Auger Drill Equipment For Soil And Groundwater In Costa Rica
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The ergonomic hand auger set for heterogeneous soils is used to carry out manual drilling and sampling in a great variety of different soils in an ergonomically sound way. It is particularly suitable for general soil investigation (description of the layering, geology, archaeology) as well as taking samples for such activities as environmental research. It can carry out drillings to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Stone catcher: This auger type is used to remove loose stones from the auger ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The typical design of the Edelman auger allows for a minimum of friction during penetration into the soil, and the extraction of the auger from the soil, which means less physical effort. To achieve optimal results, the auger type should be chosen in respect of the soil type in question. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This design is very suitable for augerings in hard, stiff soils, mixed with fine gravel both above and below the ground water level. The very sharp extremities of the auger bits point at an angle downwards. This design makes the auger go through the soil ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. The gouge augers have a mutual quality, they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in diameter. The most suitable length depends on the penetration ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The typical design of the Edelman auger allows for a minimum of friction during penetration into the soil, and the extraction of the auger from the soil, which means less physical effort. To achieve optimal results, the auger type should be chosen in respect of the soil type in question. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The spiral auger operates similar to a corkscrew and does not cut off the soil. The auger is usually applied when hard layers need to be penetrated. The spiral auger has a negative end, i.e. the centre of the auger end is whetted away. For profile research (soil mapping) the spiral auger is seldom used. Its use is confined to augering through very hard layers, e.g. boreore, brick layers, chalk ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Drilling a bore hole is often combined with sampling and describing a profile. If both these activities are not necessary during the drilling procedure then drilling can be executed fast and efficient applying the so-called lost cone drilling method. Eijkelkamp Soil & Water developed a manually controlled set using an electrical percussion hammer to hammer the lost cone and the accompanying ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard bailer boring auger set is suitable for augerings to a depth of about 7 meter. The set is very suitable for in addition to exploratory soil augering and sampling inserting monitoring well pipes for groundwater level measurements and for sampling. This compact set can be carried easily in a station car and is easy to use in the field. It can be used by one person. The set contents ...
-
Manufactured by N&N Drilling Supply Mfr.based in USA
Whether you’re in geotechnical, environmental, exploration or the construction industry N&N Drilling Supply has a variety of auger equipment and accessories used for soil sampling, ground water monitoring, construction and mining ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you