Drilling Regulations Equipment For Soil And Groundwater In Africa
-
Manufactured by Dura-Line Corp - part of Orbiabased in USA
Dura-Line Smooth Outside Wall HDPE Conduit with internal longitudinal ribs is made to Industry Standards for Power and Communications Applications. It can be installed using open trench methods, HDD (Horizontal Directional Drilled) Plowed, or pulled into conduit. There are also versions available for aerial applications. With optional Silicore Permanently Lubricated Lining, inside ribbed duct can ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The Deviation Probe DevProbe1 is used to measure the borehole deviation. A three-axis magnetometer measures the azimuthal direction of the borehole and a dual tilt sensor provides information about the inclination. The probe is sealed and temperature compensated. Borehole deviation is required to determine the precise XYZ location of a seismic source or geophone inside a borehole. A software is ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1000 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust construction does not prejudice its versatility. The rig can ...
-
Manufactured by Dura-Line Corp - part of Orbiabased in USA
Smoothwall HDPE is the most commonly used underground raceway and is typically packaged in continuous lengths on reels or coils allowing for fast installation with minimum joints. Smoothwall can be installed via trenching, plowing and directional drilling. Smoothwall is available in numerous colors and stripe combinations for easy identification. There are numerous wall thicknesses available as ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole hammer drilling and augering. All controls are ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
Drilling rig for water wells, mineral explorations, seismic, coring and deep geothermal applications. Although its moderate dimensions it has high technical characteristics in terms of pull up and torque: for this reason the rig able to reach high depths (around 800 m). It is possible to work by mud pump 7”1/2x8” which vastly improves drilling also in bad terrain conditions. Its ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole hammer drilling and auger drilling. Numerous ...
-
Manufactured by Dura-Line Corp - part of Orbiabased in USA
Dura-Line PinPoint Locatable Conduit is made to Industry Standards for Power and Communications Applications. It can be installed using open trench methods, HDD (Horizontal Directional Drilled) Plowed, or pulled into conduit. With optional Silicore Permanently Lubricated Lining, PinPoint duct can be maximized for greater pulling and jetting distances, reducing the coefficient of friction over ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
Although the rig is of moderate dimensions, which allows it to operate in restricted locations, it is extremely powerful. Due to its robust engineering and reliability it is capable of drilling in difficult conditions to depths normally beyond a rig of this size. The rig can be set up in various configurations, depending on the client’s need. It is possible to install on board duplex mud ...
-
Manufactured by Dura-Line Corp - part of Orbiabased in USA
Cable-in-Conduit Coaxial trade name ”CableCon” is a HDPE conduit system with Coaxial Cable pre-installed in the finished continuous length reel, eliminating the need to pull in the Coaxial Cable. Normally Coaxial is pre-installed in 13mm through 1.25” conduit is typical. Both Hardline and Service Drop CIC is available. The Cable-in-Conduit Coaxial can be installed via open ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
Solidly constructed and versatile the rig is used for various applications: small water wells, geothermal applications, soil investigations, coring and micro piles. The rig is designed for working safely with various drilling methods: direct circulation, down the hole hammer drilling and augering. Thanks to the remote radio control the rig can be completely move from the ideal working position, ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
The rig is used for various applications, water wells, mineral exploration, deep geothermal applications, coring, seismic. It can drill up to 1500 m and it can be equipped with mud pump or compressor, depending on the customer’s needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). In spite of its big dimensions and extreme power, ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic, it is the most representative in the Massenza’s production range as although the moderate dimensions it has high technical characteristics in terms of pull-up and torque. For these reasons the rig can reach high depths, around (700m) and it is possible to work by mud pump 7”1/2 x 8”, ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1100 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust construction does not prejudice its versatility. The rig can ...
-
Manufactured by Dura-Line Corp - part of Orbiabased in USA
Cable-in-Conduit Fiber trade name ”CableCon” is a HDPE conduit system with Fiber Optic Cable pre-installed in the finished continuous length reel, eliminating the need to pull in or jet in the fiber. Normally Fiber is pre-installed in 1” or 1.25” conduit. The Cable-in-Conduit Fiber can be installed via open trench, plowing or directional drilling. Ideal applications ...
-
Manufactured by Iris Impulse India Private Limitedbased in INDIA
BENAGEL is a trademark registered, high performance bentonite which gives better performance than API / OCMA Specifications. BENAGEL® is a sodium based activated bentonite specially designed for civil engineering applications. Applications / Usages : Production of Geosynthetic Clay Liners, Soil Sealing, Sealant, Sanitary Pit Fills, Diaphragm Cut off Wall, Slurry Coating In Tunnelling, Pipe ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you