Groundwater Drilling Equipment available in Newfoundland

Available in Newfoundland| Near Newfoundland
451 Results found

We couldn't find any results in Newfoundland

Here is a list of results available in Newfoundland

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Soil & Groundwater ×

  • Subcategory: Groundwater Drilling ×

  • Available in: Canada ×

  • Available in: Newfoundland ×

Boart Longyear - Model LS™250 MiniSonic™ - Compact Rig

by Boart Longyear Inc.     based in South Jordan, UTAH (USA)

Boart Longyear is proud to introduce the LS250 MiniSonic, a compact rig perfect for a wide variety of soft ground, shallow drilling for environmental, geotechnical, water, and mining (grade control and leach pads) projects.

Sandvik - Driltech - Model D25 / D40K - Drill Pipe

by Kingsland Drill International     based in Mercersburg, PENNSYLVANIA (USA)

The Sandvik / Driltech design shown here fits the D25 / D40K models. It also comes in larger sizes for the D60K and D80K models.

SIMCO Earthprobe - Model 200 - Probe Drilling / Auger Drilling

by SIMCO Drilling Equipment, Inc.     based in Osceola, IOWA (USA)

The SIMCO Earthprobe 200 proves that dynamite does come in small packages. This auger drilling rig has revolutionized the auger drilling and direct push probe market with its small but stout performance. The SIMCO Earthprobe 200 is ideal for the hard to access direct push probe drilling job. With SIMCO you are not just buying a a probe drilling ...

SIMCO - Model 7000 - Geotechnical Drilling / Environmental Drilling

by SIMCO Drilling Equipment, Inc.     based in Osceola, IOWA (USA)

The SIMCO 7000 is kind of the “SUPER RIG” in our rig line with its massive amount of torque it towers over the competition. It’s ideal for environmental drilling and geotechnical drilling. With SIMCO you are not just buying a drill rig you are getting unmatched service and support that you won’t find anywhere else. The ...

WFT-Well Frac - Model WF2K65 - Wells Drilling System

by Flatwater Fleet, Inc     based in Saginaw (Duluth), MINNESOTA (USA)

It is now possible to greatly improve poor producing water wells that already exist without the time, risk and high cost of drilling new wells. A water well drilled into a rock formation may be dry or low producing because of few or no connections to surrounding water-bearing fractures. Similarly, a water well that has been drilled into a sand and ...

Geoprobe - Model 5410 - Direct Push Unit

by S2C2 Inc.     based in Raritan, NEW JERSEY (USA)

Geoprobe 5410 truck unit offers over 21,000lbs of down force and 28,000lbs of retraction force in a unit mounted within an enclosed box on a Dodge 3500 4X4 truck. This unit is typically used for shallow soil and groundwater sampling.

UK GTC - Drilling Equipment

by UK General Trading Co. Limited     based in London, UNITED KINGDOM

Our principle from USA which manufacturers and supplies API, DNV and ABS approved product range which is as follows:

UK GTC - Drill Pipe

by UK General Trading Co. Limited     based in London, UNITED KINGDOM

We offer Drill Pipe according to API Specification 5D & 7 from mills authorised to use the API Monogram on API Specification 5D & 7 Products. We supply from mills worldwide, but we have a long-term marketing arrangement with mills in Russia and China under which we market their range of drill pipes to many end users. Grade: E-75, X-95, ...

TianHe - Drill Pipe

by Tianhe Oil Group Co.,Ltd     based in Shanghai, CHINA

TIANHE provides a complete line of drill string products, including a full range of jointed drill pipe in nominal sizes from 2-3/8” to 6-5/8” and in a wide range of wall thicknesses. TIANHE drill pipe with a strict quality control regimen from initial materials selection to final inspection, we ensure that each joint of drill pipe meets your needs ...

Model K-100 - 54 mm - Soil Sampling

by Geonor A/S     based in Oslo, NORWAY

Effective sample length for the K-100 model is 700 mm. The sampler can be used on drilling rigs without disassembling rods and sampler between each sampling. The K-100 model is equipped with replaceable cutting head. One thin-walled head intended for undisturbed samples of silt and clay and one coarse head for sandy soil. Sand catcher can be used ...

Model K-500 - 30 mm - Soil Sampling

by Geonor A/S     based in Oslo, NORWAY

Effective sample length for the K-500 model is 700 mm. The sampler can be used on drilling rigs without disassembling rods and sampler between each sampling. K-500 model is equipped with replaceable edges. One thin-walled head intended for undisturbed samples of silt and clay and one coarse head for sandy soil. Sand catcher can be used together ...

Model SMF Series - Fine Grinders for the Plastics Industry

by Herbold Meckesheim GmbH     based in Meckesheim, GERMANY

The fine grinders model SMF are preferably used for soft, fibrous, thin-walled and/or elastic materials, e.g. PE drilling and milling shavings or cellulose sheets.

MARL - Model M 4CT - Auger Drills

by MARL Technologies Inc.     based in Edmonton, ALBERTA (CANADA)

The M 4CT auger drill is an excellent choice when you need powerful drilling capabilities for shallow to intermediate boreholes on rough or uneven terrain. Mounted on the Canycom S25A, the M 4CT's  compact size, powerful drill and tracked carrier make it highly maneuverable, easy to operate, and efficient. Perfect for a variety of ...

Vermeer - Model D9x13 Series II - Horizontal Directional Drill

by Vermeer     based in Pella, IOWA (USA)

Performance redefined. The next generation of Vermeer horizontal directional drills is here. To earn the coveted S3 badge, the D9x13 S3 Navigator horizontal directional drill has gone through substantial testing in a variety of terrain.

Model DTH-RoX HZ 139,7/10 - Horizontal Drilling Hole Hammer

by Robit Plc     based in Lempäälä, FINLAND

Pilot, Down the Hole Hammer, Horizontal drilling Horizontal drilling.

Fixed Axle Tanks

by BakerCorp     based in Shafter, CALIFORNIA (USA)

Process plant, industrial, construction, commercial and oil field applications, pipeline projects, sewage plant outages, drilling chemical storage.

Atlas Copco - Ingersoll Rand - Model T4 IRT4 - Drill Pipe

by Kingsland Drill International     based in Mercersburg, PENNSYLVANIA (USA)

One of the oldest carousel designs on the market, the IRT4 drill pipe design will fit most T4, DM30, DM45, DM50 and DML rigs.

Model CP650 - Drill Pipe

by Kingsland Drill International     based in Mercersburg, PENNSYLVANIA (USA)

The CP650 drill pipe design is utilized on the older CP650 drill rigs, some models of Reichdrill rigs and also the Jaswell drills. It is designed to pin up and is distinguished by the lazy susan slot (woodruff keyway) on the box end.

Model LC36 (KWL700) - Reverse Circulation Drill

by Boart Longyear Inc.     based in South Jordan, UTAH (USA)

Designed with power to spare, the LC36 (KWL700) reverse circulation drill is one of the most powerful and reliable RC drills on the market. With proven performance in some of the toughest conditions, the LC 36 is Boart Longyear’s largest drill, with 36 ton pull back capacity.

Waterwell Drill Rigs - DW320

by Sandvik Mining     based in Amsterdam, NETHERLANDS

Sandvik DW320 is a truck-mounted, top-drive waterwell drill. This drill utilizes chassis engine for power and is designed for mud rotary drilling applications. The DW320 features quick set up at the job site and a highly efficient feed system for drilling efficiency.

Need help finding the right suppliers?

Let the XPRTs do the work for you