drill cuttings removal (Drill Cuttings) equipment available in Slovakia

  • Cuttings Treatment Technology

    Drill cuttings are the broken bits of solid material removed from a borehole drilled. Boreholes drilled in this way include oil or gas wells, water wells, and holes drilled for geotechnical investigations or mineral exploration. Drill cuttings are produced as the rock is broken by the drill bit advancing through the rock or soil; the cuttings are ...

    By SoilTech AS based in Tananger, NORWAY.

  • GN Solids - Model GN - Drill Cuttings Management Modular Unit

    GN Solids Control is a leading design and manufacturing company providing turnkey solutions for drill cuttings management systems for global clients. To meet the demands for fast removal and quick assembly within a cost effective budget, the GN engineers have redesigned the solids control and drilling waste management systems into modular units..

    By GN Solids Control UK based in Kent, UNITED KINGDOM. from Drilling Waste Treatment Product line

  • kosun - Model Shale Shaker - Shale Shaker

    The shale shaker is the first stage of solids control equipment in drilling purification system. It can remove cuttings above 75μm brought from the drilling well to leave the liquid with smaller particles into the tanks below, which will flow into next grade solids control equipment to be treated.Shale ShakerThe Economy of Linear MotionKOSUN ...

  • Sand Cone

    Cuttings or solids held in suspension in drilling mud significantly influence the life of pumps, swivels, and hoses. These abrasive particles can be removed by using a sand cone (desander) working in conjunction with good drilling mud characteristics. Mud mixed to a Marsh Funnel viscosity of 34 to 36 seconds can carry cuttings from the hole.

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Testing Equipment Product line

  • Chemco - Model Chemdrill MUD - High Molecular Weight Environmental Polymer

    Chemdrill MUD is a very high molecular weight environmental polymer which dissolves quickly in fresh or salt water to form a very high viscosity drilling mud. It is designed to encapsulate and remove the cuttings quickly, lubricate the drilling rod, reduce torque and stabilize the casing. For the following applications : horizontal and vertical ...

    By Chemco, Inc. based in Saint-Augustin-de-Desmaures, QUEBEC (CANADA). from Drilling Products Product line

  • Chemco - Model Chemdrill MUD 500 - Organic and Synthetic Polymers

    Chemdrill MUD 500 is an organic and synthetic polymers formula. It is designed to form a high performance drilling mud that will aid in stabilizing brittle and fragile formations such as overburden, sand and gravel. Mixed with Chemdrill LUBE, it becomes an 'all-in-one' advantageous alternative to mixtures of drilling mud and bentonite. It ...

    By Chemco, Inc. based in Saint-Augustin-de-Desmaures, QUEBEC (CANADA). from Drilling Products Product line

  • Dry Acid

    Use DRY ACID to: Remove clays, shales, drilled “cuttings” and commercial drilling muds from water wells. Excellent for “gravel-slipping” and freeing stuck drill pipe. Develop new wells to their maximum specific capacity by breaking down mud-cake produced during drilling. Redevelop old wells producing in sand and gravel ...

    By Cotey Chemical Corporation based in Lubbock, TEXAS (USA). from Chemicals Product line

  • IBG HydroTech - Model TriStar - All-Rounders - Cleaning Nozzle

    The Chisel Point Nozzle TriStar was designed to remove blockages and full pipe obstructions like roots and other deposits. An economical application is guaranteed using the combination of the forward-facing jets with the pointed drill and sharp cutting edges.

    By IBG HydroTech GmbH based in Büdingen, GERMANY. from All-Rounders - Cleaning Nozzle Technology Product line

  • Pure-Bore - Dry Free Flowing Polymer

    Pure-Bore is a dry free flowing polymer that mixed with water produces a natural biodegradable drilling fluid, which can be used in a variety of drilling applications. Pure-Bore provides exceptional bore hole stability and cuttings removal in a wide range of ground conditions.

