Groundwater Table (Aquifers) Equipment Available In Quebec
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The piston sampler differs completely in design and application from the augers described before and is very suitable for sampling less cohesive soil layers (sand) below the groundwater table. The piston sampler is also suitable for sampling sediments with a sand ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
research. It can carry out drillings to a depth of 5 metres, depending on the depth of the groundwater, the build-up of the soil and the nature of the material to be drilled into. For every type of soil above or under the groundwater table there is an auger type that is specifically suited to that situation. During the drilling process changes ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil sampling and classification set, standard set to a depth of 2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This bi-partite gouge auger distinguishes itself from other gouges by the cylindrical tapered cutting head at the bottom side of the gouge that, when the auger is pushed into the soil, cuts a cylinder shaped piece from the soil. As a result the auger does not need to be revolved around its axis after being inserted, as the other gouge augers need to be (less sensitive to torsion). The tapered ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample ring kit model C, standard set to a depth of 2 m. For soil sample rings Ø 53 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In case of direct measurement in the field the auger hole method according to Hooghoudt can be applied.Following this method the determination of the permeability to water of a soil takes little time (by comparison to other methods), requires a limited number of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Flap gouge auger for depth specific samplings in dry or wet material, standard set to a depth of 2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample ring kit model E, with heavy duty sample ring holder for sampling in hard soils. Standard set for a depth of 2 m. For soil sample rings Ø 53 mm. ...
-
ShowcaseManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Core cutter method, according to Dutch RAW-standard 2010, test no. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Grass plot sampler large, Ø 23 mm, operational length 10 cm, total length 95 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The profile sampler allows taking of a sizeable and virtually undisturbed sample up to a depth of approximately 40 cm (10 cm wide and 5 cm across). All roots, up to a cross-section of 2 cm, are included in the sample. When sampling, both U-shaped gutters are pushed alternatingly into the soil, until the required depth is reached, after which one side of the handle is pulled sharply upwards and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In case of direct measurement in the field the auger hole method according to Hooghoudt can be applied.Following this method the determination of the permeability to water of a soil takes little time (by comparison to other methods), requires a limited number of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Eijkelkamp percussion drilling set for heterogeneous soils with gasoline powered percussion hammer (Cobra TT), is standard equipped for drilling to a depth up to 5 meter. The complete set contains: a gasoline driven percussion hammer with accessories and wooden transport box, various extension rods, coupling sleeves, percussion gouges (combination type for various types of soil) in various ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With the percussion drilling set for heterogeneous soils with heavy electrical percussion hammer (HM 1812), the percussion gouges are hammered into the soil using an electrically driven percussion hammer with 72.8 Joule strike capability. The advantages of this hammer are: no petrol vapours and exhaust gasses directly over the sample. The set contains: an electrically driven percussion hammer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
A correctly dosed fertilization is a condition for high yield and good quality. From economic and ecological perspectives it is therefore necessary to check the state of the soil. After analysis of the samples taken with this set it is possible to determine a fertilization program. Two gouge augers have been included in the set for sampling top ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil column cylinder auger, type Stiboka. Set for sampling to a depth of 1 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Eijkelkamp Soil & Water composed a prospecting kit for general geological surveys. The kit can be used for augerings in heterogeneous soils (agricultural and environmental soil research), to improve the mobility it comprises less different auger types. In this way it can be transported in a carrying bag. All augers, handles and extension rods are packed in a backpack. With this standard kit ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston sampler, set for sampling to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you