Soil & Groundwater Applications in Europe

  • Premium

    Water monitoring technology for oil & gas

    Monitoring natural water bodies surrounding oil and gas drilling activities like hydraulic fracturing is a key issue in environmental monitoring and regulatory compliance.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Air pollution control for the remediation industry

    The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM.

  • Premium

    Soil Remediation Plants for Soil and Groundwater Industry

    Contaminated soil and building-rubble can be efficiently treated with VacuDry technology, including a diverse range of toxic and hazardous substances. VacuDry units also have low emissions and low power consumption, making on-site treatment with our mobile units both economically and environmentally sound.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Water monitoring technology for mining

    Ensuring that pollutants from mining activities do not enter surrounding natural water bodies is a key issue in environmental monitoring and regulatory compliance.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Ozone Water Treatment for Soil and Groundwater Remediation Industry

    Man-made perfluorinated compounds, like PFOS/PFOA, are an increasing threat to our waters and the environment.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Water monitoring technology for groundwater

    Measuring groundwater level or depth-to-water is critically important for identifying long term trends, including declining water levels, saltwater intrusion, seasonal variations, aquifer recharge, artificial aquifer storage and recovery, and level status for drinking water. Receiving groundwater data via remote data transmission from one of the many OTT telemetry options available saves time and resources spent in the field.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Phosphorimetric determination of uranium in water

    Introduction The presence of uranium in water causes radiological pollution as all uranium radionuclides decay by both alpha and gamma emissions. Chemical aspects of uranium toxicity include mainly nephritis and other renal diseases. Mentioned harmful features affect on humans even in low concentrations thus requiring sensitive analysis methods.

    By Lumex Instruments Group Office in Wakendorf II, GERMANY.

  • Premium

    Determination of mercury in soil, bottom sediments, and geological materials

    INTRODUCTION Analysis of soils and bottom sediments for mercury content is one of the most common analyses in the monitoring of environmental pollution. Background mercury concentrations in these objects are 10–100 μg/kg and in the polluted areas they exceed 10,000 μg/kg.

    By Lumex Instruments Group Office in Wakendorf II, GERMANY.

  • Premium

    Electrochemical solutions and water technologies for corrosion prevention

    Today, many man-made structures using steel face harsh futures from the ravages of their natural enemy-corrosion. The cost of corrosion has proven to be almost incalculable as it shortens the life of almost any structure using steel. De Nora’s cathodic protection anodes, marketed under the trade names of LIDA and ELGARD, provide customers with a solution to this problem.

  • Premium

    Soil monitoring for laboratories

    Soil monitoring is used to facilitate the selection of fertilizer composition and dosage for land employed in agricultural as well as horticultural industries.

    By GE Healthcare Life Sciences Office in Little Chalfont, UNITED KINGDOM.

  • Premium

    Deep well level measurement for ground water industry

    Application: Deep drilling 150 m. Bore diameter 30 mm.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Anaerobic water purification systems for sulphate removal/recovery

    Sulphate is a common chemical in industry.

    By Paques B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Mercury monitoring for on-site remediation

    Fugitive emissions can be a health concern during removal and disposal of mercury-contaminated material at remediation sites. Thus, remediation projects either indoors or outdoors often require on-site, real-time mercury air monitoring with a Tekran 2537. This assures permitted levels are not exceeded during waste processing and human exposure levels are below government regulated toxicity thresholds. Often multiple sites must be monitored continuously. The Tekran 1115 Multi-Port Sampler is the ideal tool for...

    By Tekran Instruments Corporation Distributor in GREECE.

  • Premium

    Pressure Sensor for Ground and surface water

    STS has been a hydrologist partner for many years, and through this work we have developed the experience to become specialists in the monitoring of river, lake and ground water levels. Measuring groundwater level is critically important for identifying long term trends, including declining water levels, saltwater intrusion, seasonal variations, aquifer recharge, artificial aquifer storage and recovery, and level status for drinking water.

    By STS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND.

  • Premium

    Hydrological, meteorological and oceanographic monitoring instruments for soil monitoring

    Over the past few decades, soil monitoring has become increasingly important. Environmental factors such as climate change, dwindling water resources, and threatened habitats are driving the need to monitor the environment and implement better policies to protect it. Many natural processes in the environment are driven by or in some ways related to soil hydrological processes. Monitoring soil moisture conditions provides important information for the protection of, and in the understanding of local and regional...

    By Stevens Water Monitoring Systems, Inc. Distributor in C.P., SPAIN.

  • Premium

    Water monitoring equipment for Groundwater monitoring industry

    Collect the most accurate short- and long-term water level and water quality data for your project using In-Situ equipment. We design and manufacture every instrument to perform under harsh conditions for years.

    By In-Situ, Inc. Office in West Midlands, UNITED KINGDOM.

  • Premium

    Sampling and drilling equipments for the mining industry

    AMS, Inc. has been a leading provider of high quality sampling equipment since 1942. AMS sampling equipment is primarily used for environmental, geotechnical, and remediation uses as well as soil, soil gas, and groundwater monitoring. In addition, AMS makes PowerProbe direct push/hollowstem auger drill rigs for environmental and geotechnical drilling activities. AMS also manufactures and offers direct push tooling, drilling equipment, accessories, and expendables for soil sampling, groundwater sampling and...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) Distributor in Berkshire, UNITED KINGDOM.

  • Premium

    Water monitoring instruments for groundwater monitoring

    Low flow groundwater sampling is a methodology used around the world to simulate ambient flow conditions and take water quality readings. A wide variety of pumps are used to draw a sample from the well such as bladder, inertial or peristaltic pumps and usually combined with a flow controller. Once the sampling methodology for your site has been selected, then choosing the right multi-parameter probe is vital.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you