    By Pancera Tubi e Filtri Srl based in San Benedetto, ITALY. from Drilling Equipment Product line

  • N&N - Core Bits & Accessories

    Core bits are engineered with water ways that allow easy removal of cutting debris. The center hole of the Core bit removes sediment rock and allows the core pedestal to pass through the bit and into the core barrel. N&N Drilling Supply Diamond Core Bits are designed for superior cutting performance and longevity. We also offer a large ...

    By N&N Drilling Supply Mfr. based in Jessup, PENNSYLVANIA (USA).

  • Marsh Funnel & Cup - Viscosity Measurement Tool

    Viscosity is a measurement of a fluids resistance to flow: the greater the resistance, the higher the viscosity. As measured by the MARSH FUNNEL, the viscosity of the fluid in question is influenced by the density of the fluid (solids content) and gelation rate (beneficiated solids content). The viscosity of the drilling fluid in use should be ...

    By CETCO based in Wallasey, UNITED KINGDOM. from Drilling Products - Testing Equipment Product line

  • Marsh Funnel

    Viscosity is a measurement of a fluids resistance to flow: the greater the resistance, the higher the viscosity. As measured by the Marsh Funnel, the viscosity of the fluid in question is influence by the density of the fluid (solids content) and gelation rate (beneficiated solids content). The viscosity of the drilling fluid in use should be ...

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Testing Equipment Product line

  • Cristanini - Model WJ.FE 300 - Fire Fighting Systems

    WJFE 300 MODULAR is a revolutionary system for drilling  and fire first attack in enclosed spaces. It uses a patented lance with specific system of abrasive and water mixing, placed on the lance itself, which is the result of the most intelligent and sophisticated engineering. WJFE 300 MODULAR is an efficient instrument for drilling/cutting ...

    By Cristanini S.p.A. based in Rivoli Veronese, ITALY. from Fire Fighting Systems Product line

  • Oil Drill Bit

    China began to introduce PDC bits since the early 1980s. After the 1990s, major oil fields began to use PDC bits and achieved good results. Although PDC bits have many advantages and are widely used, the hydraulic problems of PDC bits are even more pronounced than other bits: On the one hand, PDC bits break the rock in a shear manner, and the ...

    By Henan Wanke Diamond Tools Co.,Ltd based in Zhengzhou, CHINA. from PDC Cutter Product line

  • Geoprobe - Model LB - Large Bore Soil Sampling Systems

    The LB Sampler is a solid barrel, piston-sealed, direct push device for collecting discrete interval samples of unconsolidated materials at depth. The sampler is approximately 30 in. (762 mm) long and has a 1.5 in. (38 mm) OD. The LB Sampler is capable of recovering a discrete sample core 22 in. long x 1.0 in. diameter (559 mm x 25 mm) contained ...

    By Geoprobe Systems -Kejr, Inc. based in Salina, KANSAS (USA). from Soil Sampling- Single Rod Product line

  • RET - On-Site Soil Remediation System

    The RET Soil Remediation System removes hydrocarbons from the effected soil area, recovers those hydrocarbons for forward uses, and returns the cleaned soil back to the original site. The complete process can take place on-site. Systems can be of static or mobile construction and can easily be scaled up or down. Applications for this system range ...

    By Recovered Earth Technologies, LLC based in McCarran, NEVADA (USA). from Hydrocarbon Systems Product line

  • GUIBERSON - Hydraulic Wireline Oil Savers

    GUIBERSON hydraulic oil savers strip fluids from the wireline, cut costs by saving valuable oil, and promote safety by minimizing danger of explosion or fire at the well site. Hydraulic Oil Savers are available in several types to meet every stripping requirement. GUIBERSON hydraulic oil savers use a special oil, gas, and abrasion resistant, one ...

    By Cameron based in Houston, TEXAS (USA). from Drilling Systems Product line

  • GN - Vertical Cuttings Dryer Telescopic Skid

    GN vertical cuttings dryer telescopic skid is a platform for the operation of cuttings dryers. The platform can lower down while transportation and lift up while operation. The height of the total unit without removing the dryer is within the limit of the road transportation. The cantilever crane on the platform is optional for client requirement, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you