Only show results in Virginia? Ok

Micro-Combustion Analyzer software

  • Combustion Analysis Software

    Mirenco utilizes the latest in portable emissions monitoring equipment, computer software, and technical expertise to analyze the exhaust emissions coming from each piece of diesel powered equipment. This helps determine the current state of combustion for each power unit. In comparing emissions data from equivalent engines, it is possible to ...

    By Mirenco Inc. based in Radcliffe, IOWA (USA).

  • SAFER - Version CAM - Combustion Analysis Software

    Chemical fires - and the toxic smoke that accompanies them - create an assortment of dangerous situations, as well as significant post-event consequences.  Therefore, as important is it is to assess and handle the current danger, it is just as crucial to have a complete picture of the potential impact of the hazards associated with such ...

    By SAFER Systems LLC based in Westlake Village, CALIFORNIA (USA). from SAFER Product Series Software line

  • Showcase

    GRAL System - Mesoscale and Microscale Dispersion Modeling with GRAMM/GRAL

    The GRALsystem is a coupled Eulerian (GRAMM and GRAL wind fields) and Lagrangian model (GRAL dispersion). GRAL calculates optionally with its own prognostic or diagnostic wind field model. Depending on the influence of topography and land use, the GRAL calculation area can be approached by the wind with free flow, comparable with MISKAM, or ...

    By SoundPLAN International LLC based in Shelton, WASHINGTON (USA). from SoundPLAN Air Pollution Software line

  • CMC SmartCEMS - Version SCCT - Configuration Tools Software

    The SmartCEMS Configuration Tools is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The PEMS Analyzer will meet the requirements of Subpart E of Part 75 and/or and the standard under Part ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • Aero-Laser - Peak Integrator Software

    The Aero-Laser Peak Integrator was designed to determine the exact mass content of a trace gas from a concentration peak. The software post-processes data obtained, by an Aero-Laser trace gas analyzer. Sampling could be done e.g. by thermal desorption or by evaporating the gas content in an oven. For example, the Micro-Chamber µ-CTE is an ...

    By Aero-Laser GmbH based in Garmisch-Partenkirchen, GERMANY.

  • CMC SmartCEMS - Version PEMS - Predictive Emissions Monitoring System Software

    The SmartCEMS PEMS Analyzer is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The PEMS Analyzer will meet the requirements of Subpart E of Part 75 and/or and the standard under Part 60, ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • Version CFS - Configured Fireside Simulators

    CFS – Configured Fireside Simulators – are designed for use by engineers who are not experts in Computational Fluid Dynamics (CFD). CFS gives the real-world engineer the tools needed to optimize and analyze complex furnaces and boilers. CFS models are tailored to the customer’s furnace or boiler and accessed through an intuitive ...

    By Reaction Engineering International based in Salt Lake City, UTAH (USA).

  • ci-Tec - Version Inspect Pro Control C - Process-Control Optimization Software

    Process-control optimization with camera-based characteristic. inspect pro control C acquires and analyzes image data obtained from high performance infrared cameras in cement rotary-kiln systems. The so ware preprocesses image data and calculates characteristic parameters of the combustion behavior. On this basis, process control is adapted to ...

    By ci-Tec GmbH based in Karlsruhe, GERMANY.

  • Fuel and Material Flow Management for Power Plants

    MBS Power Generation module provides functionality to support fuel and material flow management for thermal combustion plants.

    By HAUK & SASKO Ingenieurgesellschaft mbH based in Bochum, GERMANY. from MBS Software line

  • ECOM - Version E-COMPLY SCAQMD - Changing Compliance Testing and Reporting Software

    ECOM America’s e-Comply software, the newest version of our industry changing compliance testing and reporting software. e-Comply is an easy to use Wireless system designed specifically for use with the ECOM J2KN Pro Series analyzers to make periodic monitoring a simple procedure. The software is a computerized version of the tests required ...

    By ECOM America Ltd. based in Gainesville, GEORGIA (US) (USA).

  • ECOM - Version e-Comply - Data Aquisition and Reporting Software

    ECOM America’s e-Comply software, the newest version of our industry changing compliance reporting software. e-Comply is an easy to use wireless system designed specifically for use with the ecom-J2KNpro Series analyzers to make periodic monitoring a simple procedure. The software is a computerized version of the most common EPA and state ...

    By ECOM America Ltd. based in Gainesville, GEORGIA (US) (USA).

  • CMC SmartCEMS - Version SCAEM - Alternative Emission Monitor

    The SmartCEMS Alternative Emission Monitor is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents. Sources monitoring using this product are typically not regulated under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75. The Alternative Emission Monitor product ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • CMC SmartCEMS - Version SCCAM - Compliance Assurance Monitor

    The SmartCEMS Compliance Assurance Monitor is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents. Sources monitoring using this product are typically not regulated under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75. The Compliance Assurance Monitor product ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • Fibermetric Application Software

    Direct observation and measurement of micro and nano fibers is faster, more efficient and easier than ever before, with the improved Fibermetric application. In combination with the Phenom desktop SEM, the Fibermetric application allows you to produce accurate size information from micro and nano fiber samples. Recent developments have enabled us ...

    By Phenom-World BV based in AM Eindhoven, NETHERLANDS.

  • CMC SmartCEMS - Version SCCPM - Continuous Parametric Monitor

    The SmartCEMS-Continuous Parametric Monitor is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas calculations for pollutants and diluents from various sources. The Continuous Parametric Monitor will meet the requirements of 40 CFR Part 60, Appendix B, PS-17. The Continuous Parametric Monitor is ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • ci-Tec - Version Inspect Pro Control H - IR-Based Optimization of Temperature Distribution Software

    IR-based optimization of temperature distribution and combustion behavior. inspect pro control H acquires the image data from infrared cameras which can cover all the way into the feed of the rotary kiln, depending on the spectral range. inspect pro control H inspect pro control H then uses these characteristic values to optimize incineration ...

    By ci-Tec GmbH based in Karlsruhe, GERMANY.

  • CeDAR CEMS - Data Acquisition and Reporting Software

    CeDAR is your best solution for data acquisition, display, storage and reporting of Continuous Emission Monitoring System (CEMS) data. Since CeDAR’s 1998 launch, it was developed as a highly configurable, user-friendly product, which will meet present and future data acquisition and reporting needs. CeDAR’s applications are broad in ...

    By Custom Instrumentation Services Corporation - CiSCO based in Englewood, COLORADO (USA).

  • Emission Master Software

    Our calculation platforms help the user to rapidly model chemical processes using the latest US EPA equations and techniques. Software features calculations for: (1) US EPA Chapter 16 equations and calculation methodologies for batch and continuous processes. Available process operations include filling, purging, heating, vacuum,  ...

    By Mitchell Scientific, Inc. based in Westfield, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you