Geomechanics Services For Soil And Groundwater Available In Ontario
-
based in USA
Caving is applied to increasingly deep, large, strong, and heterogeneous ore bodies. This increases the risk of stranded reserves in overhangs, potential for cave stall and air-blast, infrastructure rehabilitation or loss, and large-scale caving-induced ...
-
based in USA
All of Itasca’s geomechanical software simulates standard laboratory tests using servo-controlled, periodic, and other boundary conditions, for model calibration, design purposes, or fundamental research. Best of all, such virtual tests are completely non-destructive, repeatable, randomizable, and fully examinable. ...
-
by Geostockbased in FRANCE
With close to 60 years’ experience in the operation of underground storage facilities, Geostock has acquired extensive know-how, reinforced by the unique synergy between its engineering and operations teams. The company harnesses these advantages to initiate and drive a continuous improvement process, while benefiting from feedback from each phase. Intervening throughout the life of an ...
-
based in CANADA
Rock mechanics and geotechnics are fundamental aspects for the successful development and safe operation of mines. Knight Piésold uses practical, cost-effective state-of-the-art investigation and analytical methods to evaluate the geomechanical characteristics for various complex geological and mining conditions. We routinely design and manage site investigation programs, develop pit slope ...
-
based in SWITZERLAND
Underground works are complex infrastructures in a complex environment. We are proud to provide services ranging from geomechanical assessment to design and supervision of the structures and of the fire and life safety equipments and ...
-
based in USA
Itasca has been involved in the real-time monitoring, post-processing, and quality assurance of enhanced oil recovery projects using single- and multi-stage hydraulic fracturing. Company experience covers a wide variety of completions, acquisition geometries, and treatments, employing novel processing techniques where necessary to improve the quality of information feedback to oil and gas ...
-
based in USA
Itasca provides solutions for storage of natural gas or compressed air in lined and unlined caverns. Our diverse team with expertise in analyzing geo-structural interaction, geomechanical, thermal and creep coupled problems assesses the stability and long term performance of storage caverns due to combinations of critical loading conditions in singular and group cavern settings by means of 2D and ...
-
based in USA
Itasca's engineers leverage their knowledge and expertise to provide optimized designs and recommendations for field operations. They use physics- and field-data-based models to understand the complex nonlinear behaviors of geological materials in oil and gas reservoirs. Such models are used to aid design and to anticipate problems during reservoir stimulation and extraction of oil and gas in ...
-
based in USA
Sand production and the sand control technique selected to mitigate or eliminate it, can have a critical influence on the operation of oil and gas wells. A well completion that provides adequate sand control is usually required, but an overly conservative design can have an unnecessary, negative consequence on well productivity or ...
-
Manufactured by Kutec AGbased in GERMANY
Like a Swiss army knife - The Mining department has just about as many functions and applications as a Swiss army knife. There are many different tasks and projects extending to the four corners of the globe: deposit modelling, mine planning steps for underground extraction operations or for solution mining, maintenance concepts for abandoned mines, including securing of abandoned shafts, ...
-
based in SWITZERLAND
Rock mechanics forms part of the much broader subject of geomechanics, which is concerned with the mechanical responses of all geological materials, including soils. Rock mechanics, as applied in engineering geology, mining, petroleum, and civil engineering practice, is concerned with the application of the principles of engineering mechanics to the design of the rock structures generated by ...
-
based in USA
Itasca was involved in the first commercial Enhanced Geothermal System (EGS) project in the EU and for over 15 years has undertaken international research programs for the monitoring of rock damage at reservoir scale. Itasca’s seismic processing software InSite is used for the processing of induced microseismicity and regional seismicity by commercial companies and research institutions ...
-
based in USA
Advanced geomechanical modeling can be used to understand long-term reservoir behavior. Validated models help to optimize fracturing and increase reservoir productivity and recovery. Geomechanical models can also be used to investigate longer term effects, such as compaction and ...
-
Manufactured by Kutec AGbased in GERMANY
Like a Swiss army knife - The Mining department has just about as many functions and applications as a Swiss army knife. There are many different tasks and projects extending to the four corners of the globe: deposit modelling, mine planning steps for underground extraction operations or for solution mining, maintenance concepts for abandoned mines, including securing of abandoned shafts, ...
-
based in USA
GeoMechanics advanced wellbore stability analysis techniques take into account inelastic material behavior and realistic wellbore damage and collapse behavior. This provides more practical mud weight design guidelines than simple elastic ...
-
based in CANADA
SINCE 2010, WE’VE BEEN TRUSTED TO SOLVE THE MOST CHALLENGING ROCK MECHANICS PROBLEMS THROUGH MULTI-PHYSICS COMPUTER SIMULATIONS USING OUR OWN GEOMECHANICAL SOFTWARE IRAZU. Well-suited to the analysis of complex rock mass behaviour. Where conventional approaches fall short, namely those involving progressive damage where a combination of intact rock failure and failure along existing rock ...
-
based in UNITED KINGDOM
As an international leading supplier of geotechnical consultancy services, Atkins offers a comprehensive service in ground technology. With more than 300 professionals, Atkins’ geotechnical reputation is built on the skills, excellence and commitment of our people in all aspects of geotechnical ...
-
based in USA
Wellbore instability while drilling can take many familiar forms such as stuck pipe, hole squeezing, lost circulation, severely-enlarged hole or difficult directional control. Some related problems can arise when these wells are finally drilled to target, including uncertain formation evaluation, poor cementing, casing deformations, and ineffective perforating. These issues cost the world-wide ...
-
by Geovariancesbased in FRANCE
Geovariances provide consulting and mentoring services worldwide, mainly to the Mining, Energy, Nuclear Decommissioning, Contaminated Sites, and Geotechnical engineering industries, but not only. Our versatile team of consultants combines their extensive experience in using our software and Python with their high level of geostatistics and data science expertise to find innovative solutions to ...
-
based in USA
The weight of overburden sediments above a producing formation is supported partially by the rock matrix and partially by pressurized fluid within the porespace. When fluid pressure is reduced by oil and gas production, more of the load is transferred to the rock matrix, resulting in formation compaction. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you