Geological Monitoring Applications available in USA
-
Premium
radon monitor for Radon professional monitoring
A complete range of products for Radon risk assessment, from personal exposure to reference radon ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
manufactuer of geophysical exploration equipment
Resources Prospecting - Underground water detection - Geothermal prospecting - Energy resource prospecting - Metal and nonmetal mineral resources survey Engineering Geology Exploration - City engineering exploration - Cave exploration - Pile foundation Environment Detection - Underground pollutant change detection - Seawater Intrusion Detection - Dam Detection - Underground tank leak detection - Slope failure detection Others - Geological ...
By Geomative Co., Ltd. based in Nanshan, CHINA.
-
Borehole to borehole and borehole to surface tomography imaging
Borehole to borehole and borehole to surface tomography ...
By Advanced Geosciences, Inc. based in Austin, TEXAS (USA).
-
Ground penetrating radar solutions for geological investigation sector
Bathymetry – freshwater lake/riverbed investigations. Bedrock profiling. Karst investigations and sinkhole mapping. Stratigraphy studies. Water table studies. Sinkhole ...
By ImpulseRadar Sweden AB based in Malå, SWEDEN.
-
Seismic borehole and surface solutions for cavity detection sector
Karst structures: Solution processes are a common phenomenon in limestones and dolomites which can lead to karstification causing in many cases cavities. They can be air-filled or filled with fine-grained material, which decrease the soil stiffness and thus the load capacity. Exploratory drillings, which are generally used for soil investigations, provide only local information about the subsoil conditions and are not suitable to detect small-scaled structures in a geologically heterogeneous environment. ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Seismic borehole and surface solutions for seismic tomography
Wind power plants: Wind turbines requires a stable foundation to derive dynamic force into an intact ground. e integrity of the subsurface needs to be inspected prior the design. Underground cavities or tunnels of man-made or natural origin may lead to undesired subsidence or foundation ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Seismic borehole and surface solutions for mining risk assessment sector
Sinkholes: Natural cavities or cavities caused by mining can collapse what lead frequently to sudden subsidence of the subsurface material (sinkholes). Especially in urban areas, considerable damages on buildings can be observed due to the ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Seismic borehole and surface solutions for natural resources sector
Clay exploration: The exploration of clay deposits is of great importance for the nonmetallic minerals industry mainly. Due to the higher conductivity of clay compared to coarser sediments such as sand and gravel geoelectric is an appropriate method to determine the expansion and thickness of clay ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Elemental Analysis for Geological Applications by EDXRF / XRF
In studying the planetary processes and makeup of the Earth (geology), geologists routinely analyze the composition of rock and mineral samples. Rapid elemental analyses for sodium (Na) through uranium (U) can be accomplished through the use of cost-effective, high-performance Energy Dispersive X-ray Fluorescence (EDXRF, XRF) instrumentation without destruction, digestion, or alteration of the sample. Eliminating the need for a wet chemistry lab has made the EDXRF technique of particular interest to the geological ...
By Applied Rigaku Technologies based in Cedar Park, TEXAS (USA).
-
Ground Penetrating Radars (GPR) for Roads and Bridges Construction
The roads and bridges construction and repair demand of careful investigation of road surfacing state, quality of used concrete and geological assessment of ground structure under roads to find any heterogeneity. GPRs can be applied here for: tunnels, road surface thickness measure, runways state assessment. The important advantage of GPRs using – quick road surface ...
By Transient Technologies LLC based in Kyiv, UKRAINE.
-
Nano-analytical microscope systems solutions for geo science sector
The WITec confocal Raman imaging systems are excellent analytical tools for the comprehensive investigation of geological samples, such as the identification and characterization of minerals, or in the observation of mineral phase transitions in high and ultra-high pressure/temperature experiments. With confocal Raman imaging the spatial distribution and association of components or mineral phases, or chemical variation can be observed and this information may contribute significantly to the understanding of a ...
By WITec GmbH based in Ulm, GERMANY.
-
Seismic borehole and surface solutions for Geophysical site characterization sector
Fault zones: Geological faults are related to an increase in weathering and loosening up of the surrounding rock, which causes an increase in hydraulic routing. This lowers the rigidity of the rock and increases the risk for constructing new buildings. In the event of an earthquake, even dislocations are possible along the fault. Seismic refraction measurements enable the mapping of seismic velocities and related material properties. The lateral variations of these velocities then indicate the location of fault ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Seismic borehole and surface solutions for dyke investigation sector
Strength characterization: Seismic methods are suitable to study the strength characteristics of dyke and dams. Seismic measurements are sensitive to density changes and compactness of soils. Therefore, areas with inadequate compactness of dykes can be detected. A correlation with SPT/CPT (Standard/Cone Penetration Testing) is often done because these methods also depend on the mechanical properties of the ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Material Analysis solutions for fiber analyses sector
Understand composite parts behavior with CT scanning. Industrial CT scanning is a valuable non-destructive tool for the determination of fiber orientation and distribution in composite components, as well as the detection of fiber?agglomeration?and porosities, in combination with mechanical properties of the fibers and the matrix. Various parameters about individual fibers can be characterized, like tortuosity, fiber length or diameter, etc. Characterization and classification based on several criteria can be ...
By Rx Solutions based in Chavanod, FRANCE.
-
Electrical Based Tomography Systems for Multiphase Flow
Multiphase flows are complex and unpredictable however they have a significant bearing on the safety, costs and revenues of many processes – particularly in oil and gas, but also in aerospace, chemicals and other ...
By Industrial Tomography Systems Ltd. (ITS) based in Manchester, UNITED KINGDOM.
-
Electrical Based Tomography Systems for Crystallisation/Precipitation
Crystallisation is a key reaction in pharmaceutical and other process sectors. The combination of two ionic species in solution to form a solid frequently produces a strong change in electrical properties which can be tracked using ITS electrical resistance tomography sensors. Sensor arrays are produced on two different ...
By Industrial Tomography Systems Ltd. (ITS) based in Manchester, UNITED KINGDOM.
-
Geochemical Fingerprinting of Coltan Minerals Using LIBS
LIBS spectra contains rich composition information that can help analysts identify the origin or source of geological samples. Read this application note to discover how Applied Spectra’s J200 LIBS Instrument identifies coltan mineral ores important for electronic manufacturing from conflict zones. Request this application note at ...
By Applied Spectra, Inc. based in West Sacramento, CALIFORNIA (USA).
-
Geometry & metrology solutions for coordinate measurement sector
Determination of component's geometries with an ultra-high accuracy in a single and fast scan. Industrial CT scanning has a growing number of industrial applications requiring dimensional metrology. The complexity and the variety of the products, combined with the request for cost and time-efficient solutions for production and product development, create new challenges in quality ...
By Rx Solutions based in Chavanod, FRANCE.
-
Electrical Based Tomography Systems for Batch mixing
Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing). ...
By Industrial Tomography Systems Ltd. (ITS) based in Manchester, UNITED KINGDOM.
-
Civil Infrastructure Software for Dams
Empower your dam safety and efficiency with Proqio's actionable insights powered by data integration from various technologies, comprehensive AI, and data synthesis. Navigate easily, maximize uptime, and stay ahead with predictive analytics and early warning for assured operational resilience and risk ...
By Proqio | Infrastructure Data Intelligence Platform based in SPAIN.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you