aquifer remediation (Aquifers) equipment in USA

  • MAGRO - Magnesium Peroxide

    The oxygen release compound, commonly known as Magnesium Peroxide (MgO2), raises the dissolved oxygen concentration of aquifers, thereby creating conditions which may stimulate indigenous, petrophilic microbes to aerobically degrade petroleum contamination to carbon dioxide and water. Typical environmental remediation applications: soil ...

    By Kingsfield Inc. based in Old Tappan, NEW JERSEY (USA). from Water/Soil Treatment Product line

  • Substrate Release Composition (SRC)

    Source-area bioremediation for chlorinated solvents is complicated by the complex migration of DNAPLs and the high proportion of sorbed-phase contaminant mass in the aquifer media compared to the relatively minor CVOC mass in ground water. Desorption of aquifer bound CVOCs is typically the rate-limiting factor for source-area remediation, such ...

    By Geovation Engineering, P.C. based in Florida, NEW YORK (USA).

  • WATERLOO - Model APS - Vertical Aquifer Profiling Tool

    Lack of a sufficient understanding of the subsurface conditions often leads to underperforming remedies. Development of a valid Conceptual Site Model (CSM) is the single most important activity for ensuring that sound site management decisions, including remedy selection and design, are made.

    By Cascade Drilling / Cascade Environmental based in Bothell, WASHINGTON (USA).

  • Weston - In Situ Recirculating Well Technology

    Recirculating Well Technology is an in situ system for remediating contaminated aquifers. This technology is based on a very simple concept and design where downhole equipment creates movement of groundwater into and back out of the well after treatment. This movement develops a groundwater circulation cell around a remediation well. The ...

    By Weston Solutions, Inc based in West Chester, PENNSYLVANIA (USA). from Onsite Remediation Technology Product line

  • PeroxyChem - In Situ Geochemical Stabilization (ISGS) Technology

    In Situ Geochemical Stabilization (ISGS™) technology utilizes a permanganate-based solution to geochemically stabilize dense non-aqueous phase liquids (DNAPL) in the aquifer. Permanganate and other proprietary reagents are mixed into an aqueous solution that can be injected into an aquifer either through existing wells or direct push ...

    By PeroxyChem based in Philadelphia, PENNSYLVANIA (USA). from Soil & Groundwater Remediation Product line

  • Combination of In Situ Thermal Desoption or Electrical Resistance Heating and Steam Enhanced Extraction

    Combining In Situ Thermal Remediation technologies provides an optimal solution for many sites. Steam Enhanced Extraction (SEE) may be combined with either Electrical Resistance Heating (ERH), or with In Situ Thermal Desorption (ISTD). Together these combinations comprise a glove-fit design for sites with complex geologies (e.g., silty clay ...

    By TerraTherm - a Cascade Company based in Gardner, MASSACHUSETTS (USA).

  • Metals Remediation Compound (MRC)

    Metals Remediation Compound (MRC) removes metals such as dissolved Cr(VI) from groundwater via in situ immobilization (precipitation and/or sorption to soil particles). MRC consists of an organosulfur compound esterified to a carbon backbone. This organosulfur ester is embedded in a polylactate matrix, making MRC a thick, viscous liquid. Upon ...

    By Regenesis based in San Clemente, CALIFORNIA (USA). from Metal Immobilization Product line

  • BioSolve - Hydrocarbon Mitigation Technology

    BioSolve® Hydrocarbon Mitigation Technology is specifically engineered for the mitigation and elimination of hydrocarbon based problems across a wide array of industries and applications. Whether its Spill Clean Up, Vapor Suppression, Tank Degassing & Cleaning, Bioremediation of Soil/Water, Surfactant Enhanced Aquifer Remediation, Surface ...

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Penney - Groundwater Aeration For Removing Volatile Organic Compounds

    Groundwater aeration, air sparging, or in-place air stripping is a proven remedial technology for removing volatile organic compounds from groundwater. Ambient air is usually forced into the upper portion of a shallow groundwater aquifer through an injection well or sparger. A regenerative blower, a positive displacement blower or an oil-less ...

    By Penney Engineering, Inc. based in Mansfield, MASSACHUSETTS (USA).

  • N-Blend/DBB

    Denitrification-based bioremediation (DBB) is a unique approach to bioremediation that uses nitrates as both electron acceptors and sources of nutrient nitrogen to promote anaerobic biodegradation and oxidation processes in soils, aquifer media and ground water contaminated with gasoline, diesel fuel, home-heating oil and other relatively low ...

    By Geovation Engineering, P.C. based in Florida, NEW YORK (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you