Drilling Regulations Equipment For Soil And Groundwater Available In France
-
PremiumManufactured by AMS, Inc.based in USA
The PowerProbe 9400 Series is our mid-sized PowerProbe. The track-mounted 9410 VTR is compact for limited access areas being 56 inches wide, but maintains great augering (3,000 ft-lb) and direct push drilling (200 ft-lb) power. Fully loaded with all options (winch, SPT Hammer, Direct Push Hammer, and Auger Motor), it has a surface load of only 5.6 psi, which allows you many options in a small ...
-
PremiumManufactured by CETCObased in USA
PUREGOLD CLEANDRILL is a bentonite free powder designed for special conditions associated with drilling horizontal directional recovery wells for groundwater remediation. PUREGOLD CLEANDRILL controls and helps maintain formation permeability and ...
-
PremiumManufactured by CETCObased in USA
CIVIL PRO 125 is a high yielding, easy mixing, 200-mesh bentonite drilling fluid made from the highest grade Wyoming sodium bentonite. CIVIL PRO 125 meets and exceeds the requirements of EN ...
-
PremiumManufactured by CETCObased in USA
CETCO X-TORQUE is a 100% environmentally safe, non-petroleum lubricant specifically developed for horizontal directional drilling and mineral exploration, as well as other drilling applications. CETCO X-TORQUE attracts to metal surfaces such as drill pipe and downhole tooling to provide lubrication between these surfaces and the formation. CETCO X-TORQUE will dramatically reduce clay balling as ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct Push Drilling Technology allows for a wide variety of direct push tooling and instrumentation to be advanced into a subsurface lithology using the static weight of the rig, hydraulic down pressure, and rapid hydraulic hammering. Direct Push Tooling is used to perform soil, soil gas, and groundwater sampling. It is also used for soil remediation, and geotechnical sampling and testing. Many ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS PowerProbe 9110-LAP is a portable direct push rig, designed for use in confined spaces or buildings where a vehicle-mounted probe cannot go. This model can be driven off any standard AMS PowerProbeª with an auxiliary hydraulic hook-up kit, or the optional AMS portable hydraulic power unit. The 9110-LAP comes standard with a 90 ft-lb hydraulic ...
-
Manufactured by Xi`an Huayang Oil & Gas Equipment Co., Ltd.based in CHINA
Mud tanks, also known as mixing tanks and slurry tanks in the solid-control equipment industry. Mud tanks are mainly used in oil drilling, directional crossing, gas layer exploration, sewage treatment and other industries. They are necessary equipment for mud processing equipment and mud circulation system to store drilling mud. According to different design standards, it can be divided into: ...
-
Manufactured by Sumo UK Ltdbased in UNITED KINGDOM
The essential tool for zero-till crop establishment where seed placement is required with minimal soil ...
-
Manufactured by Wyo-Ben, Inc.based in USA
FLOWMASTER LV is a unique low viscosity, highly concentrated proprietary dry polymer designed for use in vertical and horizontal directional drilling operations. FLOWMASTER LV conditions drilling fluids to control fluid loss, prevent formation clays from swelling, and will keep tools clean by preventing bit balling with minimal viscosity increase. FLOWMASTER LV also aids in the effective ...
-
Manufactured by Beijing Pankow Technology Co., Ltd.based in CHINA
P-700L drill is a new type core drilling machine. It can meet the new multi-drill techniques and suit for multi- vocations, especially for the diamond drilling. It can be used in engineering geology exploration, hydrology, well, and big caliber construction It’s a spindle type drill. It has inherited many merits from the former type, such as simple structure, easy operation, and convenient ...
-
Manufactured by Mincon Group PLCbased in IRELAND
The Mincon HDD70PR pull-reamer hammer uses our proven technology to define the benchmark for HDD tools. Thanks to its patented, reverse-airflow hammer cycle, it can reliably be used to ream pilot bores between 89mm (3½”) and 108mm (5¼”), to a full hole size of 229mm (9"). Mincon's design means that minimal feed and rotational force are required from the drilling machine, ...
-
based in USA
Maximize power output for optimal bit performance. We leverage 30 years of drilling experience to combine the right torque, speed, and flow capabilities in our positive-displacement mud motors. These motors maximize downhole power output, which enables optimal bit performance and precise well ...
-
Manufactured by MARL Technologies Inc.based in CANADA
The Fraste FS 250 is a compact, strong and modular-construction unit and a wide range of drilling accessories are available to get a custom-built solution for a large variety of drilling jobs. Direct and reverse fluid circulation system with easy switching system. Air drilling with DTH hammer operated by a separated air compressor.Available on tracks or mounted on a North American ...
-
Manufactured by Vermeerbased in USA
Introducing a new direction in horizontal directional drilling (HDD) — the D24x40 S3 carries on a proud legacy of reliability. The D24x40 set the industry standard in 1993, and in 2015, there are even more reasons it’s the trusted choice to meet contractors’ right-size, right-power needs. With 28,000 lb (124.6 kN) of thrust and pullback and 4200 ft-lb (5694.4 Nm) of rotational ...
-
Manufactured by Roddie Inc.based in USA
The 2022 Pit Shot® model X4 is designed for utility service work, where surface launch drill cannot go. Capable of installing 1″ to 6″ ...
-
Manufactured by Mempex Ltdbased in BELARUS
A lightweight & portable hydraulic underground piercing unit. UNB-20 has a full steering capability thanks to radiolocation navigation system. UNB-20 is a multifunctional unit designed for drilling in areas with limited accessibility and in confined urban spaces. The works are accomplished in two steps: 1) drilling a pilot bore with directional guidance, 2) pulling a reamer and expanding the ...
-
Manufactured by Dura-Line Corp - part of Orbiabased in USA
Dura-Line Smooth Outside Wall HDPE Conduit with internal longitudinal ribs is made to Industry Standards for Power and Communications Applications. It can be installed using open trench methods, HDD (Horizontal Directional Drilled) Plowed, or pulled into conduit. There are also versions available for aerial applications. With optional Silicore Permanently Lubricated Lining, inside ribbed duct can ...
-
Manufactured by Infinity Tool Manufacturingbased in USA
Shark PDC Reamers are available in size from 14″ to 48″ and solid body Reamers from 5-1/2″ to ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The Deviation Probe DevProbe1 is used to measure the borehole deviation. A three-axis magnetometer measures the azimuthal direction of the borehole and a dual tilt sensor provides information about the inclination. The probe is sealed and temperature compensated. Borehole deviation is required to determine the precise XYZ location of a seismic source or geophone inside a borehole. A software is ...
-
based in COLOMBIA
Pipe Ramming is a widely used trenchless methodology for the installation of carbon steel pipe or sacrificial casing. This methodology can also be used to assist the Horizontal Directional Drilling (HDD) technique. Official representatives for Latin America and the US of the European brand Hercu Pneumatic, which has more than 20 years experience in the manufacture of this equipment, with high ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you