rock mechanics Software Solutions

Geosoft - Version Clasrock - Classification of Rock Masses Software

The program classifies rock masses using both the Bieniawski and the Barton methods, making it thus possible to compare the results that can be obtained with the two most frequently used classification methods. The Bieniawski classification (RMR Index) evaluates different parameters to which a numerical ...

By Geosoft International based in Turin, ITALY. from Rock Mechanics Software line

Geosoft - Version ROTOMAP - Rockfall Protective Systems

, and to distinguish the different surface types, such as clean faces of hard unweathered rock or surfaces covered in talus, scree or gravel ...

By Geosoft International based in Turin, ITALY. from Rock Mechanics Software line

Geosoft - Version CLU_STAR - Program for Computerised Structural Geology Data Collection & Analysis Software

CLU-STAR is a program for computerised structural geology data collection and analysis. The program recognises the discontinuity sets of a rock mass through hierarchical and non-hierarchical clustering procedures derived from the multivariate analysis. These clustering procedures operate directly on the collected ...

By Geosoft International based in Turin, ITALY. from Rock Mechanics Software line

Geosoft - Version Accecalc - Rock Slope Stability Analysis Under Seismic Conditions Software

The program analyses the behaviour of the rock slopes under seismic conditions. It evaluates the displacements of a rock block subject to dynamic forces, on the basis of a given accelerogram. The use of a calculation method based on a given accelerogram for rock slope stability analysis allows one to take into ...

By Geosoft International based in Turin, ITALY. from Rock Mechanics Software line

Geosoft - Version ROCK3D - Three-Dimensional Rock Block Analysis Based Key Block Theory

ROCK3D is a program for stability analysis of removable blocks on planar rock slopes. It identifies and analyses all the blocks that have formed under each kinematic mode. Once the geometry of the rock blocks has been identified, the bolt forces necessary to reach a required safety factor are ...

By Geosoft International based in Turin, ITALY. from Rock Mechanics Software line

Plaxis - 3D Geotechnical Finite Element Software

Perform three-dimensional analysis of deformation and stability in geotechnical engineering and rock mechanics with PLAXIS 3D. Whether you are working on projects that are simple or complex, or you are working on excavations, embankments, and foundations or tunneling, mining, and reservoir geomechanics, this ...

By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA). from PLAXIS - Geotechnical Finite Element Analysis Software Software line

PLAXIS - 2 D Geotechnical Engineering Tool

PLAXIS 2D is a powerful and user friendly finite element package intended for two-dimensional analysis of deformation and stability in geotechnical engineering and rock mechanics. PLAXIS is used worldwide by top engineering companies and institutions in the civil and geotechnical engineering industry. ...

By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).

PLAXIS - 2D Suite

PLAXIS 2D Suite, including the Dynamics, PlaxFlow and Thermal module is a powerful and user-friendly finite element package intended for two-dimensional analysis of deformation and stability in geotechnical engineering and rock mechanics. PLAXIS is used worldwide by top engineering companies and ...

By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).

Plaxis - Version 2D Suite - Complete Geotechnical Software Package

Perform two-dimensional analysis of deformation and stability in geotechnical engineering and rock mechanics with PLAXIS 2D Suite. This powerful and user-friendly finite element package is used worldwide by top engineering companies and institutions in the civil and geotechnical engineering industry on projects of ...

By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA). from PLAXIS - Geotechnical Finite Element Analysis Software Software line

PLAXIS - 2D Geotechnical Finite Element Software

Perform two-dimensional analysis of deformation and stability in geotechnical engineering and rock mechanics. Engineering companies and institutions in the civil and geotechnical engineering industry count on PLAXIS for a variety of projects. From excavations, embankments, and foundations to tunneling, ...

By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA). from PLAXIS - Geotechnical Finite Element Analysis Software Software line

Plaxis - Version 3D Suite - Complete Geotechnical Finite Element Software

Perform three-dimensional analysis of deformation and stability in geotechnical engineering and rock mechanics with PLAXIS 3D Suite. This easy-to-use finite element package is used worldwide by top engineering companies and institutions in the civil and geotechnical engineering industry on projects of all ...

By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA). from PLAXIS - Geotechnical Finite Element Analysis Software Software line

SVSolid - 2D/3D Stress Deformation Modeling Software

SVSolid is designed for solving the stress state and deformations in soils under various loading conditions. It is a 1D, 2D and 3D finite-element program for engineering soil mechanics computations. SVSolid simulates the behavior or soil or rock which may undergo elastic or plastic deformations. SVSolid may ...

By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA). from Svoffice 2009 Software line

RokDoc - Geomechanical Software

RokDoc GeoMechanics adds geomechanical model building to rock physics and quantitative interpretation package. Understanding the stress state in the earth is of vital importance for well plan design, completions optimisation, cap rock integrity, and wellbore stability. Finding a prospect is only part of the ...

By Ikon Science Ltd based in London, UNITED KINGDOM.

STABView

STABView is a state-of-the-art commercial well planning software package for analyzing the risks of: Wellbore instability, Lost circulation and fracturing, Sand production and Fault, fracture or bedding plane slip. STABView will help you optimize the window of bottomhole pressure to drill, complete, stimulate and produce from vertical, deviated, and horizontal wells in all geological settings. ...

By Weatherford Geomechanics Services based in Calgary, ALBERTA (CANADA).

3DEC - Version 7.0 - Three-Dimensional Numerical Geotechnical Software

3DEC is a three-dimensional numerical modeling code for advanced geotechnical analysis of soil, rock, ground water, structural support, and masonry. 3DEC simulates the response of discontinuous media (such as jointed rock or masonry bricks) that is subject to either static or dynamic loading. The numerical ...

By Itasca International Inc. based in Minneapolis, MINNESOTA (USA). from Geotechnical Software Software line