Geotechnical Engineering (Geotechnical Engineering) Equipment
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 ORD Bubble Gun systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 Bubble GunIM systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In many land use systems worldwide soil deformation is a major problem arising from increasing land use intensity. Altered soil functions, in particular reduced hydraulic conductivities and impeded aeration, influence the top soil layers. This has an important effect on vulnerability to erosion, in particular. Assessing very thin soil layers like soil crusts requires very sensitive and highly ...
-
Manufactured by Praxia Energy S.L.based in SPAIN
);ASDyLFRD(USA);JISC(Japan), Structural calculations arespecifically doneforeachproject, Stainless steel fasteners AISI 304 A2 for the modules and galvanized for the steel profiles. Procedure: Structural calculations, Design of the mounting system, Lay Out, Worldwide supply. Production: Design and structural and geotechnical engineering, ...
-
based in USA
Gregg Drilling has designed a robotic deep sea drill capable of operating in water depths up to 3000 meters. Designed by geotechnical engineers, the deep sea drill can obtain high quality undisturbed soil samples and soil cores up to 150 meters below the sea floor. The drilling methods employed include wire-line rotary and push sampling with ...
-
Manufactured by FPrimeC Solutions Inc.based in CANADA
FPrimeC iPile is an innovative wireless pile integrity testing instrument for low strain testing of deep foundations and piles. iPile helps geotechnical engineers, non-destructive testing specialists, and piling contractors with an effective solution for quality control and quality assurance of ...
-
by GeoLogismikibased in GREECE
BLogPro is a bore log software that will help users to create simple soil borehole logs specially adjusted for the Geotechnical Engineer. The pages created include the most commonly used input data such as technical log data, stratigraphy data and laboratory test data. The software can handle multiple pages inside a single project file and ...
-
Manufactured by Lone Star Drills. a Little Beaver Companybased in USA
The SSK-1 includes a third hydraulic valve, tower kit and spool. It can be used with Little Beaver’s AWJ drilling rod and 2-inch by 24-inch split spoon sampler, which allows users to obtain core samples for environmental tests or geotechnical engineering ...
-
Distributed by GaiaComm Ltd.based in GREECE
quantitative measurements obtained by field instrumentation, provide the means by which the geotechnical engineer, in spite of these inherent limitationsm can design a project to be safe and efficient, and the constructor can execute the work with safety and economy. Thus, field instrumentation is vital to the practice of most geotechnics, in ...
-
Manufactured by SkyTEM ApSbased in DENMARK
SkyTEM304 has been employed worldwide since 2004 for a wide range of applications including mineral, oil and gas exploration, geotechnical engineering solutions and most of the globally acclaimed SkyTEM water mapping projects. Like all SkyTEM technology the current in the coil turns off within a few microseconds. Bias free measurements begin at ...
-
Manufactured by Roctest - part of Nova Metrix LLCbased in CANADA
Geo-textile structures, beside reinforcing capability in the field of geotechnical engineering, can be also equipped with FO sensors for monitoring purposes. Thus DiTemp® SMARTGeoTex Fabric becomes an innovative solution that combines the benefits of using geosynthetic materials with the sensing capabilities of FO for geotechnical ...
-
Manufactured by Jeostokbased in TURKEY
The cone penetration test (CPT) is a common in situ testing method used to determine the geotechnical engineering properties of soils and assessing subsurface stratigraphy. The test is also called, Dutch Cone test. Due to its simplicity and efficiency, the cone penetration test is one of the most commonly accepted and used in-situ testing ...
-
Manufactured by Roctest - part of Nova Metrix LLCbased in CANADA
Besides reinforcing capability in the field of geotechnical engineering, geotextile structures can be also equipped with fiber optic sensors for monitoring purposes. Thus, the MuST SMARTGeoTex Fabric becomes an innovative solution that combines the benefits of using geosynthetic materials with the sensing capabilities of fiber ...
-
by GeoLogismikibased in GREECE
Liquefaction of loose saturated cohesionless soils under the effect of strong ground motion, is one of the most complex topic that the Geotechnical Earthquake Engineer can face. LiqIT is a soil liquefaction analysis software for the assessment of liquefaction potential based on commonly used field data (SPT, CPT and Vs). LiqIT utilizes the ...
-
Manufactured by Singhal Industries Private Limitedbased in INDIA
We, Singhal Industries Pvt Ltd, are one of the leading manufacturers and exporters of premium quality thermoplastic Geomembrane, which can be used with any geotechnical engineering related material. To meet and market a wide range of customer requirements, we design, manufacture and provide Geomembranes and Liners in a variety of ...
-
Manufactured by Terra Aqua Inc.based in USA
vegetation, and/or stabilizes the slope against lateral earth pressure. The design engineer must consider the existing soil conditions, gradient of slope, applied loads, hydraulic impact, shear, and other factors when choosing the appropriate slope protection solution. As with any Geotechnical solution a complete analysis of the existing slope and ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620LF Bubble Gun uses Low-Frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate sediments. Low power requirements and small sub-system component size make this a valuable tool for any survey ...
-
Manufactured by The Best Project Material Co.,LTDbased in CHINA
BPM filament non-woven geotextile is a kind of new material in geotechnical and engineering project. Except for its good mechanical properties of tensile strength and puncture resistance,it also has good drainage ability,acid and alkali resistance and anti-aging. The wider opening size allows it has good permeability and ...
-
Manufactured by World Technologies PTE. LTD.based in SINGAPORE
A Geomembrane is very low permeability synthetic membrane liner or barrier used with any geotechnical engineering related material so as to control fluid (or gas) migration in a human-made project, structure, or system, which has below speciality: Excellent strength and durability. Puncture resistance. Resistance to Abrasion. Flexibility, ...
-
Manufactured by Shanghai Yingfan Engineering Material Co., Ltdbased in CHINA
A HDPE geomembrane smooth is very low permeability synthetic membrane liner or barrier with smooth surface. It can be used solely or with any geotechnical engineering related material so as to control fluid (or gas) migration in a human-made project, structure, or system. The manufacturing of HDPE geomembrane smooth begins with the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you