We couldn't find any drilling mud applications suppliers or service providers located in Canada

Here is a list of applications results with suppliers serving Canada

Drilling Mud Applications available in Canada

  • Premium

    Oil Spill Eater II (OSE) for Energy storage and fuel storage leaks

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Eliminating the Environmental foot print for Offshore and On shore oil rigs

    OSE II ELIMINATING THE ENVIRONMENTAL FOOT PRINT WHILE REDUCING COSTS ASSOCIATED WITH DRILLING MUD, DRILLING MUD CLEAN UP, RIG WASHING, RIG OPERATIONS AND EMERGENCY OIL SPILL RESPONSE FROM OIL RIGS

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Industrial matter treatment for the recycling industry

    In Regards to applications in Recycling Area Pieralisi provides efficient solutions to treatment processes for Drilling Mud, Treatment and recycling of Industrial Fluids, recycling of Polymers and their respective recyclables, Recycling of services water in industrial processes and many other applications.

    By Pieralisi Group based in Jesi, ITALY.

  • Decanter centrifuge for mining & diamond drilling

    GNLW223 Series Mini Centrifuge is specially designed for small capacity, small footprint, and fine solids separation. It is designed to meet the drilling fluids recycling for mining drilling rigs especially for diamond drilling. The diamond drilling contract can choose to buy single centrifuge unit with electric drive fixed speed or VFD drive variable speed or even the Fully Hydraulic Drive. For the FHD drive Centrifuge, it can use the diesel engine to power the hydraulic pump to feed to the centrifuge without...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Separation solutions for dredging industry

    Dredging is the process of removing organic and/or inorganic sediment from the bottom of shallow water bodies in order to economically dispose of those sediments and/or have them repurposed for land farming or construction purposes. Elgin Separation Solutions manufactures effective solid recycling systems capable of handling high flow capacity. Elgin`s linear motion shakers have the largest screening surface area on the market. In addition, we have complete desilter and desander hydrocyclone manifolds incorporat...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Hydrocyclones for automotive applications

    Krebs cyclones are used in automotive and large vehicle plants. Krebs cyclones improve the cleaning process prior to painting by separating the paint weld balls, metallic particles, oils, grease and phosphate sludge from the cleaning solution.

    By FLSmidth KREBS based in Tucson, ARIZONA (USA).

  • Cyclones for oil & industrial refinery applications

    Krebs Hydrocyclones & Vessels, millMAX Centrifugal Slurry Pumps and Technequip Valves for the Industrial and Refinery Application.

    By FLSmidth KREBS based in Tucson, ARIZONA (USA).

  • Pulsair`s industrial drilling mud agitators for oil & gas industry

    Industrial drilling mud agitators and mixing equipment for oil & gas exploration. Pulsair Systems supplies oil & gas operators with industrial drilling mud mixer agitators for mud tank mixing. The Pulsair mixing process quickly allows drillers and operators to ensure homogenous mud consistency for their drilling mud needs.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Industry

    Dragflow is a world leader in slurry pumping solutions. Dragflow pumps can handle all slurry from dirty water to the very heavy slurries with solid concentration up to 70% by weigh. Thanks to its twenty five and more years of experience in the most difficult pumping application Dragflow is able to satisfy the most demanding customer in the industrial and construction market.

    By Dragflow S.r.l. based in Villafranca, ITALY.

  • Cavity pump for mining industry

    The demanding mining industry requires a lot from its progressing cavity pumps. A large range of media needs to be pumped with a variety of viscosity levels that can be highly abrasive. Media pumped include mineral slurries, thickened sludges, waste water, and drilling muds.  Moyno progressing cavity pumps meet the demands of the mining industry.

    By Moyno, Inc. based in Springfield, OHIO (USA).

  • Separation solutions for oil & gas industry

    Elgin Separation Solutions complete line of liquid / solid separation and dewatering equipment is fully compliant with all requirements for the oil & gas industry. Utilizing our closed loop technology project sites will be able to reclaim clean water and recovered drilling fluid that is cost effective and environmentally safe. Featuring shale shakers, decanter centrifuges, vertical cuttings dryers and dewatering systems.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Separation solutions for constructions industry

    Today`s construction industry focuses a great deal on underground drilling and support systems. These processes typically use drilling fluid or slurry techniques. Packaged mud recycling systems are designed to minimize solids waste for disposal and effectively clean drilling fluid and slurry for active reuse.  Foundation Drillers utilize drilling fluids for stability of holes during operation. Mud reclaimers process the used drilling fluid for continuous use downhole and creates less solids waste.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Hydrocyclones for chemical plants applications

    FLSmidth Krebs hydrocyclones, including Krebs gMAX hydrocyclones, are simple, yet highly effective equipment for removing and / or concentrating solids in chemical processes.

    By FLSmidth KREBS based in Tucson, ARIZONA (USA).

  • Decanter centrifuge for drilling mud solids control

    Decanter centrifuge is used as the 4th phase solids control equipment after shaker, desander and desilter. The centrifuge suck the mud from the compartment receiving the discharge from the desilters and mud cleaners, and the returned stream is directed to the next compartment downstream. The use of decanter centrifuge with the drilling mud is (1) removal fine solids from unweighted fluids (2) selection separation of colloidal and ultra-fine solids from weighted fluids to improve their...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Separation solutions for HDD / trenchless industry

    The HDD, trenchless and underground construction industry has realized the benefits and economics of recycling drilling fluid and slurry. With increased transportation costs and more stringent environmental enforcements and overall cost containment, the need for recycling is evident in all countries and across the range of trenchless applications. From maxi and mini HDD rigs to microtunneling and pipe jacking, packaged mud recycling units and mud reclaimers are an invaluable asset. The below diagram represents...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Absolute separation for the recycling sector

    In the whole production waste, a great part is represented by those of industrial origin. As far as the correct handling of them, VITONE ECO offers complete solutions, as far as dehydration of drilling muds, recycling of water in different processes in chemical, pharmaceutical and biotechnological sectors and in the processes of ore-mining and production of metals.

    By Vitone Eco S.r.l. based in Bitonto, ITALY.

  • Drill pipe cleaning

    Problem: When scale and hardened mud build up in oil well drill pipe, plugged drill heads are the usual result. This reduces efficiency and increases downtime. Traditional rattle-and-brush systems can leave some build-up behind and require a rinse operation to flush debris and drilling fluids.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you