Ground Vibration Monitoring News
-
NEW! Advanced processing of NS8176-2017 vibration data from road and rail transport 2019
SAVTEK has released an advanced data processing and reporting service for NS8176-2017 ground vibration assessments. Ground vibration data measured using the SYSCOM MR3000C or ROCK ground vibration devices for rail or road events may be submitted to SAVTEK for processing and report generation in accordance with the provisions of the standard to evaluate the suitability of a building or building ...
-
Pacific Conference on Earthquake Engineering 2019
SAVTEK will exhibit SYSCOM-BARTEC seismic monitoring instrumentation for buildings, dams, bridges, airports and other infrastructure at the 11th PCEE being held in Auckland. Instrumentation for monitoring ground vibration during demolition and construction will also be displayed. The Managing Director of BARTEC SYSCOM, Mr Maarten van der Reijden, will be present at the conference and is looking ...
-
The Acoustical Society of NZ - Conference 2018
Making the Building Boom Quiet! Auckland 12- 14 November 2018 SAVTEK exhibited SYSCOM-BARTEC ground vibration monitoring instrumentation for construction and civil engineering projects, including the new ROCK autonomous ground vibration logger and the 4-channel SINUS multi-channel SoundbookTM noise and vibration field analyser at Conference 2018 run by The Acoustical Society of ...
-
Limited Time: Get 20% off Geo Loggers for Education & Research Institutes
Rugged, robust and of the highest quality. A specialized family of Geotechnical loggers adds support for frequency measurements for vibrating wire sensors, while nearly all models offer support for SDI-12 and Modbus communications for smart sensors. Now Through Jan 15, 2019 Education and Research Institutes Save 20% on Geotechnical Data Loggers. For further information contact a CAS Data ...
-
Limited Time: Get 20% Off Geo Loggers for Education & Research Institutes
Rugged, robust and of the highest quality. A specialized family of Geotechnical loggers adds support for frequency measurements for vibrating wire sensors, while nearly all models offer support for SDI-12 and Modbus communications for smart sensors. Now Through Jan 15, 2019 Education and Research Institutes Save 20% on Geotechnical Data Loggers. How To Connect a Vibrating Wire Sensor In our ...
-
Bartec Syscom Conference 2018
Darryl Watkins, National Sales and Rental Manager, attended the International Conference of BARTEC SYSCOM in Lausanne, Switzerland, in October 2018. The new ROCK autonomous ground vibration monitor with 6 month battery life was launched and demonstrated to all distributors from around the world Product developments were displayed and demonstrated to all attendees. ...
-
Collaboration with MUG Engineering
In the pilot “5G monitoring in construction and infrastructure”, Omnidots is collaborating with MUG Engineering on new 5G technologies. Part of 5Groningen from the Groningen Economic Board. Measuring and knowing immediately According to Hans Hainje, head of the Geo-ICT & Geo-Info department at MUG Engineering, the arrival of affordable sensors will be a huge asset. MUG ...
-
Common Types of Geotechnical Monitoring Instruments Used in Construction and Mining
Geotechnical monitoring instruments play an important role within construction, civil engineering, and mining environments. They are extensively used by engineers during construction and expansion projects, and as part of ongoing monitoring activities. Within mines (surface and underground), and on major construction and civil engineering projects, engineers need to measure many different ...
-
Australian Earthquake/Seismic Conference 2016
SAVTEK exhibited SYSCOM seismic and ground vibration monitoring solutions at the joint Australian Earthquake Engineering Society/Asian Seismological Commission Conference at the Melbourne Convention Centre on the 25th to 27th of November 2016. The SYSCOM dam and building/structures seismic monitoring units were displayed, as well as the SYCOM MARMOT units which is the leading seismic shutdown ...
-
Reducing emissions in construction
Here at Casella, we’ve long been on our soapbox promoting better understanding of construction site emissions. So we were delighted to recently hear news of the London Low Emission Construction Partnership, which sees a variety of London stakeholders joining forces to encourage and convince the construction industry to reduce its emissions. The London Low Emission Construction Partnership ...
By Casella
-
Cooling Tower Demolition, Rugeley - June 2021
Vibrock were commissioned by Brown and Mason Group to undertake ground vibration assessment and monitoring during the demolition of 4 cooling towers at Rugeley Power Station in Staffordshire. Persistent modernisation The demolition event which took place on Sunday 6 June 2021 can be viewed at the following link. Rugeley Power Station ...
-
Ashted vibration monitoring used during chimney demolition
Vibration monitoring equipment from Ashtead Technology Rentals played an important role when a famous Lancashire landmark from the Victorian era came crashing to the ground in a controlled explosion. Encia Demolition carried out the detonation of the 65 metre tall Gem Mill chimney in Oldham to make way for a housing development. In order to monitor the ground vibrations caused by the detonation, ...
-
Any Instrument, Any Time, Anywhere
Specialist instrument hire company Ashtead Technology Rentals is expanding its fleet of environmental monitoring equipment even further. General Manager James Carlyle says, “One of the reasons for Ashtead’s rapid growth is that there is no limit to the new instruments that we will stock. Our philosophy is simple; if customers want it, we will supply it. Consequently, whilst gas detectors and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you