Only show results in Connecticut? Ok

Drill Cuttings equipment for Soil and Groundwater

  • Premium

    AMS - Direct Push Drilling Technology

    Direct Push Drilling Technology allows for a wide variety of direct push tooling and instrumentation to be advanced into a subsurface lithology using the static weight of the rig, hydraulic down pressure, and rapid hydraulic hammering. Direct Push Tooling is used to perform soil, soil gas, and groundwater sampling. It is also used for soil remediation, and geotechnical sampling and testing. Many ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from PowerProbes - Application and Tooling Product line

  • Premium

    Monster Industrial - Model 3-Hydro & 4-Hydro - In-line Grinder

    Powerful Industrial Inline Grinder For Tough Applications. The powerful 3-HYDRO wastewater grinder & 4-HYDRO In-line grinder are installed into industrial process pipelines to reduce the size of damaging solids in sludge, slurries and waste materials. An inline grinder like these can provide complete protection for downstream equipment – including pumps, valves, centrifuges and heat ...

    By JWC Environmental based in Santa Ana, CALIFORNIA (USA). from Industrial Grinders Product line

  • Premium

    Model HLT - Hydrocarbon Liberation Technology

    Our patented mechanical process works on oil and gas drill cuttings, as well as contaminated soils from spills, to reduce Diesel Range Organic (DRO) content enough to satisfy state and federal agencies' requirements for on-site burial. It reduces the DRO/GRO levels significantly on its own, but by combining it with surfactants the results are ...

    By Signet Aggregates, LLC based in Casper, WYOMING (USA).

  • Premium

    Monster Industrial - Model 3-Hydro, 4-Hydro - Open-Channel Grinder

    Protect Solids Handling Pump With The World’s Leading Grinder. Solids Handling Pumps may not be able to handle large debris.  You can protect your solids handling pump and any other downstream equipment by installing a Monster Industrial HYDRO grinder.  The 3-HYDRO and 4-HYDRO Open-channel grinders can handle much larger debris than your solids handling pumps.  Stop pump ...

    By JWC Environmental based in Santa Ana, CALIFORNIA (USA). from Industrial Grinders Product line

  • Premium

    econ VacuDry - Mercury Waste Treatment Units

    econ industries is the only company worldwide which operates a complete mercury waste recovery and treatment centre; suitable for processing all types of mercury waste on an industrial scale. The econ industries mercury waste centre combines only the safest and most environmentally friendly technologies available. Utilising our equipment and technical knowledge, we are able to safely ...

    By econ industries services GmbH based in Starnberg, GERMANY. from VacuDry Vacuum Thermal Desorption Technology Product line

  • Premium

    econ VacuDry - Waste Treatment Mobile Solutions Unit

    With the new VacuDry0 1,500 and VacuDry® 12,000 series, the innovative VacuDry® technology is now available as fully mobile unit. This incredibly flexible design still offers all of the advantages that our customers have come to expect, many of which lead the market in the field of industrial waste treatment. The mobile plants consist of completely pre-assembled, containerized and ...

    By econ industries services GmbH based in Starnberg, GERMANY. from VacuDry Vacuum Thermal Desorption Technology Product line

  • Premium

    econ VacuDry zerofuel - Energy-efficient Solution for Drill Cuttings Treatment, Contaminated Soil Treatment & Oil Sludge Treatment

    During drilling operations huge amounts of oil sludge, drill cuttings and oil contaminated soils are produced. Often these wastes are stored near the drilling rig for many years and finally have to be treated and/or disposed of professionally. The latest development at econ industries is an environmentally friendly, energy self-sufficient and very cost-effective technology for the treatment of ...

    By econ industries services GmbH based in Starnberg, GERMANY. from VacuDry Vacuum Thermal Desorption Technology Product line

  • Premium

    Cutting & Tapping Fluid Spray - 12 Cans/Case

    This thick clinging aerosol lubricant enhances the production capabilities of cutting a drilling bits and prevents friction damage. This product was designed to withstand rigorous operating conditions and extreme pressure to make cutting and drilling bits perform better at lower operating temperatures. It adheres to blades and bits with no fly off and the thick foam collects debris and ...

    By Interstate Products Inc/ Interstate Products based in Sarasota, FLORIDA (USA). from Aerosols - Automotive & Fleet Product line

  • Premium

    Sunmoy - Model RCD500 - Reverse Circulation Water Drilling Machine

    RCD500 Hydraulic Reverse circulation drilling rig is suitful for pebble layer and Sand. It could suck out 40mm (max diameter) pebble. Reverse circulation drilling is really a form of excavating. The equipment cleans out a hole in the ground as it rotates. The drill cuttings are sucked up into the machine similar to dust being sucked into a vacuum cleaner.it is through this method that ...

