Drilling Waste Services For Soil And Groundwater In Canada
-
by Supreme Vacbased in CANADA
Supreme Vac (Edmonton) started in 2005 with one tandem vacuum truck with the mission of providing vacuum services in Alberta. Over the years, we diversified and expanded our services and fleet of equipment to include hydrovac, vacuum, and steam trucks. During the past 15 years, we have travelled across the province and provided vac truck service to many parts of Alberta, from Fort Mckay to ...
-
based in CANADA
Epic supplies experienced professional technical service to analyze and supervise various drilling waste disposal methods including on and off-site disposal and landspreading while drilling (LWD). Landspreading while drilling of spent drilling fluids has proven a convenient method of disposal in sensitive and other areas where pits are not wanted or allowed. LWD allows a quick clean up ...
-
Manufactured by Cadorathbased in CANADA
Our state-of-the-art, technologically advanced facilities allow us to stand above the rest and offer an assortment of valuable added services to our ...
-
based in USA
Oil and gas pipelines often cross the paths of rivers and streams. If a new pipeline is to be installed below the riverbed, or an existing pipe has to be inspected or repaired, the work area along the alignment of the pipe must be isolated, to support dewatering efforts. Depending on the scope of work, a “U-shaped” AquaDam cofferdam may be used to isolate a work area along one bank, ...
-
based in CANADA
We take a responsible approach to the sourcing, use, transport and disposal of water. Various fluids are used throughout our operations, including drilling and hydraulic fracturing. Proper storage, handling and disposal of these fluids are important in preventing contamination of shallow groundwater. Effectively managing fluid storage and disposal allows us to significantly reduce the potential ...
-
based in CANADA
The GPS mapping technologies we utilize for drilling waste management are second to none in the energy sector. This imagery technology can also be applied to broader applications such as water well reporting and environmental site assessment work. Environmental Mapping Via Satellite Imagery Improves Accuracy and Reduces Risk Disposal areas are accurately mapped onto satellite imagery (imagery ...
-
Manufactured by Agri-Plasticsbased in CANADA
We do more than just create products – we also have resources for secondary assembly. We can add metal inserts, drill and make special cuts, add sticker graphics, emboss graphics, add insulating foam, and adding parts like reflectors and seat ...
-
Manufactured by Baker Hughesbased in USA
Baker Hughes provides a full range of technologies to help operators drill their wells safely and more efficiently by increasing penetration rates, drilling farther on each run, and managing drilling waste to minimize environmental ...
-
Manufactured by Weening Brothers Mfg. Inc. (WBM)based in CANADA
We offer several job shop services related to the metal working industry. Our plant is well equipped with sheet metal cutting & bending equipment as well as drilling, punching cutting, machining and painting capabilities. We have a large inventory of both mild and stainless steel sheets, tube, flat bar and much more. Below are a list of fabrication related services we can provide. ...
-
by Spinprobased in USA
Water based and oil based drilling mud as well as waste cuttings from the solids control equipment can be broken down and processed on site or off site. The mud is broken down to release the water which is recovered and pH adjusted for disposal or reuse as make up water. The residual solids are then squeezed to remove as much water as possible reducing the volume of waste for ...
-
based in CANADA
HDD Drilling Waste Management Plan Development. Watercourse Turbidy Monitoring. Frac-out Planning and/or ...
-
based in CANADA
Sumas Environmental Services Inc. (Sumas) operates its own vacuum truck to efficiently and cost effectively remove and transport liquid and semi solid waste materials (both hazardous and non-hazardous) from excavation, surface impoundment, dip tanks and other chemical & fuel storage tanks. Sumas" vacuum trucks are used in remediation work such as removal of fuels and sludge, drilling mud, ...
-
based in CANADA
Radar Concrete Scanning is sometimes confused with Concrete X-Ray to locate post-tension cables and other objects in concrete construction prior to cutting or coring. At Global GPR Services we use Ground Penetrating Radar (GPR) equipment which uses radio waves that are safe and not gamma rays used in concrete x-ray equipment. The radiation from concrete x-ray equipment can be harmful to humans ...
-
Manufactured by Claytek, Inc.based in CANADA
In situ treatment can be more cost-effective and more protective of human health and the environment than traditional dig-and-haul remedies. In situ treatment minimizes excavation and the associated releases of volatiles, eliminating the additional costs associated with landfill disposal. Claytek provides in situ treatment options via solidification/stabilization products and techniques. Claytek ...
-
based in CANADA
As Ontario environmental regulations are more strictly enforced, Curran Recycling is developing new methods to help customers meet these new ...
-
Manufactured by Thor Manufacturing Ltd.based in CANADA
Thor Manufacturing Ltd. is a privately owned company that has been in business since 1945. Thor is an ISO 9001:2015 certified company with a full scale steel manufacturing facility capable of producing assembly-ready components for a wide variety of industries. We have full fabrication abilities, an extensive CNC machine shop with the ability to machine to extremely tight tolerances in large ...
-
based in CANADA
Epic provides on-site drilling, fluid and cuttings sampling and analysis. Epic technicians are equipped and trained for accurate sampling and analysis as per government requirements. The addition of hydrocarbon test kits provides companies with accurate and prompt analysis so disposal options can be assessed in a more timely ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
Drilling cuts: Lamor has designed water treatment technology for drilling cuts with its Finnish partners. As an oil response company Lamor has gathered oil removal know-how for decades and now applies this expertise to water treatment applications. Oil will be removed from drilling cuts with a unique two-phase flotation technology and the collected oil can usually be used in incinerators. The ...
-
based in CANADA
Landspray While Drilling (LWD). Disposal on Forested Public Lands (DFPL). Sump Suitability Assessments. Sump Liner Installation. Drilling Waste Sampling, Analyses, and Directive 050 Disposal Plan Generation. Mix-Bury-Cover Supervision. Landspread Supervision. Pump-off Disposal (Clear Fluids Disposal). Toxic Sump Treatment. Advanced Drilling Fluids Disposal Management (Approvals, Post-Sampling, ...
-
based in CANADA
Drilling Waste Disposal (DWD) Services That Let You Stay Focused on Productivity. Ridgeline delivers landspray consulting and landspray while drilling (LWD) solutions that minimize environmental impacts and maximize your ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you