Drilling Regulations Equipment For Soil And Groundwater Available In Lithuania
-
PremiumManufactured by CETCObased in USA
CIVIL PRO 125 is a high yielding, easy mixing, 200-mesh bentonite drilling fluid made from the highest grade Wyoming sodium bentonite. CIVIL PRO 125 meets and exceeds the requirements of EN ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct Push Drilling Technology allows for a wide variety of direct push tooling and instrumentation to be advanced into a subsurface lithology using the static weight of the rig, hydraulic down pressure, and rapid hydraulic hammering. Direct Push Tooling is used to perform soil, soil gas, and groundwater sampling. It is also used for soil remediation, and geotechnical sampling and testing. Many ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS PowerProbe 9110-LAP is a portable direct push rig, designed for use in confined spaces or buildings where a vehicle-mounted probe cannot go. This model can be driven off any standard AMS PowerProbeª with an auxiliary hydraulic hook-up kit, or the optional AMS portable hydraulic power unit. The 9110-LAP comes standard with a 90 ft-lb hydraulic ...
-
PremiumManufactured by CETCObased in USA
PUREGOLD CLEANDRILL is a bentonite free powder designed for special conditions associated with drilling horizontal directional recovery wells for groundwater remediation. PUREGOLD CLEANDRILL controls and helps maintain formation permeability and ...
-
PremiumManufactured by CETCObased in USA
CETCO X-TORQUE is a 100% environmentally safe, non-petroleum lubricant specifically developed for horizontal directional drilling and mineral exploration, as well as other drilling applications. CETCO X-TORQUE attracts to metal surfaces such as drill pipe and downhole tooling to provide lubrication between these surfaces and the formation. CETCO X-TORQUE will dramatically reduce clay balling as ...
-
PremiumManufactured by AMS, Inc.based in USA
The PowerProbe 9400 Series is our mid-sized PowerProbe. The track-mounted 9410 VTR is compact for limited access areas being 56 inches wide, but maintains great augering (3,000 ft-lb) and direct push drilling (200 ft-lb) power. Fully loaded with all options (winch, SPT Hammer, Direct Push Hammer, and Auger Motor), it has a surface load of only 5.6 psi, which allows you many options in a small ...
-
Manufactured by FRANK GMBHbased in GERMANY
SurePEX–pipes made of cross-linked polyethylene (PE-Xa) are the safe solution for house connections. SurePEX–pipes are cross-linked via Engel process at more than 2.000 bar pressure directly during the extrusion in the amorphous phase. Due to this homogeneous method of cross-linking, SurePEX-pipes are resistant against stress cracks, whereby the pipes can be installed officially ...
-
Manufactured by Universal HDDbased in USA
Harr Technologies, owned and founded by Bob Harr, has developed a revolutionary method for cleaning and restoring clogged and damaged culverts. It all started a few years ago when Bob Harr noticed county workers open cutting a road to remove a clogged culvert. After further observation around his hometown in Colorado, Bob Harr noticed road washouts and failures due to clogged and damaged ...
-
Manufactured by Sunnen Products Companybased in USA
Gun drilling is the oldest and most widely used method of deep hole drilling employed by industry today. The drill or “gun drill” is generally a one-piece assembly consisting of a hollow cylindrical drill driver. Also, it is brazed to a V-shaped crimped tube and finally assembled to a brazed-on solid carbide drill head. Both the crimped drill shank and the brazed-on carbide drill head ...
-
Manufactured by Dipl.-Ing. Lutz Kurth Bohr- und Brunnenausrüstungen GmbHbased in GERMANY
Transportation length: 3.460 mm. Transportation height: 1.900 mm. Transportation width: 780 mm. Height work position: . 3.760/5.060 mm. Weight: 1.950 kg. Power: 24,5 kW. Info: The bases model this ...
-
Manufactured by Dipl.-Ing. Lutz Kurth Bohr- und Brunnenausrüstungen GmbHbased in GERMANY
Transportation length: 2.855 mm. Transportation height: 1.900 mm. Transportation width: 780 mm. Weight: 1.860 kg. Power: 30 kW. Info: Electric engine for work in closed ...
-
Manufactured by Star Bentonite Exportsbased in INDIA
STARBENT 700 is a natural sodium bentonite that, like the bentonites originating in Wyoming - USA, has a very high colloidal activity and a very stable behaviour in all the suggested uses. STARBENT 700 is specially designed for assuring the best performances in the production of drilling fluids for piles, diaphragm walls, low permeability cut-off walls and it is successfully used in all the ...
-
Manufactured by Sandvik Mining and Construction B.Vbased in NETHERLANDS
Sandvik HDD roller-cone rock bits and reamers are specifically designed to meet the rigorous demands of horizontal directional drilling. The cutting structures and bearing designs lower torque requirements, resulting in higher penetration rates and longer operating hours. Sandvik HDD products enable contractors to drill and ream more and longer crossings in a single pass without the need to trip ...
-
Manufactured by American Augers and Trencor, Inc.based in USA
DD-220T Mid-Size Directional Drills is Full length walkway, Cummins Tier 3 / Tier 4 interchangeable engine, Microprocessor controlled, Optional knuckle-boom crane, Ideal for small to mid-size utility construction as well as mid-range pipeline projects, Optimum jobsite mobility. ...
-
Manufactured by Universal HDDbased in USA
Now with the UNIHammer you can get more distance per hour, per day, on your bores than ever before. It is the premier rock tool on the market today, and best of all, it’s economical. A variety of custom-designed UNIHammer bits fit directly on the end of any directional drilling hammer allowing you to have more aggressive steering though dirt, rock or even ...
-
Distributed by Kabelwerk Eupen AGbased in BELGIUM
EUCARESIST is a PAS1075-certified polyethylene plastic piping system for alternative installation with high resistance to crack (RC). The Kabelwerk Eupen's PE100-RC pipes are ideal for open trench installations without sand bed, ploughing and milling, relining and horizontal directional drilling. These different installation and laying methods are cost effective solutions for pipe system ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Engineered for Horizontal Directional Drilling (HDD) and other trenchless ...
-
Distributed by AMC Germany GmbH - Imdexbased in GERMANY
Directional Drilling, commonly called horizontal directional drilling or HDD, is a steerable trenchless method of installing underground pipes, conduits and cables in a shallow arc along a prescribed bore path by using a surface launched drilling rig, with minimal impact on the surrounding area. Directional boring is used when trenching or excavating is not practical. Directional boring ...
-
Manufactured by Vermeerbased in USA
Performance redefined. The next generation of Vermeer horizontal directional drills is here. To earn the coveted S3 badge, the D9x13 S3 Navigator horizontal directional drill has gone through substantial testing in a variety of ...
-
Manufactured by Pipe Equipment Specialists Ltd. (PESL)based in UNITED KINGDOM
Designed specifically for Directional Drilling to prevent the ingress of drilling fluid in the pipe. Available in the size range 32mm up to 500mm. This Towing Head (Pipe Puller) has been designed specifically for use in Directional Drilling. Providing a cost effective Towing Head which prevents the ingress of drilling fluids into the pipe, whilst being suitable for both SDR 11 and SDR 17.6 pipe ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you