Auger Drill Equipment For Soil And Groundwater Available In Vatican City
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN lightweight CPT penetrometer set is an economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by AMS, Inc.based in USA
This one-piece regular soil auger is powder-coated (orange) for rust resistance. The auger comes equipped with a 16" rubber-gripped cross handle and has a total length of 53". The lightweight (4 to 5 lbs) one-piece regular soil auger is an inexpensive alternative to our auger-extension-cross handle systems for anyone not needing to go deeper than 4 feet. This one-piece soil auger has carbon steel ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids, with flow detection and process temperature ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Stone catcher: This auger type is used to remove loose stones from the auger ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. The gouge augers have a mutual quality, they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in diameter. The most suitable length depends on the penetration ...
-
PremiumManufactured by AMS, Inc.based in USA
This thick, one-piece design, with its unique, hand-formed aggressive cutting head, pulls itself into the ground with little effort from the user. The One-Piece Open-Face Auger quickly penetrates through combination soils, from mud or clay to hard pan. The open-face design is especially useful for obtaining quick visual profiles and provides for easy soil extraction. The attached 16" ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids. Sensors for continuous moisture measurement and installation on conveyor belts, screw feeder or hoppers. Two types of sensor-technology to cover a wide range of applications. Both sensors penetrate the product for most reliable measurements. ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 110 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Determination of the shear strength of a soil is a commonly used method to determine the structural strength of that soil. The electric vane tester is an excellent field instrument for in-situ measurement and evaluation of the undrained shear strength (su) and the remoulded shear strength. Furthermore it gives a good indication of the over-consolidation ratio, the stress-strain relationship and ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by AMS, Inc.based in USA
This cleanout tool is used for ejecting soil from the AMS Open-Face Auger and the AMS One-Piece Open-Face ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The ergonomic hand auger set for heterogeneous soils is used to carry out manual drilling and sampling in a great variety of different soils in an ergonomically sound way. It is particularly suitable for general soil investigation (description of the layering, geology, archaeology) as well as taking samples for such activities as environmental research. It can carry out drillings to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The spiral auger operates similar to a corkscrew and does not cut off the soil. The auger is usually applied when hard layers need to be penetrated. The spiral auger has a negative end, i.e. the centre of the auger end is whetted away. For profile research (soil mapping) the spiral auger is seldom used. Its use is confined to augering through very hard layers, e.g. boreore, brick layers, chalk ...
-
PremiumManufactured by AMS, Inc.based in USA
Save time and energy in soil conditions where soil probes & slide hammers just won’t get the job done! The AMS Compacted Soil Sampler works great for obtaining “composite” soil samples in hard compacted and frozen soils. The 1-1/16” x 21” Flighted Auger with carbide bit may be connected to any ½” chuck drill. The entire unit assembles/disassembles in ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A 200 kN trailer-based CPT penetrometer rig is a lightweight and economical rig with full CPT testing capabilities. It is suitable for both electrical and mechanical CPT testing. It can be towed easily by a 4-wheeldrive car. It comprises a sturdy 2-axle trailer base, a 2-cylinder CPT penetrometer pusher, a diesel-hydraulic power-pack with load-sensing pump, manually operated valves, a work ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 150 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by AMS, Inc.based in USA
Save time and energy in soil conditions where soil probes & slide hammers just won’t get the job done! The AMS Compacted Soil Sampler works great for obtaining “composite” soil samples in hard compacted and frozen soils. The 1-1/16” x 21” Flighted Auger with carbide bit may be connected to any ½” chuck drill. The entire unit assembles/disassembles in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The typical design of the Edelman auger allows for a minimum of friction during penetration into the soil, and the extraction of the auger from the soil, which means less physical effort. To achieve optimal results, the auger type should be chosen in respect of the soil type in question. ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS 2" flighted auger kit is equipped to drill access holes up to 9' deep. The included 1 1/2" x 6" soil core sampler may then be used to collect soil samples in liners. Additional extensions may be added to obtain deeper depths. Kit Includes Bosch 11245, 5/8" threaded male to SDS Max adapter, 1 1/2" x 6" soil core sampler, slide hammer, 2" flighted lead auger with hard surfaced tip, 2" ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Purpose designed hydraulic wrench for driving ground anchors of the 100 kN and 200 kN stand-alone and trailer-based CPT penetrometer rigs into and out of the ground. To be operated by 2 persons. The hydraulic power for the wrench is supplied by the power-pack of the CPT penetrometer ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you