Version G6 - Farmnavigator


G6 Farmnavigator is born from the partnership between AvMap, the Italian leader in GPS navigation since 1994 and Satconsystem, the specialist in high-tech tools for the agriculture. That’s why G6 Farmnavigator is the most complete GPS solution.

Farm Navigation

  • Ligthbar navigation with parallel and contour tracking
  • Sprayboom virtual switch command
  • Field perimeter and field area measurement
  • Soil sample positioning for Field Surveying
  • Jobs and fields database in Google Earth™ format

Road navigation

  • 100% portable with built-in GPS receiver
  • European maps
  • Turn-by-turn vocal instructions
  • Trip computer
  • Lane Assistant

Choose your GPS receiver

G6 Farmnavigator comes with an internal GPS receiver suitable for classic street navigation; for farming operations you can choose your favourite external GPS receiver. 

G6 Farmnavigator is compatible with any external GPS receiver sending  NMEA 0183 standard strings, through DB9 connection.   Antennas must be set to GGA, RMC, VTG, GSA, GSV, ZDA GPS output strings.

Compatible with AvMap external GPS receiver, as well as with GPS receivers from third parties:

Waterproof GPS receiver by AvMap

A U-Blox LEA5 5Hz DGPS receiver for rooftop stationary application, WAAS / EGNOS DGPS enabled. Precision: 20cm.  Price: 360 €  

Software features

Virtual spray boom commander

G6 Farmnavigator calculates the area that has already been treated and thanks to the virtual spray boom commander helps you saving chemical products, reducing costs and minimizing the environmental impact of your operations. You can set up the number of spray boom sections (up to 15 sections) and their length. After setting the sections you will see on the display which spray boom section has to be switched off to avoid overlapping. If the boom section is over an area that has already been treated, the section will be highlighted on the screen to warn that it has to be switched off, vice versa it will show when a section has to be opened again. This warnings are very useful when making a U turn or when trying to avoid an obstacle. The Virtual Boom section commander works in parallel mode, contour and Tramline mode!

Guiding lines: Parallel and Contour
You can easily set the tramlines for your operations choosing among parallel, contour guidelines or existing tramlines.

Parallel Tracking

In the Parallel Tracking mode, G6 Farmnavigator creates parallel tramlines on the screen along which you can drive. Press A to start and B to end: on the display the AB segment will be traced together with its parallel segments.

Contour Tracking

In the Contour Tracking mode, you can create the first tramline in a curved field, by pressing A to start and B to end, then this  tramline will be replicated over the whole field.

Existing Tramlines Tracking

In fields with existing tramlines or planted with row crops, you can switch the Farmnavigator to the Tramline mode. In this mode there is no navigation bar, but you can see the real time green track and it can be used to work with the virtual sprayboom switch.

Lightbar Navigation
According to the set tramlines, the Lightbar will show the driver if and how much the vehicle is off the track  so that he can adjust the trajectory at any time.

Perimeter and Area Measurement
To calculate the perimeter of  a field you are working on, just touch the Measure button to start and touch it again to close the measurement. The perimeter and area will be saved in the Job file.

Measuring Obstacles
During the navigation, you can save a mark point to signal obstacles or  soil sample positions. The mark points will be saved in the job file.

Jobs Database
When you start a new job, all its data (perimeter, area, treated area, obstacles, timing, maximum DOP and maximum speed) will be saved in a database. The job can be paused and estarted at any moment. You can see a data sheet for each job and you can export the database in the Google Maps™ format so that you can view it in Google Maps™ or Google Earth™.   

Rear view camera
The G6 Farmnavigator can be connected to an USB Rear View Camera. No need for extra displays as the camera uses the 4.8” display of G6 Farmnavigator If you need to check the functioning of the machine or to view behind a trailor just click on the touch screen the Camera button and the live video will appear on the display.


Dimensions (mm): 133 ,6 x 83,4 x 21
Weight: 270 g
Display: 4.8” LCD TFT ; 16:9
Touchscreen: Yes
Display Colors: 65536
Display resolution: 480 x 272 pixels
Automatic brightness control: Yes
GPS Receiver: Built-in u-blox LEA-5. Compatible with any external GPS receiver sending NMEA 0183 standard strings, through DB9 connection.
Processor: 520 Mhz
RAM: 64 MB
Memory Support: Secure Digital (SD)
Breath sensor for Alcohol Test: Yes
Battery: Built-in Li-Ion rechargeable battery
Power supply: With car charger 10/35 V throiugh the smart active mount
Built-in Speaker: Yes
Audio Output: Yes
Bluetooth: Yes
External GPS antenna serial Port: Yes
PC USB interface: Yes
Serial I/O port: Yes


Software update: Free
2D view: Yes
3D view: Yes
Night vision: Yes
Lat Lon search: Yes
Lightbar navigation with parallel and contour guidance: Yes
Field perimeter and area measurement: Yes
Jobs and fields database in Google Earth format: Yes
Audio Player: Yes
Video Player: Yes
Pictures viewer: Yes
Turn-by-turn vocal instructions: Yes
Save personal addresses (Mark points): Yes, up to 1000
Post codes and House number search: Yes
Import Speed Cameras database from external sources: Yes
Routing Options: Fastest, shortest, off road, fewer turns.
Avoid options: Yes
Lane Assistant: Yes
'DRIVE ME HOME' quick command: Yes

Customer reviews

No reviews were found for Version G6 - Farmnavigator. Be the first to review!