Geotechnical Soil Sampling Equipment For Soil And Groundwater Available In Ontario
-
PremiumManufactured by CETCObased in USA
CETCO COATED TABLETS are coated using an aqueous carrier to apply the coating. These untreated organic tablets are compressed into 1/4” (0.64 cm) and 3/8” (0.95 cm) sizes. CETCO COATED TABLETS are certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van der Horst core sampler. Set for sampling to a depth of 7 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into the soil using a falling hammer. After sampling ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van der Horst core sampler. Set for sampling to a depth of 7 ...
-
Manufactured by GeoVistabased in UNITED KINGDOM
Geovista manufactures monitoring geophones for use with long term seismic recording in shallow wells. A three axis geophone is lowered into a shallow well and analogue measurements are measured over time. These geophones are generally deployed as part of a field array of geophones connected to a central database for long term monitoring. Please contact us for more ...
-
Manufactured by GeoVistabased in UNITED KINGDOM
This sonde measures the strength of the local magnetic filed in three (X-Y-Z) axis. Sensors come in three versions, basic, standard and low noise according to their measurement noise floor. The sonde is also equipped with a two axis (X-Y) accelerometer for the correction of the magnetometer outputs in inclined ...
-
Manufactured by Shanghai Zhichuan Electronic Tech Co., Ltd.based in CHINA
This inclinometer probe is used for our in-place inclinometer ZCT-CX100, which is a high-precision sensor developed by Zhichuan Technology. The inclinometer has a maximum measuring range of ± 15 degrees, supporting MODBUS RTU protocol, suitable for construction and civil engineering safety monitoring ...
-
Manufactured by GeoVistabased in UNITED KINGDOM
The Geovista IP sonde measures apparent formation chargeability to detect the presence of disseminated ore bodies. In addition, an SP curve can also be recorded to help locate massive ore ...
-
Manufactured by SDEC Francebased in FRANCE
Groundwater pollution is now a well known problem around the world. The danger occurs when polluting molecules leach through the soil and into a water sheet supplying a drinkable water tank. The SPS 200 soil solution sampling system is a simple equipment built to help environmental scientists study the movements of molecules in the soil. It can extract water coming out of cultivated soils or any ...
-
Manufactured by GeoVistabased in UNITED KINGDOM
The Geovista Digital Borehole Geophone system includes a down the hole digital sonde and a compact digital interface unit at the surface. There is no requirement for a seismograph. The sonde runs on a single conductor, on a standard logging winch. It includes a motorized clamping arm and three SM24 geophones arranged in an X-Y-Z pattern. The motorised clamping arm allows for work in a range of ...
-
Manufactured by Move Solutionsbased in ITALY
Our Single Channel Node is a wireless data logger that makes geotechnical probes suited for LoRaWAN wireless communication. Each node supports one technical probe and the probe's internal NTC (when present). The Single Channel Node can be configured on our Move Cloud Platform: you can set different parameters remotely and monitor the data collected at any time. This new Node comes with increased ...
-
Manufactured by Vertek a Division of ARAbased in USA
Our CPT Cone Systems offer reliable, accurate and reproducible data ...
-
Manufactured by Lone Star Drills. a Little Beaver Companybased in USA
The LST1G+ geotechnical rig is ideal for soil sampling, geotechnical testing and well monitoring in limited-access areas. The unit’s 4-inch-diameter auger drills 6-inch boreholes to 100 feet. The setup includes a tower, cathead and pulley to facilitate standard penetration testing with a 140-pound manual safety hammer. Additionally, the drill’s 5,000-pound lifting capacity ensures ...
-
Manufactured by GeoVistabased in UNITED KINGDOM
The water level indicator is used to provide accurate information on the water level depth in a ...
-
Manufactured by Lone Star Drills. a Little Beaver Companybased in USA
The LST1G+HD geotechnical drill rig offers enhanced power and capabilities compared to the LST1G+, including a planetary reduction gearbox for up to 1,100 foot-pounds of torque, increased pull/push-back force and a strengthened steel frame. The drill includes a tower, cathead, pulley and 140-pound manual safety hammer to facilitate standard penetration testing. A 25-horsepower Honda gas engine ...
-
Manufactured by GeoVistabased in UNITED KINGDOM
Geovista provide a temperature probe used to make precise temperature measurements in a borehole environment. This probe is stackable and can be connected to other Geovista ...
-
Manufactured by Lone Star Drills. a Little Beaver Companybased in USA
The LST1A+ features an auger head drive in place of the water swivel found on the LST1 and LST1+, making it ideal for auger drilling and soil sampling. Its swivel base design swings the rotary aside for quick, easy access to the borehole. The unit is capable of drilling 6-inch boreholes up to 100 feet deep in normal soils using the standard auger and up to 50 feet with the hollow stem auger. An ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you