Drilling Waste Equipment For Soil And Groundwater In Latin America
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The InfraCal 2 TRANS-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04 and Freon-113, hydrocarbon-free grade of perchloroethylene, AK-225, S-316 or other spectroscopic infrared transparent solvent as the extracting solvent. Since the extract is deposited into a 10 mm quartz ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct Push Drilling Technology allows for a wide variety of direct push tooling and instrumentation to be advanced into a subsurface lithology using the static weight of the rig, hydraulic down pressure, and rapid hydraulic hammering. Direct Push Tooling is used to perform soil, soil gas, and groundwater sampling. It is also used for soil remediation, and geotechnical sampling and testing. Many ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
The heavy material is used with heavy transported materials, such as heavy building site rubble, or as a storage conveyor. Thanks to its stable design, larger distances between supports can be realised. The conveyor is manufactured in a segmented construction. The conveyor belt frame is comprised of stable edge profiles equipped with all cut-outs and bore holes required for attaching accessories. ...
-
Manufactured by Ground Effects Environmental Services Inc.based in CANADA
When used in conjunction with an MPVE system and GEE Pneumatic AirLift System (PALS), the GEE Pneumatic Fracturing System (PFS) adds some serious extra clout. Designed to pneumatically fracture tight soils such as clay, the GEE PFS causes fracturing by injecting air (or gases) at a pressure exceeding the natural strength and in situ stresses already in the formation. Essentially, it acts like a ...
-
Manufactured by Dando Drilling International Ltd,based in UNITED KINGDOM
The cutting edge Dando Duke cable percussion drilling rig boasts a range of innovative features for increased efficiency, safety and productivity. Available in both trailer and track mounted versions, it can be used for many applications including site investigation, shallow water well drilling and mineral ...
-
Manufactured by Ground Effects Environmental Services Inc.based in CANADA
Salt remediation, metals remediation, PCE remediation, and TCE remediation performed in situ. Whether it’s salt, metals or chlorinated hydrocarbons remediation, GEE’s revolutionary EK3 Electrokinetic Remediation technology can remediate a host of contaminants in ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
The troughed belt conveyor is used with lightweight and heavy transported materials. The conveyor is manufactured in a segmented construction. The conveyor belt frame is comprised of stable edge profiles equipped with all cut-outs and bore holes required for attaching accessories. The glide surface of the transported material can be reinforced in the input area. The drive drum is fully gummed in ...
-
Manufactured by Centrisys/CNPbased in USA
The Centrisys CD2600 is a VCD designed to recover base fluids and reduce hydrocarbons from drill cuttings. Operation is based on centrifugal force, enabling a high performance and efficient process. The CD2600 is designed for oil based drill cuttings management where operators are concerned about drilling fluid losses and the environmental impact of oily cuttings. Based on feedstock, liquid ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
Handling the 24/7 demanding requirements of modern wastewater treatment plants is a daily challenge. Looking for a well-proven solution which is continuously improved? Wanting to optimize performance while reducing power consumption? Hoping to reduce costs? Our D-type decanter centrifuges are the ideal solution for almost all wastewater ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The machine has a heated through, containing rotating heated paddle shafts. The specially shaped paddles do not have a transport function but are designed for maximum heat transfer. This results in an excellent control of the temperature of the product and enables a uniform product quality. At the outlet side, the product moves out of the machine via an adjustable ...
-
Manufactured by ROTHENBERGER Werkzeuge GmbHbased in GERMANY
Efficient drilling with the help of the POWER PULSE technology, Optimum drilling results with the powerful extraction rotor, Electronic friction clutch with 20 Nm torque, Safe operation with the electronic soft start with overload indicator, Better operating ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you