Geomembranes Equipment For Soil And Groundwater In Latin America
-
Manufactured by Propex Operating Company, LLCbased in USA
GEOTEX 104F is a woven monofilament polypropylene geotextile produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. The individual filaments are woven into a regular network and calendared such that filaments retain dimensional stability relative to each other. These characteristics make GEOTEX 104F ideal for ...
-
Manufactured by Propex Operating Company, LLCbased in USA
GEOTEX 401OR is a polypropylene, staple fiber, needlepunched nonwoven geotextile produced by Propex, and will meet the following Typical Values when tested in accordance with the methods listed below. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to biological and chemical environments normally found in ...
-
Manufactured by Propex Operating Company, LLCbased in USA
GEOTEX 102F is a woven polypropylene geotextile containing woven monofilament/fibrillated yarns produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. These characteristics make GEOTEX 102F ideal for the construction of embankments over soft soils, steepened slopes, and modular block and/or wrapped-face retaining ...
-
Manufactured by Propex Operating Company, LLCbased in USA
GEOTEX 135ST is a woven polypropylene geotextile containing heavy woven flat tape yarns produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. These characteristics make GEOTEX 135ST ideal for the construction of embankments over soft soils, steepened slopes, and modular block and/or wrapped-face retaining walls. ...
-
Manufactured by Propex Operating Company, LLCbased in USA
GEOTEX 2X2HF is a woven polypropylene geotextile containing heavy woven monofilament/fibrillated yarns produced by Propex, and will meet the following typical values when tested in accordance with the methods listed below. These characteristics make GEOTEX 2X2HF ideal for the construction of embankments over soft soils, steepened slopes, and modular block and/or wrapped-face retaining walls. The ...
-
Manufactured by Propex Operating Company, LLCbased in USA
GEOTEX 4X4 is a woven polypropylene geotextile containing heavy woven tape/fibrillated yarns produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. These characteristics make GEOTEX 4X4 ideal for the construction of embankments over soft soils, steepened slopes, and modular block and/or wrapped-face retaining ...
-
Manufactured by Propex Operating Company, LLCbased in USA
GEOTEX 651 is a polypropylene, staple fiber, needlepunched nonwoven geotextile produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to ultraviolet degradation and to biological ...
-
Manufactured by Solmaxbased in CANADA
Prolonged exposure to temperatures above 60oC (140oF) can have a negative effect on standard polyethylene geomembranes. When the temperatue exceeds 60oC, the liner's mechanical properties more rapidly break down, causing acceleration in stress cracking and oxidation. This can lead to potential ...
-
Manufactured by Solmaxbased in CANADA
GSE GundSeal geosynthetic clay liner (GCL) is a composite liner system that consists of a high quality sodium bentonite adhered to a smooth high-density polyethylene (HDPE) geomembrane with a spunbonded geotextile to protect the bentonite during installation. This one product composite liner system combines the low permeability of an HDPE geomembrane with the self-seaming characteristics of ...
-
Manufactured by SpillTech Environmental Incorporatedbased in USA
Large-sized Berm is ideal for large-scale spill containment beneath tanker trucks, roll-off containers and ...
-
Manufactured by JSF Hidraulica S.Lbased in SPAIN
High evaporation rates in some regions along with the cost of water for irrigation make floating covers a great investment to reduce water loss by ...
-
Manufactured by SENSOR DDS® MIT Arc Tester product of Sensor (UK) Limitedbased in UNITED KINGDOM
The roller increases daily productivity by 40%. It’s designed to test geomembranes fast and reliably. Fits all models of Arc ...
-
Manufactured by JSF Hidraulica S.Lbased in SPAIN
Water is a vital resource for humans and the right to safe drinking water and sanitation is officially recognized by various international organizations. Among the activities that ensure access to drinking water are the construction of reservoirs, treatment plants, water purification units, and distribution networks. FLOATEC floating covers offer an ideal solution for the coverage of potable ...
-
Manufactured by SENSOR DDS® MIT Arc Tester product of Sensor (UK) Limitedbased in UNITED KINGDOM
The Standard version of our arc tester is suitable for testing exposed non-conductive geomembrane on large scale projects (landfills, water storage ponds, mining leach pads ...
-
Manufactured by SENSOR DDS® MIT Arc Tester product of Sensor (UK) Limitedbased in UNITED KINGDOM
With its length of only 65cm this version of our arc tester is suitable for testing geomembranes installed at small garden fish ponds, flat roofs, etc. Its low weight and small size allow the operator to test such areas ...
-
Manufactured by Propex Operating Company, LLCbased in USA
GEOTEX 311 is a polypropylene, staple fiber, needlepunched nonwoven geotextile produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to ultraviolet degradation and to biological ...
-
Manufactured by WOG Groupbased in USA
WOG-SR 3 layers Geo-membrane products are having unique features like Impressive dimensional stability, tensile strength and puncture ...
-
Manufactured by Agru America, Inc.based in USA
Tough and flexible, HDPE and LLDPE Agru Smooth Liner is the material of choice for containment applications and landfill caps. The chemically resistant material provides consistent thickness and delivers optimum weld speed and weld quality in the field. Agru America’s LLDPE and HDPE Liner meet or exceed GRI GM test values and requirements established by the environmental waste containment ...
-
Manufactured by Agru America, Inc.based in USA
MicroSpike is the material of choice in containment applications where slope stability is critical. Consistent surface structuring gives this textured geomembrane reproducible friction angle values with the highest surface friction values in the ...
-
Manufactured by JSF Hidraulica S.Lbased in SPAIN
The most cost effective system to contain large volumes of air from biofilter units is an aluminium cover. This is made of modular walls with a waterproof plastic geomembrane which is welded on site. The modular system allows for easy change incover dimensions if necessary. The air retaining system should enclose the biofilter to prevent weather conditions affecting water distribution and odour ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you