs. Prices for Single licenses including maintenance are listed below. For other license types, use the following multipliers: Network USB: 1.25x, Regional Floating: 1.5x, Global Floating: 2.0x. Annual Maintenance (18%) is optional for Single and Network USB licenses, and required ...

    By RockWare, Inc. based in Golden, COLORADO (USA).

  • Protea - Spectral Libraries Software

    We have built a large set of traceable reference spectra for use with Protea FTIR products. This spectrum library contains hundreds of organic and inorganic gas species. All references can be traced back to National Standards and are transferable references across our FTIR gas analysers.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • DataApex - NGA - Natural Gas Analysis Extension

    NGA Extension is a software module for Natural Gas and Liquefied Petroleum Gas Data Processing. You no longer neeed an external tool for gas properties calculations since the Clarity contains the complete workflow of data acquisition, peak calibration, gas properties calculations based on supported norms and reporting. It is possible to perform ...

    By DataApex based in Prague, CZECH REPUBLIC. from Clarity Extensions Software line

  • Version 10.0 - GWB Standard

    The Geochemist's Workbench 10.0 Standard edition is your choice for spreadsheets, diagrams, and multicomponent reaction modeling. With GWB Standard, you can plot how species distributions change, model water-rock interaction, and simulate fluid mixing. GWB Standard integrates kinetic rate laws of any form and simulates microbial metabolism and ...

    By Geochemist`s Workbench based in Champaign, ILLINOIS (USA). from GWB Software Software line

  • Smallworld - Version GIS - Network and Plant Documentation NRM Gas Software

    NRM Gas is certified by, and developed to specifications outlined by the DVGW - German Technical and Scientific Association on Gas and Water. In addition to network and plant documentation NRM Gas enables the seamless integration of planned assets, as well as the documentation of assets that are out of service or abandoned. NRM Gas is a proven, ...

    By Mettenmeier GmbH based in Paderborn, GERMANY.

  • Energy Data Management Centers

    DR DAS has developed EnergyView, a tiered web application to meet the need to aggregate energy information from standard municipal, commercial, and industrial electric and gas meters, as well as monitor and dispatch standby generator capacity.  Providing current electric use and generation data, EnergyView assists an organization by ...

    By DR DAS based in Granville, OHIO (USA).

  • Protea - Version PAS Pro - Fixed Process Analyser Control Software

    When it comes to running continuous analysis system on process, a dedicated 24/7 running software environment is required. For this, Protea has developed PAS-Pro. PAS-Pro is built upon the same trusted components that make up the standard PAS application for the laboratory. However, the interface is stripped down to a more engineer-friendly ...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • MIDAC - Gas Phase Infrared Spectral Standands Software

    MIDAC Standards is a library of over 150 gas phase reference spectra. These spectra are needed because of the Clean Air Act amendments of 1990. These amendments have increased the number of hazardous air pollutants (HAP's) for which emission rates must be measured. Quantitative identification of toxic air compounds in an emissions source is more ...

    By MIDAC Corporation based in Westfield, MASSACHUSETTS (USA).

  • Version 10.0 - GWB Professional

    The Geochemist's Workbench 10.0 Professional edition is the complete suite of tools to meet every practicing geochemist’s needs. GWB Pro is your choice for reactive transport modeling. One-dimensional and two-dimensional simulations of reactive transport in single and dual-porosity media, including bioreaction and migrating colloids, are a ...

    By Geochemist`s Workbench based in Champaign, ILLINOIS (USA). from GWB Software Software line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you