    By Sunmoy Technology Co., Ltd. based in Yueqing, CHINA. from Motor-Driven Drilling Rig Product line

  • Premium

    InfraCal 2 - Model TRANS-SP - Oil In Water/Soil Analyzer

    The InfraCal 2 TRANS-SP  is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels using the traditional EPA methods 413.2 and 418.1 or 

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Other Fluid Analyzers Product line

  • AXIOME - Abrasive Waterjet Cutting

    The principle of  abrasive waterjet cutting consists in spraying abrasive at a very high speed on the material to be cut. The water is compressed at 2000 to 4000 bars in order to propel the abrasive which will cut the most hard ...

    By AXIOME based in Aizenay, FRANCE. from Machines Product line

  • CastoTIG 45303 W

    Highly alloyed TIG filler rod for anti-wear protective coating and rebuilding of parts such as hot cutting blades, shears, deburring dies, drills, stamping dies and wear parts such as clutch forks, cams, grippers, and ...

    By Castolin Eutectic based in St-Sulpice, SWITZERLAND. from Welding Consumables - CastoTig Product line

  • Air - Synthetic and Compressed Air Cylinder

    Delivering a wide range of synthetic and compressed air cylinder options to meet your varied needs. As a source of oxygen, air is essential for combustion, respiration, decay and various industrial processes – including oxidation. Some of these applications call for extremely high levels of purity. As regular ambient air contains a number of impurities, synthetic air is the ...

    By Linde Gas AG based in Munich, GERMANY. from Atmospheric Gases Product line

  • Horizontal Direction Drilling (HDD) bits

    Sandvik HDD roller-cone rock bits and reamers are specifically designed to meet the rigorous demands of horizontal directional drilling. The cutting structures and bearing designs lower torque requirements, resulting in higher penetration rates and longer operating hours. Sandvik HDD products enable contractors to drill and ream more and longer crossings in a single pass without the need to trip ...

    By Sandvik Mining and Construction B.V based in Amsterdam, NETHERLANDS. from Rotary Drilling Tools Product line

  • Marsh Funnel

    Viscosity is a measurement of a fluids resistance to flow: the greater the resistance, the higher the viscosity. As measured by the Marsh Funnel, the viscosity of the fluid in question is influence by the density of the fluid (solids content) and gelation rate (beneficiated solids content). The viscosity of the drilling fluid in use should be based on a combination of the following parameters: ...

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Testing Equipment Product line

  • AIR FOAM - Foaming Agent

    AIR FOAM is a foaming agent for use in mineral exploration, HDD, water well, foundation, and seismic drilling operations. AIR FOAM is biodegradable, aids in drilling of unstable zones, easily carries cuttings to the surface, reduces bit balling and packing, and eliminates dusting during air drilling ...

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Civil Engineering - Caisson/Foundation Product line

  • Access Point

    The AccessPoint offers a secure point of entry into DN70, DN100 and DN150 plastic, ductile and cast iron pipes. It is designed for entry into drainage systems where no manhole exists, or there is no other means of ...

    By Flexseal Couplings Ltd (Fernco Group) based in Wombwell, UNITED KINGDOM.

  • CEMENTGEL - Non-Polymer Treated Bentonite

    CEMENTGEL is used in well cementing, slurry walls and other applications where non-polymer treated bentonite is required. CEMENTGEL is used in cementing formulations, slurry cut-off walls, drilling, boring, grouting or industrial applications where all-natural bentonite is ...

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Civil Engineering - Caisson/Foundation Product line

  • Cleaning Straps

    Manufactured from anti-static materials, the strap prepares surfaces prior to cutting and drilling. Standard cleaning strap for up to 12” Pipe, with longer models available for larger diameters. Unique circular blades cut in every direction, allowing free movement of the strap. Circular cleaning teeth clean in all directions. User-friendly handles incorporate a shortening ...

    By Pipeline Technology Limited based in Fareham, UNITED KINGDOM. from General Pipe Tools Product line

  • Clay Cutter - Model Pro - Dry Clay Inhibitor

    CLAY CUTTER PRO is a dry version of the CLAY CUTTER liquid additive. This concentrated, non-hazardous, proprietary clay inhibitor can be used with either polymer or bentonite drilling fluid systems. This dry additive is cost effective and dosages are easily monitored and controlled. CLAY CUTTER PRO is an ideal additive for HDD bores in reactive clay ...

    By CETCO based in Kings Norton, UNITED KINGDOM. from Drilling Products - Polymers & Additives Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you