We couldn't find any geotechnical software suppliers or service providers located in Texas

Here is a list of software results with suppliers serving Texas

geotechnical software available in Texas

  • TerraBase ArcView - GIS Extensions Software

    TerraBase features a seamless interface with ArcView GIS. Data that would normally be a simple spreadsheet or report is automatically displayed on a map to show features such as 2D and 3D contours, subsurface detail and a whole lot more.

    By TerraBase Inc. based in Cresco, PENNSYLVANIA (USA).

  • Premium

    GPR-SLICE - Ground Penetrating Radar Imaging Software

    A comprehensive ground penetrating radar imaging software designed for creation of 2D/3D subsurface images for use in a variety of geotechnical, engineering and archaeological applications.

    By ImpulseRadar based in Malå, SWEDEN. from Ground Penetrating Radar Imaging Software Software line

  • Gabion - Version GEO5 - Geotechnical Software

    This program is used for gabion wall design. It allows analysis of any structure shapes including overhangs requiring anchoring.

    By Fine spol. s r.o. based in Praha 6, CZECH REPUBLIC. from Geotechnical Software Software line

  • Geopro - Geotechnical Software

    Our featured product.  This software package includes 50 programs, covering the major areas of the geotechnical field.  This includes slope stability, settlement analysis, flownets and seepage, foundation analysis.

    By Datasurge based in North Andover, MASSACHUSETTS (USA).

  • Settlement - Version GEO5 - Geotechnical Software

    This program is used to determine vertical settlement and time-dependent consolidation of soils under embankments, foundations, earth dams and surface loads (surcharges).

    By Fine spol. s r.o. based in Praha 6, CZECH REPUBLIC. from Geotechnical Software Software line

  • 3DEC - Version 5.2 - Geotechnical Software

    3DEC is a three-dimensional numerical modeling code for advanced geotechnical analysis of soil, rock, ground water, structural support, and masonry. 3DEC simulates the response of discontinuous media (such as jointed rock or masonry bricks) that is subject to either static or dynamic loading. The numerical formulation is based on the distinct ...

    By Itasca International, Inc based in Minneapolis, MINNESOTA (USA). from Geotechnical Software Software line

  • TGSW01 Geotechnical Software

    Main functions: Calculation of the point resistance, lateral friction and total resistance. Calculation of the RP/RL ratio (Begemann ratio 1965) and the RL/RP ratio (Schmertmann ratio 1978 - FR%). Printing of all the graphics in customized format. Database management. Export in ASCII file.

    By Pagani Geotechnical Equipment s.r.l. based in Calendasco, ITALY.

  • Techbase - Geotechnical Engineering Package

    The TECHBASE Geotechnical Package was designed to perform all the essential tasks of the geotechnical professional. A sampling of these tasks is listed below. With TECHBASE, you can add more capabilities as your project advances, there is no need to buy another software package.

    By Techbase International based in Reno,, COLORADO (USA).

  • Version RTgeo - Collection of Geotechnical Engineeing Tools

    RTgeo is a powerful collection of geotechnical applications and provides the following advantages:

    By RIB Software SE based in Stuttgart, GERMANY. from Collection of Geotechnical Engineeing Tools Software line

  • PLog Enterprise - Geotechnical Data Management Software

    pLog Enterprise allows you to harness your gINT project database to take it to the next level. pLog Enterprise is a single repository for all of your gINT geotechnical project data. By archiving all of your geotechnical and geoenvironmental projects into the pLog Enterprise , it becomes more than just data; it is information and a resource for ...

    By Dataforensics, LLC based in Atlanta, GEORGIA (US) (USA). from Geotechnical Data Management Software Software line

  • CPTU-ACQ Geotechnical Software

    Main functions: Visualisation in real time of the acquired and calculated data (qc, qT, fs, Rf, U, U0, U-U0, Speed, Tilt, Distance). Dissipation test acquisition. Printing (also in DXF and PDF format) of all the graphics in customized format. Database management. Export in ASCII and Excel file.

