Geotechnical Monitoring Equipment For Soil And Groundwater In Poland
-
PremiumManufactured by CETCObased in USA
CETCO COATED TABLETS are coated using an aqueous carrier to apply the coating. These untreated organic tablets are compressed into 1/4” (0.64 cm) and 3/8” (0.95 cm) sizes. CETCO COATED TABLETS are certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
Lightweight 8-inch HDPE discharge pipe with lever lock couplings for water transport and temporary pumping installations. The couplings are additionally secured with hose clamps ensuring the discharge pipes can be used for a higher pipe pressure. BBA Pumps pipes are 5.8 metres long as ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
Lightweight 6-inch HDPE discharge pipe with lever lock couplings for water transport and temporary pumping installations. The couplings are additionally secured with hose clamps ensuring the discharge pipes can be used for a higher pipe pressure. BBA Pumps pipes are 5.8 metres long as ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
Lightweight 12-inch HDPE discharge pipe with lever lock couplings for water transport and temporary pumping installations. The couplings are additionally secured with hose clamps ensuring the discharge pipes can be used for a higher pipe pressure. BBA Pumps pipes are 5.8 metres long as ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
Lightweight 10-inch HDPE discharge pipe with lever lock couplings for water transport and temporary pumping installations. The couplings are additionally secured with hose clamps ensuring the discharge pipes can be used for a higher pipe pressure. BBA Pumps pipes are 5.8 metres long as ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
Lightweight 4-inch HDPE discharge pipe with lever lock couplings for water transport and temporary pumping installations. The couplings are additionally secured with hose clamps ensuring the discharge pipes can be used for a higher pipe pressure. BBA Pumps pipes are 5.8 metres long as ...
-
PremiumManufactured by AMS, Inc.based in USA
Reliability and careful selection of components, the distinctive ergonomic and functional design, as well as the continuous scientific research in collaboration with the most important Universities in Italy, has brought to the development of this series of instruments of the latest generation. The N type sclerometer – Novatest design – has been modified to get a higher degree of ...
-
PremiumManufactured by AMS, Inc.based in USA
Take direct readings of shear strength to depths up to 10 ft (3 meters) in soft to stiff clays. Three (3) vane sizes allow for the direct determination of un-drained shear strength of soft to stiff clays. The peak vane value is determined by a calibrated scale ring built into the head assembly. The cross handle is used both to push the vane to the desired test depth and apply the shearing torque. ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620LF Bubble Gun uses Low-Frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate sediments. Low power requirements and small sub-system component size make this a valuable tool for any survey ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Core cutter method, according to Dutch RAW-standard 2010, test no. ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
Especially for fine and, in particular, ultra fine-grained products, pressurized filtration is the technology of choice to achieve an increased specific filtration rate and higher product quality. The TDF comes in a closed design, which allows processing under inert ...
-
Manufactured by POLIPLAST Sp. z.o.o.based in POLAND
The system is resistant to the corrosive activity of ground waters and chemically contaminated wastewater. Material: Ecological Polypropylene HT (fully recyclable). The system is resistant to high temperatures. Rate - 30dm/1min - Temporary flow - Continuous flow. Installation is trouble-free thanks to the high quality of products and quality control system. Outstanding application parameters - ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
More than 10 years have passed since the 5th Water Use Regulation was enforced in 2001. From the perspective on preservation of ambient water quality, it has become a matter of course for companies to be compliant with regulations and observe corporate compliance. Total nitrogen and total phosphorus monitoring in the future has the potential to lead to proactive enhancement of corporate value, in ...
-
Manufactured by POLIPLAST Sp. z.o.o.based in POLAND
Raw material: High-quality unplasticised polyvinyl chloride. Application: Pressure sewage lines and lines of pressure and under-pressure sewage lines. Diameters: Pipes - from Ø90 to Ø160, fittings from Ø 63 to Ø160. Quality: Acceptable working pressure - PN 10. Tight connections are possible thanks to perfect sockets formed by the Italian Sica company machines and special M.O.L. water gaskets. ...
-
Manufactured by German Water & Energy (GWE) pumpenboese GmbHbased in GERMANY
Pumps: At GWE, you not only receive all components from renowned manufacturers technically optimally harmonized and individually coordinated for your water supply, we also offer you a wide range of services. We can configure high-efficiency submerged pump systems optimally for your water supply, hold technical training courses and analyze/repair your submerged pumps, and even collect them on ...
-
Manufactured by RS Technik AGbased in SWITZERLAND
The MaxPox resin system was specifically designed for the in-situ impregnation of liner materials. Features include excellent wetting, outstanding adhesion properties as well as a high degree of resistance. The MaxPox system consists of two solvent-free components: the resin MaxPox® 15M as component A along with different curing agents such as MaxPox® 20, 40, 70 and 180 as component B. ...
-
Manufactured by HP trend, s.r.obased in CZECH REPUBLIC
Plastic pressure pipes are made in the pressure ranges of PN 10, 16, 20 of grey PPR TYPE 3 random polypropylene copolymer, which exhibits high flexibility and excellent pressure resistance for hot water distribution lines and floor heating systems. For export deliveries in any colour that is required by the foreign customer. Pipes as well as shaped pieces are produced on top-quality German, ...
-
Manufactured by HP trend, s.r.obased in CZECH REPUBLIC
Company HP trend, s.r.o., seated in Ludgeřovice near Ostrava, was established in 1997, having taken over the company HYDROPLAST. Currently, it has employed 130 employees and it has belonged among the biggest producers of piping systems of plastics for cold and warm water distribution, under-floor heating and pressurized air in the Czech ...
-
Manufactured by RS Technik AGbased in SWITZERLAND
In addition to RS Technik's complete lining rehabilitation systems, RS MaxPatch® is available for fast, trenchless, selective repair methods. RS MaxPatch® is a proven trenchless cured-in-place point repair system used to renew short sections of up to DN 500 mm diameter gravity-flow pipelines. The corrosion-resistant fiberglass composite system is an excellent means of repairing and ...
-
Manufactured by Ayvazbased in TURKEY
The Dismantling Joints are double flanged fittings that accommodate required longitudinal adjustment and can be locked at the required length with the tie bars supplied. Not only does this system allow for fast, easy maintenance of valves, pumps or meters, it simplifies future pipe work modifications and reduces downtime when changes need to be made. The installation is also straightforward using ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you