Soil & Groundwater Applications available in Newfoundland
-
Premium
Gas monitoring instruments and systems for engine emissions measurements
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Air pollution control for ventilation air methane industry
Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Gas monitoring instruments and systems for process NOx measurement
Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Energy Savings Solutions for Oxygen Industry
Measure and monitor your oxygen flow, pressure, temperature, and dew point, with VPInstruments oxygen sensors. Get insight into your oxygen consumption and optimize your system, monitor your consumption and allocate flow over your distribution network. VPInstruments’ sensors for oxygen are highly reliable and easy-to-use. We help manufacturers of oxygen generators, technical gas suppliers, oxygen infrastructure (piping, installation) companies, and end customers to respond to current increased ...
By VPInstruments based in Delft, NETHERLANDS.
-
Air Pollution Removal Orthopedic appliances Industry
Removal of acid gases and NOx from material surface treatments. Remove titanium dust from grinding, abrasive polishing and buffing operations. Emissions from high temperature ...
By Bionomic Industries Inc based in Mahwah, NEW JERSEY (USA).
-
Process analyzers & instruments for tail gas treating unit (TGTU)
By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA).
-
Moisture Monitoring for Instrument Air & Compressor Systems
The presence of humidity in a blanketing gas for sensitive instruments can cause corrosion problems, rapid changes incalibration and loss of sensitivity. The presence of oil contamination in compressors can cause similar ...
By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.
-
Chemical processing and leak mitigation solutions for pasteurizer/warmer/cannery cooling water systems industry
Chemical processing and leak mitigation solutions for pasteurizer/warmer/cannery cooling water systems industry. Failsafe Protection for Plant Operators using Toxic Chemicals. ChlorTainer provides plant safety for a variety of industrial plant ...
By ChlorTainer based in Santa Rosa, CALIFORNIA (USA).
-
Applications and Air Pollutants Removed for Wastewater Treatment Operations
For industrial and municipal treatment plants; Chemical scrubbers, biological towers and adsorption systems to remove hydrogen sulfide, mercaptans, other organic sulfur compounds and ammonia from digesters, pump stations, ponds, grit and screening works, sludge filter presses and dryers. Special Wet Electrostatic Precipitator for sewage sludge incinerators. Stripping ammonia and other volatile compounds. Decarbonization removal of carbon dioxide from ...
By Bionomic Industries Inc based in Mahwah, NEW JERSEY (USA).
-
Measurement solution for CFC abatement control via two stream FTIR system
CFC usage in industry Although the use of CFCs in domestic products has been widely phased out, CFCs chemicals still prove a vital ingredient in the production of insecticides and herbicides. Such products aim to increase the rate of crop production all over the world. All aspects of such a manufacturing process in relation to environmental impact must be well controlled. The use and pre-emission removal of CFCs in the intermediary steps of the insecticide production needs to be monitored with 100% ...
By Protea Limited based in Middlewich, UNITED KINGDOM.
-
Industrial solutions for cooling tower, boiler feed pretreatment
Cold Lime Softening: Hard water is water that has high mineral content. The name comes from the hard scale that forms when this water is boiled. It is not harmful to human health, but in the industrial setting it causes costly breakdowns in boilers, cooling towers, and other water handling equipment. The divalent cations Mg and Ca are the most frequently found minerals causing hard water. These ions enter water supplies by leaching from minerals in underground aquifers. ...
By WesTech Engineering, LLC based in Salt Lake City, UTAH (USA).
-
Measurement solution for measuring total VOC via FTIR
Current Total VOC Measurements The most common, and current standard, method for measuring Total Volatile Organic Compounds (VOC) is the use of a Flamed Ionisation Detector (FID). This gives a representative value of the total carbon content of a gas stream, as the FID cannot tell which specific organic compounds are ...
By Protea Limited based in Middlewich, UNITED KINGDOM.
-
Measurement solution for CFC analyser
CFCs are used in the manufacture of insecticides and herbicides and the environmental impact of their use must be well controlled. The treatment of CFC emissions to reduce the emissions in the intermediary steps of production needs to be monitored with 100% efficiency. Protea’s portable CFC analysers and continuous CFC monitoring systems can be configured with various sample inlets and analytical modelling to enable multi-samples to be measured on the one system. This means that both inlet and outlet to ...
By Protea Limited based in Middlewich, UNITED KINGDOM.
-
Integrated real-time gas analysis solution for semi-gases industry
CIC Photonics first applied its IRGAS technology to semi-gases when a major semiconductor equipment manufacturer, Applied Materials, requested a demo of its capability to monitor gas quality for epitaxial reactor applications; that was in year 2000. The IRGAS System met all of the technical requirements, which included ppb sensitivity for moisture as an impurity, gas cell chemical resistance to both acid and basic semi-gases, and fast concentration tracking time ...
By CIC Photonics based in Albuquerque, NEW MEXICO (USA).
-
Water monitoring instruments for environment & climate
Our systems provide you with ultra-reliability and low power consumption Remote Telemetry Units that are engineered to operate in extreme conditions and ...
By Ovarro based in Eckington, UNITED KINGDOM.
-
Activated carbons for air and gas industries
Carbon Activated Corporation supplies a complete line of high-capacity activated carbon for vapor phase and air applications such as odor control in municipal waste-water facilities, landfills and refineries, SVE (soil vapor extraction) projects and many other vapor related applications. We manufacture specialized carbon both impregnated and non-impregnated for applications such as H2S removal and the removal of any time of noxious ...
By Carbon Activated Corporation based in Compton, CALIFORNIA (USA).
-
Ozone Solution for Flue Gas Denitrification
The characteristics of ozone application in the oxidation and denitrification industry: Ozone has a high selectivity to NOx and a fast speed, and O3 can basically complete the oxidation of NO at 0.05s. The absorption of oxidized products should be strengthened by the spray absorption process at the back end. Without heating the flue gas, N2O5 is easily absorbed by the lye, and some heavy metals such as mercury and other heavy metal pollutants are also oxidized and removed by ozone. A high concentration of dust or ...
By Ozcon Environmental Consulting & Trade Ltd based in Edgbaston, UNITED KINGDOM.
-
Plastic Random Packing for Air Stripping
Air Stripping is the transferring of volatile components of a liquid into an air stream. This process is used for the purification of groundwater and wastewater containing volatile compounds. Air Strippers are usually packed towers operated with a countercurrent flow of water and air. The design for Air Strippers involves a packed tower which includes plastic random packing it its design. The size of the packed tower and plastic random packing is determined by the air to water flow rates. Since many of the ...
By KemFlo Canada Inc based in Ontario, ONTARIO (CANADA).
-
Alumina Balls for HOC Air Dryer
HOC Air Dryer is an energy efficient solution for industrial drying needs that can be installed and maintained at very low costs compared to contemporary alternate methods available. HOC stands for Heat OF Compression where the heat caused by the rapid compression of air is used as the source of heat for the purpose of drying. First introduced in the 1960’s this technology has been serving the needs of the customers for over 50 years. ...
By Activated Alumina Balls a Division of Sorbead India Pvt Ltd based in Vadodara, INDIA.
-
Mold & Grime Cleaner Prep and Mold Prevention Spray for HVAC Applications
Use fogger, airless sprayer, or hand pump sprayer with fine mist nozzle to disperse our Mold Prevention Spray into ductwork. First remove duct air filter and turn fan on. For large application jobs, we recommend using basic protective gear. Our products are non-toxic with zero VOCs but always best to be ...
By Hilltop Distribution, Inc. based in Camarillo, CALIFORNIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you