Groundwater Table (Aquifers) Equipment Available In Congo, Democratic Republic Of The
-
ShowcaseManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
research. It can carry out drillings to a depth of 5 metres, depending on the depth of the groundwater, the build-up of the soil and the nature of the material to be drilled into. For every type of soil above or under the groundwater table there is an auger type that is specifically suited to that situation. During the drilling process changes ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Grass plot sampler large, Ø 23 mm, operational length 10 cm, total length 95 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In case of direct measurement in the field the auger hole method according to Hooghoudt can be applied.Following this method the determination of the permeability to water of a soil takes little time (by comparison to other methods), requires a limited number of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The piston sampler differs completely in design and application from the augers described before and is very suitable for sampling less cohesive soil layers (sand) below the groundwater table. The piston sampler is also suitable for sampling sediments with a sand ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil column cylinder auger, type Stiboka. Set for sampling to a depth of 1 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
These stainless steel gouge augers with different dimensions consist of a steel auger pipe, a collecting bucket and a stick with a steel handle. The auger pipe is filled by pressing the collecting bucket with your foot. Because of the conical shape of this pipe the sample is easily pushed toward the collecting trough when the next sample is taken. The correct number of samples per hectare ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
The StormTank Module 25 Series is the flagship product of the StormTank brand, offering a stormwater management solution rated for extreme load applications. It can be sized and configured to fit nearly any site layout. With up to 97% void space and a stackable design, the system minimizes installation footprint while allowing for management of large volumes of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van der Horst core sampler. Set for sampling to a depth of 7 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil sampling and classification set, standard set to a depth of 2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample ring kit model E, with heavy duty sample ring holder for sampling in hard soils. Standard set for a depth of 2 m. For soil sample rings Ø 53 mm. ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Measure excess pore pressure that is generated during soil penetration with our digital CPTU piezocone testing system. In the quotations, Gouda Geo-Equipment issues a clear distinction is made between on one hand the CPT penetrometer pusher (this could either be a truck-based, crawler-based, trailer-based or stand-alone unit) and on the other hand the CPT system (this could either be mechanical ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the hammer with two nylon heads (shock-absorbing) or ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Core cutter method, according to Dutch RAW-standard 2010, test no. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With the percussion drilling set for heterogeneous soils with heavy electrical percussion hammer (HM 1812), the percussion gouges are hammered into the soil using an electrically driven percussion hammer with 72.8 Joule strike capability. The advantages of this hammer are: no petrol vapours and exhaust gasses directly over the sample. The set contains: an electrically driven percussion hammer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Flap gouge auger for depth specific samplings in dry or wet material, standard set to a depth of 2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This bi-partite gouge auger distinguishes itself from other gouges by the cylindrical tapered cutting head at the bottom side of the gouge that, when the auger is pushed into the soil, cuts a cylinder shaped piece from the soil. As a result the auger does not need to be revolved around its axis after being inserted, as the other gouge augers need to be (less sensitive to torsion). The tapered ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Eijkelkamp percussion drilling set for heterogeneous soils with gasoline powered percussion hammer (Cobra TT), is standard equipped for drilling to a depth up to 5 meter. The complete set contains: a gasoline driven percussion hammer with accessories and wooden transport box, various extension rods, coupling sleeves, percussion gouges (combination type for various types of soil) in various ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Root research is executed to improve the insight in the possibilities for root growth (depth and concentration) of the root system of trees and plants. In general it is important to all plants to have a dense and extensive root system in the soil. An extensive root system allows the plant to benefit from a large volume of soil. If sufficient quantities of nutrients and water are present the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting jack with lever and chain. The split tube sampler ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you