    By Pagani Geotechnical Equipment s.r.l. based in Calendasco, ITALY.

  • Version GEO5 - Slope Stability Geotechnical Software

    The program analyses the stability of generally layered soil slopes. It is used mainly for stability checks of embankments, earth cuts and anchored sheeting structures. The slip surface is considered as circular (the Bishop, Fellenius/Petterson, Janbu, Morgenstern-Price or the Spencer method) or polygonal (the Sarma, Janbu, Morgenstern-Price or ...

    By Fine spol. s r.o. based in Praha 6, CZECH REPUBLIC. from Slope Stability Geotechnical Software Software line

  • Version GEO5 - GEO5 Geotechnical Software Suite

    The GEO5 software suite is designed to solve various geotechnical problems. The easy-to-control package consists of individual programs with a unified user-friendly interface. Each program is used to analyze a different geotechnical task, however the modules communicate with each other to form an integrated suite.

    By Fine spol. s r.o. based in Praha 6, CZECH REPUBLIC. from GEO5 Geotechnical Software Suite Software line

  • GAEA - Version SE-Map - Geotechnical Extension Module Software

    This extension module of StrataExplorer is used to grid and contour data. The module can grid and contour many types of boring and well data, stratigraphic data from cross-sections, and other types of data. This version of the module has been specifically designed for the environmental industry After the data has been entered in the WinLoG and ...

    By GAEA Technologies Ltd. based in Napanee, ONTARIO (CANADA).

  • Keynetix - Version HoleBASE SI - Geotechnical Data Management Software

    HoleBASE SI is a state of the art geotechnical knowledge management system that will help you stay in control of your geotechnical project data and archive. HoleBASE SI’s unique features allow you to manage your data throughout the lifetime of a project and access historical information alongside your current project, transforming the way ...

    By Keynetix Ltd based in Redditch, UNITED KINGDOM.

  • HoleBASE 3.1 - Geotechnical Data Management Software

    HoleBASE is a comprehensive data management and borehole logging software package for geotechnical and geoenvironmental site investigations. The software is modular so you can start with a fully functional borehole logging program and then, later, if you need to draw cross sections, complete bill of quantities, invoices or AutoCAD drawings then ...

    By Keynetix Ltd based in Redditch, UNITED KINGDOM.

  • GAEA - Version WinLoG - Geotechnical 5 Extension Module Software

    The WinLoG version 5 extension module of StrataExplorer can be used to quickly and easily create, edit and print boring and well logs for a variety of industries. The module is a major upgrade to our very popular WinLoG version 4 program. WinLoG is used by more than 3000 firms in more than 80 countries worldwide. The geotechnical version of this ...

    By GAEA Technologies Ltd. based in Napanee, ONTARIO (CANADA).

  • RS2 - 2D Geotechnical Finite Element Analysis

    RS2 (Phase2 9.0) is a powerful 2D finite element program for soil and rock applications (RS2 = Rock and Soil 2-dimensional analysis program). RS2 can be used for a wide range of engineering projects and includes excavation design, slope stability, groundwater seepage, probabilistic analysis, consolidation, and dynamic ...

    By Rocscience based in Toronto, ONTARIO (CANADA). from 2D Geotechnical Finite Element Analysis Software line

  • PLAXIS - 2D Thermal and Geotechnical Modelling Software

    2D Thermal is an add-on module to PLAXIS 2D. The thermal module is necessary when the effects of heat flow on the hydraulic and the mechanical behaviour of soils and structures need to be taken into account in geotechnical designs with PLAXIS. For full thermal-hydro-mechanical coupling the PlaxFlow module is required as well.

    By Plaxis based in Delft, NETHERLANDS.

  • PLAXIS - 2 D Geotechnical Engineering Tool

    PLAXIS 2D is a powerful and user friendly finite element package intended for two-dimensional analysis of deformation and stability in geotechnical engineering and rock mechanics. PLAXIS is used worldwide by top engineering companies and institutions in the civil and geotechnical engineering industry. Applications range from ...

    By Plaxis based in Delft, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you