geology Software Solutions | Environmental XPRT

EnterVol - Version Geology - Volumetric Geologic Software

EnterVol Geology creates volumetric geologic models using the same proven technology in C Tech’s EVS & MVS software used worldwide by customers such as the U.S. Environmental Protection Agency, Environment Canada, Chinese Research Academy of Environmental Sciences, U.S. Geological Survey, British Geological Survey, U.S. Army Corps of ...

By C Tech Development Corporation based in Las Vegas, NEVADA (USA). from Volumetric Geologic Software Software line

EnterVol Geology - Web-Based 3D Earth Volumetric Studio Software

C Tech’s Earth Volumetric Studio and EnterVol software can be used to publish 3D models to the web where they can be viewed on any device, browser, or operating system. Interact with these models on your smartphone or tablet.

By C Tech Development Corporation based in Las Vegas, NEVADA (USA). from Web-Based 3D Earth Volumetric Studio Software Software line

Geosoft - Subsurface Geology for ArcGIS

Target for ArcGIS is a geology mapping extension for Esri ArcGIS that simplifies 3D visualisation and analysis of drillhole and borehole geology data within ArcMap. Using Target for ArcGIS, you can visualise your geology data in 3D and conduct integrated analysis to enhance subsurface insight.

By Geosoft Inc based in Toronto, ONTARIO (CANADA).

GeoModeller - Version 3D - Geology Modeling and GIS Software

GeoModeller is a software tool for 3D geological modelling. For building complex, steady state, 3D geology models – and performing forward & inverse geophysical modelling directly from solid 3D geology. Comprising a Geological Editor, Drill hole & grids/meshes management, Forward & inverse geophysics modules to manage and ...

By Advanced Groundwater Technologies (AGWT) based in SERBIA.

Geosoft - Version CLU_STAR - Program for Computerised Structural Geology Data Collection and Analysis

CLU-STAR is a program for computerised structural geology data collection and analysis. The program recognises the discontinuity sets of a rock mass through hierarchical and non-hierarchical clustering procedures derived from the multivariate analysis.

By Geosoft International based in Torino, ITALY. from Program for Computerised Structural Geology Data Collection and Analysis Software line

EarthSoft and C Tech Announce New EQuIS interfaces to EVS and EnterVol

EarthSoft has released new versions of its EQuIS interfaces with EVS and support for the new EnterVol software from C Tech Development Corp. As an ArcGIS extension, EnterVol is easily run from within EQuIS for ArcGIS for advanced data analysis and decision support. This industry-leading product integration provides an expert system so ...

By EarthSoft, Inc based in Concord, MASSACHUSETTS (USA).

EarthSoft EQulS™ Professional - Advanced Data Management for Decision Support and Data Analysis

EQuIS Professional is a powerful software application for checking, editing, loading, reporting, and visualizing environmental and sample data. EQuIS Professional provides the administrative capabilities of the EQuIS data management workflows. EQuIS Professional provides advanced tools for environmental scientists and engineers to review ...

By EarthSoft, Inc based in Concord, MASSACHUSETTS (USA).

SiteFX - Environmental Data Management System

SiteFX is an environmental data management system used by municipalities, environmental consultants and industry scientists to:Add/edit locations and their properties (e.g., coordinates, type, geology, borehole construction, etc.), Enter and import any temporal data (water levels, chemistry, climate, etc.),Summarize and analyze temporal data with ...

By Earthfx Incorporated based in Toronto, ONTARIO (CANADA).

Underground Modelling Software

The quarrying industry often depends on tools developed for the minerals mining. Instead, GEOREKA has been developed in collaboration with quarrying industry professionals, providing you with workflows dedicated for the quarrying industry. GEOREKA specializes in underground modelling of mineral resources and geology. It complements design packages ...

By Georeka Software based in Lancaster, UNITED KINGDOM.

DisAgg - Spatial Disaggregation Analyses Software

Spatial analyses in the fields of urban and regional planning, transport planning, environment, climate or geology often require high resolution socio-economic data. Such analyses work with raster data to calculate indicators such as exposure to air pollutants or to noise.In many cases available socio-economic data do not have the necessary ...

