Chlorinated Solvent Contaminant (Chlorinated Compound Remediation) Equipment
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT LT is a seamless, spray applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT® LT is installed under slab and on below grade vertical walls as a vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT® LT spray-application directly to penetrations, footings, grade beams, ...
-
PremiumManufactured by CETCObased in USA
For high-risk underslab and below-grade vertical walls, LIQUID BOOT® PLUS combines traditional Liquid Boot® spray-applied membrane with high-performance VI-20™, a 20-mil polyethylene-EVOH copolymer membrane, to form a superior vapor intrusion barrier that’s ideal for VOCs including BTEX and chlorinated solvents. Even ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
-
Manufactured by RNAS Remediation Productsbased in USA
A Balance of Fast and Slow Release Electron Donors. Newman Zone is Proven: Newman Zone was the first EVO bioremediation product on the market and tens of millions of pounds have been successfully used around the world. Newman Zone is a blend of fast and slow release electron donors proven effective in treating chlorinated solvents and ...
-
Manufactured by Evonik Active Oxygens (fka PeroxyChem)based in USA
Klozur persulfate is the oxidant of choice for in situ chemical oxidation (ISCO), because of its ability to treat a wide range of contaminants including chlorinated solvents, petroleum and PAHs. When properly activated, Klozur persulfate provides an unmatched combination of oxidative power and control that can be delivered both safely and ...
-
Manufactured by Terra Systems, Inc. (TSI)based in USA
Terra Systems TSI DC Family of Bioaugmentation Cultures for In-Situ Bioremediation. Dehalococcoides mccartyi is primarily responsible for the complete dechlorination of PCE and TCE to ethene under anaerobic conditions. At sites where Dehalococcoides microorganisms are not present or are found at low numbers, the process will often “stall” at cis-1,2-dichloroethene. Terra Systems ...
-
Manufactured by Land Science- a division of REGENESIS, Incbased in USA
Nitra-Seal incorporates a nitrile-modified spray applied core and dual polyethylene sheets. The Nitra-Base+ layer (bottom) and the Land Science Bond layer (top) are composed of a polyethylene material bonded to a geo-textile on the out-facing side. Polyethylene is known for chemical resistance, high tensile strength, excellent stress-crack resistance and for highly reliable subsurface ...
-
Manufactured by Evonik Active Oxygens (fka PeroxyChem)based in USA
Klozur CR is a single, formulated product consisting of high-pH activated Klozur Persulfate and PermeOx Plus engineered calcium peroxide, uniting the strengths of both products to treat contaminant source zones and down-gradient plumes. It is formulated to provide a self-activated persulfate oxidation system which couples chemical ...
-
by Euremtechbased in BELGIUM
Patented heating process: Uniform temperatures to 100°C: Electrical heating. Conductive heating. Convective heat ...
-
based in USA
The Cool-Ox® process is a hydrogen peroxide based in-situ chemical oxidation technology designed to address a wide variety of remediation challenges presented by organic contaminants in various types of soils (especially clay) and groundwater. Although other hydrogen peroxide technologies may sound similar, only Cool-Ox® is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you