Bedrock Equipment For Soil And Groundwater Available In St. Kitts & Nevis
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620LF Bubble Gun uses Low-Frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate sediments. Low power requirements and small sub-system component size make this a valuable tool for any survey ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The MidRotoSonic XL MAX DUO (MRS XL MAX DUO) is a larger version of the CRS XL, with two different drill heads. The MidRotoSonic XL MAX DUO accommodates a MidRotoSonic 50k drill head and a four-speed Rotation drill head. Both heads are mounted on a hydraulic side shift. The MRS XL DUO accelerates drill speed, capacity and boosts your productivity. The DUO option will allow sonic drilling in all ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 Bubble GunIM systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 ORD Bubble Gun systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
Manufactured by Wuhan Sinorock Technology Co., Ltdbased in CHINA
RSM-SWS is suitable for complex geophysical and testing sites. A firm imported chassis with aesthetic appearance is used. The product is designed with anti-vibration, moisture-proof,and dust-proof capabilities. Combining advantages of similar products from China and abroad, the RSM-SWS surface wave tester features small size, light weight and high portability Therefore, it is suitable for complex ...
-
Manufactured by IRIS Instrumentsbased in FRANCE
The SYSCAL R1 Plus resistivity meter is specifically designed for medium-depth exploration. It combines a power source, transmitter up to a 200W or 800Vpp output voltage, and a 2 channels receiver in a single unit; its compactness makes it an effective tool for intensive resistivity surveys. The measurement is fully automatic, controlled by a microprocessor: automatic self-potential correction, ...
-
Manufactured by Pilot Diamond Tools Ltd.based in CANADA
These three grades are formulated to offer successive increases in life for a given formation and may be selected either for repeat use, or for additional assurance that bedrock will be reached without the need to withdraw the casing to replace the ...
-
Manufactured by IRIS Instrumentsbased in FRANCE
The Syscal Junior is an all-purpose resistivity and induced polarization sounding and profiling system for environmental applications. The system is supplied as a standard sounding system capable of recording two measurements simultaneously, perfect for performing offset Wenner sounding arrays. The output current is automatically adjusted (automatic ranging) to optimize the input voltage values ...
-
Manufactured by Giddings Machine Company Inc.based in USA
This model mounts on a Cat #2 or #3 tractor 3 pt. hitch. Machine is powered by Tractor PTO through hydraulic pump and drive assembly provided with ...
-
Manufactured by Giddings Machine Company Inc.based in USA
All fixtures are designed to be mounted on a Polaris Ace 4x4 All Terrain Vehicle. This model is self-powered by a 22 HP OHV V-Twin Honda Air Cooled Gas Engine, equipped with 12 volt starter and alternator. Coring machine power is completely separate from ATV engine and fuel system. Complete Coring/Drilling Machine is constructed of aluminum. ...
-
Manufactured by Tersus Environmental, LLCbased in USA
Our anionic surfactant formulations have the unique ability to selectively desorb and liberate sorbed petroleum hydrocarbons from soil and fractured bedrock surfaces allowing for their improved mass recovery and or improved treatment by other remediation techniques. Supported by nearly two decades of research and formulation testing at the University of ...
-
Manufactured by Changsha Exploration Machinery Factorybased in CHINA
GY-50-1 portable engineering drill is adopted with hydraulic pressure feeding structure, it can proceed attacking and gyrating drilling, and can be towing removal. The drill is usually used for the engineering geological reconnaissance in road、bridge foundation、dam site、prospecting, or industrial and civil architecture, it can also used in drilling exploratory blast hole. The ...
-
Distributed by Geomatrix Earth Science Ltdbased in UNITED KINGDOM
Through recording the magnetic susceptibility & conductivity of exposed bedrock it is possible to construct a comprehensive infield assessment of the changes to geochemical and mineralogical composition along outcrops, thus ensuring complex lenses, enclaves and other bodies are identified and mapped correctly. The Terraplus KT-10 magnetic susceptibility & conductivity meters are tailored towards ...
-
Manufactured by Giddings Machine Company Inc.based in USA
All fixtures are designed to be mounted on a Polaris Ace 4x4 All Terrain Vehicle. This model is self-powered by a 20 HP OHV V-Twin Honda Air Cooled Gas Engine, equipped with 12 volt starter and alternator. Coring machine power is completely separate from ATV engine and fuel system. Complete Coring/Drilling Machine is constructed of aluminum. ...
-
Manufactured by Dynadrill Equipment Pvt. Ltd.based in INDIA
Dynadrill O-Dex systems for DTH hammers are designed to drill and case simultaneously through overburden, passing easily through large boulders, pulling lightweight, inexpensive casings behind them. On reaching the bedrock or required depth, the drillstring is removed easily from the hole, leaving the casings in place. Drilling into the bedrock can then be continued using a normal drill ...
-
Manufactured by Guideline Geobased in SWEDEN
The ABEM Terraloc Pro is a versatile seismograph that can be used with any type of seismic accessory for every possible application. Typical applications are depth to bedrock, bedrock quality, soil stability studies, finding fractures and weak zones, and geological mapping. In all these applications the seismograph is triggered by ground vibrations created by an energy source. Time is then ...
-
Manufactured by Aquadatabased in TURKEY
Single channel resistivity, SP data at highest possible accuracy. The complete Resistivity System has a transmitter unit , a receiver unit and four cable reel assemblies with four electrodes and two pots.The DC-RVA1 digital resistivity meter is used to obtain profile of subsurface conditions , bedrock depth , changes in soil strata and to indicate differences in soil layers at the test site. It ...
-
Manufactured by Seal Checkbased in LITHUANIA
SEAL-CHECK.PRO, the premier provider of world-class package leak detectors, is dedicated to serving the food and pharmaceutical industries with advanced leak detection solutions. Our goal is to empower these sectors to uphold the highest standards of product safety and quality through impeccable leak detection technology. ...
-
Manufactured by Sensors & Software - an SPX Corporation brandbased in CANADA
pulseEKKO® GPR systems provide unparalleled performance with a wide-range of frequencies for applications ranging from deep mineral exploration and glaciology to high-resolution geotechnical investigations and concrete ...
-
Manufactured by EST Analyticalbased in USA
Hydraulic fracturing, also called fracking, is a well stimulation technique involving the fracturing of bedrock formations by a pressurized liquid. The process creates cracks in the deep-rock formations through which natural gas, petroleum, and brine will flow. According to the US Environmental Protection Agency, the Clean Water Act applies to surface stream discharges from shale gas wells. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you