By GISCON Geoinformatik GmbH based in Dortmund, GERMANY. from Spatial Disaggregation Analyses Software Software line

Res2Dinv - 2D Resistivity & IP Inversion Software

Two-dimensional (2D) electrical imaging surveys are now widely used to map areas of moderate- ly complex geology where conventional ID resistivity sounding surveys are inadequate. The RES2DINV program uses the smoothness-constrained least-squares method inversion technique (Sasaki 1992) to produce a 2D model of the subsurface from the apparent ...

By Geomatrix Earth Science Ltd based in Leighton Buzzard, UNITED KINGDOM. from 2D Resistivity & IP Inversion Software Software line

SeisWare - Volume Attributes

SeisWare has added *Rock Solid Attributes™ to complement many existing volume and horizon attributes.

By SeisWare International Inc based in Calgary, ALBERTA (CANADA). from Volume Attributes Software line

SeisWare - Cross Section/Modeling

Using cross section and modeling, compare synthetic sections to actual seismic data to validate the seismic response to the geologic model.

By SeisWare International Inc based in Calgary, ALBERTA (CANADA). from Cross Section/Modeling Software line

AGI EarthImager - Version 1D - Inversion Modeling Software for Vertical Electrical Sounding

EarthImager 1D is an inversion modeling software program used to interpret one-dimensional electrical resistivity data and reveal a layered model of subsurface geology. EarthImager 1D can process vertical electrical sounding (VES) data collected with Schlumberger, Wenner, dipole-dipole, pole-pole, and various other arrays. Traditionally measured ...

By Advanced Geosciences, Inc. based in Austin, TEXAS (USA).

Geosoft - Geochemical Analysis for Esri ArcGIS

Geochemistry for ArcGIS enables explorers to analyse geochemical data within their Esri ArcGIS environment. Using Geochemistry for ArcGIS, geoscientists can effectively examine multivariate relationships, uncover underlying structures and present results with visually impactful maps.

By Geosoft Inc based in Toronto, ONTARIO (CANADA).

Geosoft - Interactive Modelling of Gravity and Magnetics

GM-SYS Profile Modelling is an intuitive and feature-rich workflow for gravity modelling which provides many opportunities to constrain modelling variables. It enables you to test geologic model accuracy by comparing the model's gravity and magnetic response to observed measurements.

By Geosoft Inc based in Toronto, ONTARIO (CANADA).

GeoSyn - Geological Modeling Software

Enhance geophysical interpretation with 1D and 2D geological modeling. GeoSyn® is scientific synthetic modeling software that provides “what-if” scenarios for a comprehensive relationship analysis between geological and geophysical data. GeoSyn also allows you to integrate proprietary, IHS and third party data.

By IHS Markit based in Englewood, COLORADO (USA). from Geological Modeling Software Software line

EasyLog - Borehole Log Software

A tool for creating graphical reports of borings, test pits, and groundwater monitoring wells. Improve the look of your professional reports with this easy to use Borehole Log Software.

By EasySolve Software LLC based in Tehachapi, CALIFORNIA (USA).

MapMakers - MM Contours ActiveX Control

The MM Contours ActiveX control is designed to visualize the data given in the random set of points on a plane. Each point is defined by its coordinates x and y and the value v – this is often called as XYZ data. The data are not obliged to be given at nodes of a regular grid, as it frequently is required in similar tools. The MM Contours ...

By MapMakers Group Ltd. based in Moscow, RUSSIA. from MM Contours ActiveX Control Software line

Techbase - Geotechnical Engineering Package

The TECHBASE Geotechnical Package was designed to perform all the essential tasks of the geotechnical professional. A sampling of these tasks is listed below. With TECHBASE, you can add more capabilities as your project advances, there is no need to buy another software package.

By Techbase International based in Reno,, COLORADO (USA).

Subscribe to our eBulletins

Add Supplier Profile