We couldn't find any drilling fluids applications suppliers or service providers located in Australasia
Here is a list of applications results with suppliers serving Australasia
Drilling Fluids Applications available in Australasia
-
Premium
Building & construction technology solutions for drilling industry
The leading supplier of drilling products in North America. Our complete line of professional products are specially designed to enhance the cost-effectiveness of drilling operations by controlling and improving drilling fluid properties. Each and every drilling product is supported by our experienced team of field engineers and research ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Ceramic membranes and pressure vessels for environmental protection / waste water technology
In waste water treatment systems our membranes are used with great success for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers. ...
By atech innovations gmbh based in Gladbeck, GERMANY.
-
Fluid temperature control and separation solutions for onshore applications
Delivery assured from start to finish. From onshore drilling to refineries, we support clients with their fluid management challenges from mud temperature controls systems to fluid separation, cooking oils to crude oils. By evaluating, planning and implementing solutions designed at every stage to enhance drilling fluid performance and improve operating efficiencies, we have been successfully supporting clients globally for more than 18 years. Our experience goes beyond drilling, having carried out slop oil, ...
By Osso Ltd based in Aberdeen, UNITED KINGDOM.
-
Fluid temperature control and separation solutions for offshore applications
Delivery assured from start to finish. No matter if you are undertaking an HP/HT drilling campaign, decommissioning an asset, or maintaining control of waste fluids, offshore demands the highest standard of equipment and service for safe and efficient operations. Whether it be long- or short-term equipment rental or capital expenditure, our flexible and tailored approach means we will design an offering that ultimately best suites your needs. Our extensive fleet of decanter centrifuges, disc stack separators, ...
By Osso Ltd based in Aberdeen, UNITED KINGDOM.
-
Decanter centrifuge for drilling mud solids control
Decanter centrifuge is used as the 4th phase solids control equipment after shaker, desander and desilter. The centrifuge suck the mud from the compartment receiving the discharge from the desilters and mud cleaners, and the returned stream is directed to the next compartment downstream. The use of decanter centrifuge with the drilling mud is (1) removal fine solids from unweighted fluids (2) selection separation of colloidal and ultra-fine solids from weighted fluids to improve their ...
By GN Decanter Centrifuge Ltd based in Hebei, CHINA.
-
Decanter centrifuge for mining & diamond drilling
GNLW223 Series Mini Centrifuge is specially designed for small capacity, small footprint, and fine solids separation. It is designed to meet the drilling fluids recycling for mining drilling rigs especially for diamond drilling. The diamond drilling contract can choose to buy single centrifuge unit with electric drive fixed speed or VFD drive variable speed or even the Fully Hydraulic Drive. For the FHD drive Centrifuge, it can use the diesel engine to power the hydraulic pump to feed to the centrifuge without any ...
By GN Decanter Centrifuge Ltd based in Hebei, CHINA.
-
Additives for drilling fluid industry
Technical Clay & Natural Solutions for drilling fluid ...
By Geohellas S.A. based in Athens, GREECE.
-
Laser micromachining systems for polymer drilling, cutting and selective ablation sector
Polymers are widely used in diverse fields of everyday life starting from household goods to delicate bio-medical devices and MEMS. Molding and extrusion are common processes for manufacturing parts from polymers. Microparts are produced by different etching techniques. Lithography requires use of masks and is acceptable for mass production. Excimer lasers are usually used for processing polymers. Their usage is also related to the mask technique. Because of specific features of the excimer lasers there is an ...
By AKONEER based in Vilnius, LITHUANIA.
-
Decanter centrifuge & cuttings for drilling waste management & disposal
Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud ...
By GN Decanter Centrifuge Ltd based in Hebei, CHINA.
-
Separation solutions for constructions industry
Today's construction industry focuses a great deal on underground drilling and support systems. These processes typically use drilling fluid or slurry techniques. Packaged mud recycling systems are designed to minimize solids waste for disposal and effectively clean drilling fluid and slurry for active reuse. Foundation Drillers utilize drilling fluids for stability of holes during operation. Mud reclaimers process the used drilling fluid for continuous use downhole and creates less solids ...
By Elgin Separation Solutions based in Stafford, TEXAS (USA).
-
Vertical Cuttings Dryers for Waste Solids Management
In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite recovery” system. As noted in that report, when centrifuges are properly used, centrifuges enhance the drilling fluid properties, thereby improving rig performance. By maintaining the target properties of the drilling fluid, ...
By Elgin Separation Solutions based in Stafford, TEXAS (USA).
-
Hazardous waste treatment solutions for oil and gas industry
There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Chemical solutions for oil & gas industry
HIMOLOC Technology offers service companies, operators and refiners multiple opportunities to improve their production and ...
By Derypol, S.A. based in Barcelona, SPAIN.
-
Sitelab Hydrocarbon Fingerprinting & Forensic Analysis using UVF-Trilogy
Sitelab's UVF-Trilogy analyzer, model no. 7200-004-FNGP, is used to fingerprint and identify the age or type of contamination on your site at a fraction of the cost compared to conventional laboratory forensic analysis. The equipment is easy to use and samples take just a few minutes to analyze. Test samples for GRO, EDRO, PAHs and TPH-Oil using the four UV modules included with the instrument. ...
By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).
-
Separation solutions for oil & gas industry
Elgin Separation Solutions complete line of liquid / solid separation and dewatering equipment is fully compliant with all requirements for the oil & gas industry. Utilizing our closed loop technology project sites will be able to reclaim clean water and recovered drilling fluid that is cost effective and environmentally safe. Featuring shale shakers, decanter centrifuges, vertical cuttings dryers and dewatering ...
By Elgin Separation Solutions based in Stafford, TEXAS (USA).
-
Drill Cuttings Plants For Oil and Gas Industry
Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Sitelab UVF-Trilogy Analyzer for Extended Diesel Range Organic Hydrocarbons
Sitelab's UVF-Trilogy analyzer, model no. 7200-004-EDRO, includes EDRO UV module used to detect hydrocarbons in the C10 to C36 diesel and oil range. This is our most popular model. The analyzer is factory calibrated using Sitelab's EDRO calibration kits for testing soil or water. This test matches well to U.S. EPA Method 8015M and many other TPH methods using GC-FID ...
By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).
-
Separation solutions for HDD / trenchless industry
The HDD, trenchless and underground construction industry has realized the benefits and economics of recycling drilling fluid and slurry. With increased transportation costs and more stringent environmental enforcements and overall cost containment, the need for recycling is evident in all countries and across the range of trenchless applications. From maxi and mini HDD rigs to microtunneling and pipe jacking, packaged mud recycling units and mud reclaimers are an invaluable asset. The below diagram represents a ...
By Elgin Separation Solutions based in Stafford, TEXAS (USA).
-
Solids Control Centrifuges for Drilling Fluid Dewatering
Saving Money, Time, and the Environment Through Chemistry A General Process Philosophy Description of Elgin’s Drilling Fluid Dewatering Systems. The drilling industry is regulated by a myriad of environmental regulations that protect our air, water, and land resources. As these regulations continue to evolve, so too must the technologies utilized by the drilling industry. Though lowering compliance costs is always a worthy initiative, incorporating technology that also enhances the drilling process by ...
By Elgin Separation Solutions based in Stafford, TEXAS (USA).
-
Membrane Water Treatment and Monitoring Products for Oil & Gas
Innovative solutions that improve corrosion prevention and drilling fluid management. Microbiologically Induced Corrosion (MIC) costs the oil and gas industry billions of dollars each ...
By Modern Water Inc. based in New Castle, DELAWARE (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you