Erosion Monitoring Equipment For Soil And Groundwater Available In Bosnia & Herzegovina
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In many land use systems all over the world soil deformation is a major problem due to increasing land use intensity. On arable soils machine traffic is continuously intensified with respect to load and wheeling frequency leading to (sub-)soil compaction and deeper soil degradation concerning hydrologic or pneumatic functions. Altered soil functions, in particular reduced hydraulic conductivities ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Extremely robust and reliable acoustic RAIN sensor. The RHD is a low-cost, high precision and ultra-robust rain sensor. It features very low-power consumption, is maintenance-free and has a completely sealed acoustic detector with no moving parts. The sensing device is a polished stainless steel hemisphere supported by a strong stainless steel arm. It detects changes of the acoustic pressure that ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The extent to which the soil is sensitive to erosion is determined largely by the composition of the soil. Knowledge of the sensitivity to erosion is important for the development of a certain plot. The sensitivity to erosion is hard to measure. Absolute values can not be obtained. It is, however, possible to obtain a reasonable indication by means of a relative measurement. For such a ...
-
Manufactured by SeaCultbased in NORWAY
SCP is designed in collaboration with one of our largest offshore companies with many years’ experience with use of ROV and a major European industrial company in concrete production. The objective of finding an efficient production, efficient logistics and simple and secure diverless installations solutions on the ...
-
Manufactured by Energy Technology Centre Ltdbased in UNITED KINGDOM
The ETC rain erosion test facility has recently been upgraded to improve its operating envelope and is now capable of striking test samples with water droplets at up to 150 m/s with water droplets between 1.8 mm and 2.5 mm in diameter, in controllable increments of 0.1 ...
-
Manufactured by EdgeTechbased in USA
The EdgeTech 2200 and 2205 are compact, extremely flexible and configurable sonar system for integration on 3rd party underwater vehicles. They are specially designed for installation and use on Unmanned Underwater Vehicles (UUVs / AUV), Remotely Operated Vehicles (ROVs), Unmanned Surface Vehicles (USVs), and other hosted platforms. This modular unit can be configured, based on the ...
-
based in CANADA
The Rysco Access Fitting is designed to provide Corrosion and Erosion Monitoring in pressurised process systems. The monitoring device can be inserted and removed safely utilising specialist tooling and without the need for costly shut downs or temporary isolations. The Access Fitting Body is available in both a Flareweld and Raised Face Flange connection type. The Access Fitting can be ...
-
Manufactured by Sensorlink ASbased in NORWAY
Pipeline integrity is normally compromised by erosion at choke manifolds and bends. Erosion is caused by solid particles, like sand, impacting the pipeline wall over time. Since the purpose of erosion monitoring systems is to have control over hazardous factors, it is important that such systems are not a threat to the pipeline integrity themselves. By using a non-intrusive erosion monitoring ...
-
Manufactured by AUSAbased in SPAIN
The rough terrain forklift with the lowest cost in the market.Very light equipment distributed equally at the front and rear axel. It causes the minimum erosion to the ground.Reduced measurements and low overall height of 74 in (1,89 m). Lateral operator’s position to ease the access and reduce fatigue.Robust forklift and exclusive transmission technology proven for over 40 years in the ...
-
Manufactured by Berkeley Springs Instruments LLC.based in USA
Primarily used to measure external corrosion/erosion, BSI Ultrasonic Testing (UT) Probes are compatible with your existing pipe access fittings. Designed for both above and belowground tanks, buried piping, and other mechanical structures that necessitate monitoring, these powerful tools help to preserve and protect your ...
-
by Partrac Ltdbased in UNITED KINGDOM
We operate two benthic flumes for the in situ measurement of sediment stability - these are seabed lander systems designed for coastal and offshore use. The flumes are submersible marine instruments which rest unattended on the seabed and apply a controlled flow across the seabed. Sensors are used to measure seabed erosion as it occurs, typically over a 1 to 2 hour experiment time. Data on the ...
-
Manufactured by Wave Eaterbased in USA
WaveEater Model 1224 is a premier product for use in open water swim areas and as a beach erosion mitigation system in small environmentally sensitive locations. ...
-
Manufactured by SMARTCORRbased in USA
SMARTCORR® two-inch coupon corrosion monitoring system consists of Access Fitting, Coupon Holder, and Coupons. Corrosion coupons are one of the widest used methods for the study of corrosion and its effects. They are relatively small, easily inserted and retrieved, and are an economical means of determining cause and effect of ...
-
Manufactured by Ionix ATbased in UNITED KINGDOM
Minimise operational risk and maximise productivity with enhanced asset intelligence. Ultrasonic transducers for 0° measurements ideal for thickness, corrosion and erosion monitoring for use in applications across refining, oil & gas, energy, nuclear, aerospace, and process ...
-
Manufactured by MetaSensing BVbased in NETHERLANDS
The MetaSensing’s MetaSAR can be integrated into small airplanes, helicopters or UAVs for a customized and cost-effective deformation monitoring over large areas. By using processing techniques such as Differential Interferometry (DInSAR), Amplitude Change Detection (ACD) or Coherent Change Detection, it is possible to retrieve the displacement and velocity of slow terrain movements, from a ...
-
based in USA
High-temperature, hard-to-reach locations are not tested as often as they should be. Without adequate testing, plant operators have little-to-no warning of developing problems arising from corrosion and erosion – a costly surprise. Traditional ultrasonic thickness testing (UTT) methods for determining corrosion and erosion on piping and vessel walls can be challenging to execute at ...
-
Manufactured by Soil Stabilization Innovations Inc,based in USA
Erosion Control Plus consists of environmentally safe chemicals which work on principles of nano technology. The acrylic co-polymer creates nano composites within the soil fabrics and modifies the soils micro-structures. This increases the interconnection between the soil particles producing a homogenous and isotropic material. Increasing load bearing strength of all soils. Soils treated with ...
-
by Hydronia LLCbased in USA
The Sediment Transport (ST) module for QGIS and SMS(*) GUIs is an add-on software that complements RiverFlow2D hydrodynamic computations with capabilities to simulate erosion and deposition in rivers and estuaries. The ST module includes formulations that consider transport of fine sediment in suspension, coarser sediment using bed load approach, and combined suspended and bed load transport. It ...
-
Manufactured by Obscape BV.based in NETHERLANDS
Obscape’s Time-Lapse Camera is a robust, fully wireless solution that delivers time-lapse images to your desktop in real-time. It allows you to have a look at your area of interest at any time of the day, wherever you ...
-
Manufactured by Cosascobased in USA
Microcor wireless transmitter is based on Cosasco’s flagship corrosion and erosion measurement technology. It delivers real-time, continuous data directly from the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you