Geotextiles Equipment For Soil And Groundwater Available In Slovakia
-
ShowcaseManufactured by Texas Boom Company LLCbased in USA
Type I turbidity curtains (also commonly referred to as Type 1 and silt curtains) are intended to control sediment and runoff in calm waters. These turbidity curtains are built with foam-filled floats that are referred to as Freeboards, combined with skirts that typically range in height from 3 to 20 feet. These floating silt curtains impede the flow of silt or sediment that may be suspended in ...
-
PremiumManufactured by CETCObased in USA
BENTOMAT CLT GCL is a reinforced geosynthetic clay liner (GCL) consisting of a layer of sodium bentonite between two geotextiles, which are needlepunched together and laminated to a 20-mil (0.5 mm) double-sided textured HDPE geomembrane. The geomembrane component of BENTOMAT CLT GCL is compliant with the GRI-GM-13 specification for HDPE geomembranes, adjusted for a 20-mil thickness. BENTOMAT CLT ...
-
PremiumManufactured by CETCObased in USA
Reliable and adaptable REACTIVE CORE MAT gives you the versatility for underwater containment mitigation when shallows and slopes rule out the use of other sediment treatments. It goes where you need ...
-
PremiumManufactured by CETCObased in USA
BENTOMAT DN GCL is a reinforced geosynthetic clay liner (GCL) consisting of a layer of sodium bentonite between two nonwoven geotextiles, which are needlepunched ...
-
PremiumManufactured by CETCObased in USA
For high-risk underslab and below-grade vertical walls, LIQUID BOOT® PLUS combines traditional Liquid Boot® spray-applied membrane with high-performance VI-20™, a 20-mil polyethylene-EVOH copolymer membrane, to form a superior vapor intrusion barrier that’s ideal for VOCs including BTEX and chlorinated solvents. Even greater contaminant resistance is achieved when LIQUID BOOT ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Exterior protection for walls in contact with the ground. This system is the safest way to protect below-ground walls which are intended to last over time and will accompany the structure throughout its service life. Retaining walls and other walls that are in contact with the ground are exposed to damp due to capillary action; added to this is the possibility of damp air resulting from ...
-
PremiumManufactured by CETCObased in USA
C-GARD is a geocomposite (GCO) consisting of a layer of recycled rubber between two nonwoven geotextiles, which are needlepunched together. It's environmentally-friendly and ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Bolted storage W-Tank is a light tank, easy to install and thanks to its corrosion-free composition. The plates of storage W-Tank® are manufactured by flex molding process. The Flex Molding process is used to obtain reinforced plastic pieces with high glass fiber content, arranged in the direction of the stress, which leads to high mechanical strength. It consists of injecting a reactive ...
-
PremiumManufactured by CETCObased in USA
CETCO is tackling PFAS. FLUORO-SORB® adsorbent is a proprietary, NSF-certified product designed to globally support remediation efforts surrounding per- and polyfluoroalkyl substances (PFAS). Vetted by leading research universities, FLUORO-SORB adsorbent is proven to be effective and economical. ...
-
PremiumManufactured by CETCObased in USA
BENTOMAT ST is a reinforced GCL consisting of a layer of sodium bentonite between a woven and a nonwoven geotextile, which are needlepunched ...
-
PremiumManufactured by CETCObased in USA
The Global Standard for GCLs: Sodium bentonite-based GCLs provide an excellent hydraulic barrier in applications where leachate in direct contact with the GCL is relatively non-aggressive, or in composite lining applications where the GCL is overlain by a thermally welded geomembrane and hydrates from uptake of innocuous moisture from the subgrade. ...
-
PremiumManufactured by Atlantis International Corporation Pty Ltd.based in AUSTRALIA
Atlantis® Flo-Pipe® and Flo-Log® Infiltration Plates and Tubes are pre-wrapped in quality geotextile and are available in various sizes. They can be connected to each other to create any length. * Custom sizes available upon request. ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
The plates of settler W-Tank are manufactured by flex molding process. The Flex Molding process is used to obtain reinforced plastic pieces with high glass fiber content, arranged in the direction of the stress, which leads to high mechanical ...
-
PremiumManufactured by Flood Defense Groupbased in USA
This product is so much more than a flood defense barrier! It is our product of choice in reinforcing soil from erosion or creating ‘reinforced flood berms’ for flood defense landscaping. This product has long term and short applications and the ability for it to support native vegetation provides a host of aesthetically pleasing, long term ...
-
PremiumManufactured by CETCObased in USA
BENTOMAT 200R GCL is a geosynthetic clay liner (GCL) consisting of a layer of sodium bentonite between woven and nonwoven geotextiles, which are needlepunched ...
-
PremiumManufactured by Texas Boom Company LLCbased in USA
Type II turbidity curtains (also commonly referred to as Type 2 and silt curtains) are intended to control sediment and runoff in slow-moving waters. These turbidity curtains are built with foam-filled floats that are referred to as Freeboards, combined with skirts that typically range in height from 5 to 50 feet. These floating silt curtains impede the flow of silt or sediment that may be ...
-
PremiumManufactured by Atlantis International Corporation Pty Ltd.based in AUSTRALIA
Rapid Drainage: The Atlantis Flo-Wall® range is ideal for the rapid drainage of saturated ground. The Flo-Wall® range is suited for applications including underground car parks, basements, retaining walls and seepage cutoff trenches. High Strength: The Atlantis Flo-Wall® range features high compressive strength that will not crush over time ensuring long term drainage ...
-
PremiumManufactured by CETCObased in USA
BENTOMAT CL GCL is a reinforced geosynthetic clay liner (GCL) consisting of a layer of sodium bentonite between a polypropylene woven geotextile and a polypropylene nonwoven geotextile, which are needlepunched together and laminated to a polyethylene ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Easy Ride is a grid made out of recycled plastic that is ecocompatible and UV ray stabilised, which makes it possible to improve and stabilise surfaces crossed by animals, also large ones, preserving mobility and safeguarding the general hygiene of their living environment. Easy Ride, thanks to its elasticity and stability, is particularly suited to the field of horse riding because it prevents ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Bolted storage W-Tank is a light tank, easy to install and thanks to its corrosion-free composition. The plates of storage W-Tank are manufactured by flex molding process. The Flex Molding process is used to obtain reinforced plastic pieces with high glass fiber content, arranged in the direction of the stress, which leads to high mechanical strength. It consists of injecting a reactive polymer ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you