GSI Environmental Inc.

Version version 1.22 - Matrix Diffusion Toolkit Software


The Matrix Diffusion Toolkit, developed for the Department of Defense ESTCP program, is an easy-to-use, comprehensive, free software tool that can assist site personnel to effectively and efficiently estimate what effects matrix diffusion will have at their site, and transfer the results to stakeholders. The Toolkit provides the following tools to calculate and evaluate matrix diffusion effects:

quare Root Model
A module to provide planning-level estimates of the mass discharge (in units of grams per day) caused by release from a low-k diffusion-dominated unit (typically silt or clay) into a high permeability advection-dominated unit (typically sand or gravel). Estimates of concentration and mass remaining in the high permeability unit, after the source is removed, are also provided.

2) Dandy-Sale Model
A module allowing users to perform: 1) contaminant transport via advection and transverse diffusion in the transmissive layer, and 2) transport via transverse diffusion in the low-k zone. The module provides planning-level estimates of:

Low-k Zone:

  1. Aqueous, sorbed, and total concentration; and
  2. Aqueous, sorbed, and total mass.

Transmissive Zone:

  1. Aqueous, sorbed, and total concentration;
  2. Aqueous, sorbed, and total mass; and
  3. Mass discharge.

3) Matrix Diffusion Related Tools
An additional feature that provides a review of theory and methods related to matrix diffusion:

  1. NAPL Dissolution Calculator: a module that estimates the transverse diffusion of contaminants into the groundwater passing over the top of a Non-aqueous Phase Liquid (NAPL) pool and the transverse  diffusion of contaminants into the low-k unit underlying the pool;
  2. Plume Magnitude Information: a summary of the Plume Magnitude Classification System (Newell et al., 2011) and its application to site investigation and remediation;
  3. Low-k Zone Remediation Alternatives: a summary of current alternatives for the remediation of low-k zones; and
  4. 14-Compartment Model: a discussion on the quantitative application of the 14 Compartment Model (Sale et al., 2008a).

Additionally, the Square Root Model also utilizes a Monte Carlo-type approach to analyze uncertainty in the actual concentration, porosity, apparent tortuosity factor exponent, and retardation factor measurements. With this tool, groundwater practi


The Matrix Diffusion Toolkit provides a valuable tool for developing site conceptual models, supporting site characterization efforts, planning remedial designs, and determining if matrix diffusion will affect remediation goals for groundwater sites. The software can assist site personnel in updating or creating a more accurate conceptual site model, which will enable them to determine if matrix diffusion processes are significant enough to cause “rebounding” of downgradient plume concentrations above remediation goals after plume remediation or isolation is complete. Having this information available before a remedy is implemented could assist site stakeholders in selecting more appropriate remedies and effectively and efficiently addressing the potential issues of matrix diffusion with regulators. Furthermore, addressing extended remediation time frames caused by matrix diffusion would lead to savings in project costs.

Technical Support

Limited technical support is available from Shahla K.Farhat.

System Requirements

The Matrix Diffusion Toolkit requires a computer capable of running Microsoft® Excel (2007/2010) for Windows 7.

Operation requires an IBM-compatible PC equipped with a Pentium or later processor running at a minimum of 450 MHz. A minimum of 256 MB of system memory (RAM) is strongly recommended. Computers not meeting these recommendations will experience slow running times and/or problems with memory.

Customer reviews

No reviews were found for Version version 1.22 - Matrix Diffusion Toolkit Software. Be the first to review!