Chlorinated Compound Remediation Equipment For Soil And Groundwater Available In Marshall Islands
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Accessory to Measure Volatile Organic Hydrocarbons in Water with a GC. Synspec Water Purge Unit (WPU) has been specifically developed to strip volatile organic hydrocarbons from water, and should be used in combination with a Synspec gas chromatography (GC) system. By using this combination of a WPU with a GC it is possible to determine the concentrations of hydrocarbons in ...
-
PremiumManufactured by Avecom NVbased in BELGIUM
Are you grappling with the challenge of chlorinated volatile organic compounds (Cl-VOCs) contaminating your soil and groundwater? Environmental compliance has become a pressing concern for businesses worldwide. Stringent regulations demand active measures to address the presence of hazardous pollutants like chlorinated VOCs. That’s where Multidechlorobac steps in as your trusted ally, ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT LT is a seamless, spray applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT® LT is installed under slab and on below grade vertical walls as a vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT® LT spray-application directly to penetrations, footings, grade beams, ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Biofouling is a major problem for the efficient operation of an open cooling water system. Slime produced by bacteria can very quickly form strong stable biofilm on heat exchanger, pipework and tower fill surfaces with really undesired consequences: Fast development - can be within days. Decrease heat transfer - 1µm of biofilm = 5 – 10 % less heat transfer. Decreased Flows – ...
-
PremiumManufactured by CETCObased in USA
For high-risk underslab and below-grade vertical walls, LIQUID BOOT® PLUS combines traditional Liquid Boot® spray-applied membrane with high-performance VI-20™, a 20-mil polyethylene-EVOH copolymer membrane, to form a superior vapor intrusion barrier that’s ideal for VOCs including BTEX and chlorinated solvents. Even greater contaminant resistance is achieved when LIQUID BOOT ...
-
PremiumManufactured by Fluence Corporationbased in USA
A diamond-shaped, open-ended design maximizes bubble-shearing action and offers a simple approach to solving clogging issues. CYCLONE coarse bubble diffusers are easy to install, require no scheduled maintenance, and are perfect for any coarse bubble system. The Cyclone is a proven performer. It’s easy to install and needs no scheduled maintenance, which makes it perfect for any coarse ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s thermal and catalytic oxidizer technologies are capable of destroying halogenated organic acids and mixed organic vapor contaminants that are discharged from a variety of industrial process streams. We have also developed several destruction devices specifically for soil and groundwater remediation sites contaminated with chlorinated compounds such as carbon tetrachloride, ...
-
Manufactured by Olin Corporationbased in USA
We are the No.1 global manufacturer of Ethylene Dichloride (EDC). As such, our supply of EDC offers the reliability and quality you need, backed by the local customer support Only Olin can provide, virtually anywhere in the ...
-
Manufactured by Land Science- a division of REGENESIS, Incbased in USA
Nitra-Seal incorporates a nitrile-modified spray applied core and dual polyethylene sheets. The Nitra-Base+ layer (bottom) and the Land Science Bond layer (top) are composed of a polyethylene material bonded to a geo-textile on the out-facing side. Polyethylene is known for chemical resistance, high tensile strength, excellent stress-crack resistance and for highly reliable subsurface ...
-
Manufactured by Evonik Active Oxygens (fka PeroxyChem)based in USA
MetaFix Reagents are customized formulations of reducing agents, reactive minerals, mineral activators, catalysts and pH modifiers to cost effectively address heavy metals at even the most challenging sites. MetaFix is capable of treating comingled plumes of multiple heavy metals and chlorinated ...
-
Manufactured by Evonik Active Oxygens (fka PeroxyChem)based in USA
Klozur persulfate is the oxidant of choice for in situ chemical oxidation (ISCO), because of its ability to treat a wide range of contaminants including chlorinated solvents, petroleum and PAHs. When properly activated, Klozur persulfate provides an unmatched combination of oxidative power and control that can be delivered both safely and cost effectively, demonstrated by application sites across ...
-
Manufactured by Evonik Active Oxygens (fka PeroxyChem)based in USA
EHC® Metals Reagent is a remediation product for immobilization of metals combining controlled-release carbon, micro-scale zero-valent iron & a slow-release of sulfate. Following placement of EHC Metals Reagent into the saturated zone, a number of chemical and microbiological processes combine to create strongly reducing conditions under which a number of heavy metals are sequestered via ...
-
Manufactured by Beirens SASbased in FRANCE
BEIRENS welded exhausts ensure the perfect safety, improved performance and good structural resistance of your installation. 100 % watertight, thanks to a continuous welding, BEIRENS exhausts are in compliance with standards in force. BEIRENS welded exhausts can be used to connect all types of new or existing appliances: engines, turbines, furnaces, boilers and fans. They are suitable for use ...
-
Manufactured by TerraStryke Products LLCbased in USA
TerraStryke TPHENHANCED will Enhance the bioavailability of sorbed, residual source mass, effectively getting the rebound out upfront. Expedite the destruction of dissolved-phase petroleum hydrocarbons, effectively enhancing realization of long-term site compliance objectives. Minimize on-site impacts and the need for aboveground equipment, allowing for redevelopment concurrent with remediation. ...
-
Manufactured by RNAS Remediation Productsbased in USA
A Balance of Fast and Slow Release Electron Donors. Newman Zone is Proven: Newman Zone was the first EVO bioremediation product on the market and tens of millions of pounds have been successfully used around the world. Newman Zone is a blend of fast and slow release electron donors proven effective in treating chlorinated solvents and other ...
-
Manufactured by Remediation Products Incorporated (RPI)based in USA
BOS 100 is a Trap & Treat in situ remediation technology specifically designed to degrade chlorinated solvents. It is a unique material manufactured from high grade virgin carbons (intended for use in food or drinking water applications). The food grade carbon is impregnated with metallic iron formed under reducing conditions at a temperature of roughly 850 degrees C. At this temperature, as ...
-
Manufactured by Filtration Systems, Division of Mechanical Mfg. Corporationbased in USA
Antimicrobial agent inhibits the growth of broad-spectrum bacteria, fungi, protozoa, and yeast on the treated layers, Antimicrobial agent lasts the life of the filter, Non-Toxic and insoluble in ...
-
Manufactured by NMT Electrodesbased in SOUTH AFRICA
NMT Electrodes is a leading manufacturer and supplier of Mixed Metal Oxide and Platinised Titanium Anodes for use in the production of Sodium Chlorate and Potassium Chlorate, both of which are used extensively in the pulp and paper manufacturing industry as an environmentally friendly alternative to conventional bleaching ...
-
Manufactured by Microbial Insights, Inc.based in USA
Detect and quantify bacteria responsible for biodegradation of Chlorinated Methanes. Chlorinated methanes including carbon tetrachloride (CT), chloroform (CF), and dichloromethane (DCM) were widely used as solvents, degreasers, fumigants, and chemical intermediates in industrial processes and now are common groundwater contaminants. With potential adverse health effects including increased ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you