Drilling Regulations Equipment For Soil And Groundwater In Ontario
-
PremiumManufactured by AMS, Inc.based in USA
Direct Push Drilling Technology allows for a wide variety of direct push tooling and instrumentation to be advanced into a subsurface lithology using the static weight of the rig, hydraulic down pressure, and rapid hydraulic hammering. Direct Push Tooling is used to perform soil, soil gas, and groundwater sampling. It is also used for soil remediation, and geotechnical sampling and testing. Many ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Engineered for Horizontal Directional Drilling (HDD) and other trenchless ...
-
Manufactured by AZIWELLbased in NORWAY
The AZIDRILL STD steerable wire line core barrel takes directional core drilling several steps forward by providing direct sensing of toolface during each run and oriented B-size core that implies more geological information and faster penetration. The AZIDRILL STD saves money and time as well as make directional core drilling fast and easy to ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Trenchless raceway for electrical and telecommunication ...
-
Manufactured by Maclean Engineering & Marketing Co. Limitedbased in CANADA
The MacLean Series 900 Bolters, the 928 (eight foot-wide deck) and the 946 (seven foot-wide deck) provide a complete ground support system for underground hard rock mines. The benefits of safety, productivity, versatility and quality of installation combine to provide the ideal tool for the mine development cycle and rehabilitation ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS PowerProbe 9110-LAP is a portable direct push rig, designed for use in confined spaces or buildings where a vehicle-mounted probe cannot go. This model can be driven off any standard AMS PowerProbeª with an auxiliary hydraulic hook-up kit, or the optional AMS portable hydraulic power unit. The 9110-LAP comes standard with a 90 ft-lb hydraulic ...
-
PremiumManufactured by AMS, Inc.based in USA
The PowerProbe 9400 Series is our mid-sized PowerProbe. The track-mounted 9410 VTR is compact for limited access areas being 56 inches wide, but maintains great augering (3,000 ft-lb) and direct push drilling (200 ft-lb) power. Fully loaded with all options (winch, SPT Hammer, Direct Push Hammer, and Auger Motor), it has a surface load of only 5.6 psi, which allows you many options in a small ...
-
Manufactured by Devico ASbased in NORWAY
The DeviGyro RG40 Standard is an ultra-versatile survey solution covering a wide range of surveying applications. The assembly offers efficient, continuous or multishot surveying for core drilling, reverse circulation, piling, and most other in-rod surveying ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole hammer drilling and augering. All controls are ...
-
Manufactured by Sandvik Mining and Construction B.Vbased in NETHERLANDS
Sandvik HDD roller-cone rock bits and reamers are specifically designed to meet the rigorous demands of horizontal directional drilling. The cutting structures and bearing designs lower torque requirements, resulting in higher penetration rates and longer operating hours. Sandvik HDD products enable contractors to drill and ream more and longer crossings in a single pass without the need to trip ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole hammer drilling and auger drilling. Numerous ...
-
Manufactured by Devico ASbased in NORWAY
The DeviDrill is an innovative directional core barrel based on the wireline core drilling technology used in exploration drilling. It drills the hole in a curve while at the same time collecting a 3m/10ft core sample, leading to the application name, Directional Core Drilling ...
-
Manufactured by Comacchio S.r.lbased in ITALY
The GEO Line includes compact sized hydraulic drilling rigs mounted on rubber or steel crawler tracks and covering the full spectrum of geotechnical activities, such as soil investigation carried out with destructive and non-destructive coring techniques, in situ penetration tests (SPT), sample collection, installation of piezometers, inclinometers and other geotechnical instrumentation, as well ...
-
Manufactured by Sandvik Mining and Construction B.Vbased in NETHERLANDS
The new Sandvik RH460 hammer takes DTH drilling to higher levels. It has been developed for superior productivity in variable ground conditions. Higher impact energy is achieved at lower air consumption, maximizing productivity and lowering costs. RH460 hammers are available industry standard shanks for greater product ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
Drilling rig for water wells, mineral explorations, seismic, coring and deep geothermal applications. Although its moderate dimensions it has high technical characteristics in terms of pull up and torque: for this reason the rig able to reach high depths (around 800 m). It is possible to work by mud pump 7”1/2x8” which vastly improves drilling also in bad terrain conditions. Its ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
Although the rig is of moderate dimensions, which allows it to operate in restricted locations, it is extremely powerful. Due to its robust engineering and reliability it is capable of drilling in difficult conditions to depths normally beyond a rig of this size. The rig can be set up in various configurations, depending on the client’s need. It is possible to install on board duplex mud ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
Solidly constructed and versatile the rig is used for various applications: small water wells, geothermal applications, soil investigations, coring and micro piles. The rig is designed for working safely with various drilling methods: direct circulation, down the hole hammer drilling and augering. Thanks to the remote radio control the rig can be completely move from the ideal working position, ...
-
Manufactured by Comacchio S.r.lbased in ITALY
The GEO Line includes compact sized hydraulic drilling rigs mounted on rubber or steel crawler tracks and covering the full spectrum of geotechnical activities, such as soil investigation carried out with destructive and non-destructive coring techniques, in situ penetration tests (SPT), sample collection, installation of piezometers, inclinometers and other geotechnical instrumentation, as well ...
-
Manufactured by Massenza Drilling Rigbased in ITALY
Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1000 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust construction does not prejudice its versatility. The rig can ...
-
Manufactured by Devico ASbased in NORWAY
Building on the advanced directional drilling technology Devico is known for, the DeviDrill RSS (Rotary Steerable System) sets a new level for reliability and productivity. This new one-of-a-kind, directional drilling tool incorporates cutting-edge technology and solutions that secure superior directional drilling capability in all rock ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you