We couldn't find any groundwater drilling equipment suppliers or service providers located in Northwest Territories

Here is a list of equipment results with suppliers serving Northwest Territories

Groundwater Drilling Equipment available in Northwest Territories

  • Premium

    Model 04.15.SB - Hard Soils 7m Liner Sampler Stand Set

    With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Soil and Sediment Sampling Product line

  • Premium

    Pneumatic and Hydraulic Drilling Equipment

    Our teams utilize specially-modified pneumatic and hydraulic drilling equipment, allowing us to drill any size at any depth through a variety of materials.

    By Global Diving & Salvage, Inc. based in Seattle, WASHINGTON (USA). from Construction Equipment Product line

  • Premium

    Terand - Model CP-780 - Open Gear Lubricant - Aerosol Spray - 12 Cans/Case

    High tack lubricant that penetrates deep into gear teeth and cable before thickening to a heavy black stringy lubricant. Automatically re-coats gear teeth with each revolution of the mechanism. Contains high wear-resistance additives to prevent viscosity breakdown and spin-off. Unique dual spray valve - pencil spray for those hard-to-reach areas ...

    By Interstate Products Inc based in Sarasota, FLORIDA (USA). from Aerosols - Lubricants & Penetrants Product line

  • Premium

    Eijkelkamp - Model 01.09.SA - 5m Piston Sampler Set for Sampling Max

    The set is very suitable for sampling less cohesive soil layers below the (ground) water table to a depth up to 5 metres. The samples show little disturbance and therefore are suitable for very accurate profile description. With the set 01.09.SA one piston sampler (200 cm) is used with a sample gutter to empty the sampler in. The sampler with ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Soil Drilling and Sampling Product line

  • Premium

    AMS PowerProbe - Model 9110-LAP and 9110-Power - Portable Direct Push Rig

    The AMS PowerProbe 9100-P is a portable direct push rig, designed for use in confined spaces or buildings where a vehicle-mounted probe cannot go. This model can be driven off any standard AMS PowerProbeª with an auxiliary hydraulic hook-up kit, or the optional AMS portable hydraulic power unit. The 9100-P comes standard with a 50 ft-lb ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from 9100 Series Power Probes Product line

  • Premium

    Terand - Model CP-974 - Stainless Steel Coating Aerosol Spray - 12 Cans/Case

    A super tough coating containing pure stainless steel pigment in an ultra durable resin system. Seals, beautifies and protects metal, wood, ceramics and more. Helps prevent deterioration caused by harsh chemicals, severe atmospheres or conditions. Tack Free in 5 Minutes - Hard Cure in 2 hours. Contains 100% Pure 316L Stainless Steel Pigment. Heat ...

    By Interstate Products Inc based in Sarasota, FLORIDA (USA). from Aerosols - Coatings Product line

  • Premium

    Lifewater - Model LDT 360 - Water Well Drill Rig

    The LDT 360 water well drill rig has substantial cost advantages over other kinds of water well drill rigs for sale with comparable capability.  With the LDT 360 price advantage, as many as ten LDT 360 drill rigs cost about the same as only one typical rotary rig. This cost advantage enables entry by small business enterprises to ...

    By Lifewater Drilling Technology based in San Luis Obispo, CALIFORNIA (USA).

  • Premium

    AMS - Compacted Soil Sampler

    Save time and energy in soil conditions where soil probes & slide hammers just won’t get the job done! The AMS Compacted Soil Sampler works great for obtaining “composite” soil samples in hard compacted and frozen soils. The 1-1/16” x 21” Flighted Auger with carbide bit may be connected to any ½” ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Soil Samplers – Soil Augers Product line

  • Quin Delta Drill Ship

    The Quin Delta drill ship is a self propelled ocean-going vessel with a shallow draft of only 5 feet. This allows the Quin to work in a wide range of locations from deep offshore waters, to harbors, rivers, and shallow inland locations and even sit on the mud at low tide to continue testing near shore or under bridges. It was specially engineered ...

    By Gregg Drilling & Testing, Inc. and Gregg In Situ, Inc. based in Signal Hill, CALIFORNIA (USA).

  • SealGuard II - Model 6 - Pack Starter Kit

    Contains all the equipment required to stop fast (in excess of 50 gallons per minute) leaks in any underground structure. The starter kit has 6 tube sets of SealGuard II with static mixers, goggles, gloves, tyvek suit, and a dual component hand caulking gun. All you need to supply is a 5/8 inch drill bit and a hammer drill.

    By SealGuard Inc. based in Gibsonia, PENNSYLVANIA (USA). from SealGuard II Chemical Grout Product line

  • Environmental Products

    The Self-venting Submersible Electric Pump is an economical and effective way of pumping shallow wells. The Stainless Steel Screen Pre-Pack is ideal for use with direct push drill technology for small diameter monitoring wells.

    By RST Instruments Ltd. based in Maple Ridge, BRITISH COLUMBIA (CANADA). from Environmental Products Product line

  • UK GTC - Drilling Equipment

    Our principle from USA which manufacturers and supplies API, DNV and ABS approved product range which is as follows:

    By UK General Trading Co. Limited based in London, UNITED KINGDOM. from Oil Field Supplies Product line

  • Colli-Drill - Forged-One-Piece Drill Rods

    The Forged-One.Piece Drill Roads come in one size, compatible with Vermeer D24x40 type machines. They are made with highly resistant steel pipes, the ends of which are subjected first to forging, then to a thermal treatment in order to improve their resistance and resilience, and lastly to the ends machining in order to obtain male/female threaded ...

    By Colli Drill s.r.l. based in Capena (Roma), ITALY.

  • Model GMR - Multi-Channel Instrumentation

    GMR combines powerful multi-channel instrumentation with advanced software for precise and economical groundwater investigations. GMR technology delivers direct and non-invasive detection of groundwater and characterization of aquifer properties without drilling expensive wells.

    By Vista Clara Inc based in Mukilteo, WASHINGTON (USA).

  • SmallRotoSonic - Drill Rigs Crawler

    The SmallRotoSonic excels through capturing the powerful sonic force in an extraordinarily small and manoeuvrable package, combining efficiency and cost-effectiveness. This rig makes the difference and accelerates your drilling and sampling productivity for a broad variety of applications! Why use direct push when 150Hz RotoSonic delivers faster ...

    By Eijkelkamp SonicSampDrill based in Giesbeek, NETHERLANDS. from Sonic Drill Rigs Product line

  • TR Flex - Ductile Iron Pipe and Fittings

    To accommodate traditional open trench projects, as well as horizontal directional drilling (HDD) applications, the TR FLEX line of products is a flexible and reliable option.

  • Deadline Anchors

    Discovery Drilling Equipment fabricates API certified and monogrammed dead line anchors with the pulling capacities ranging from 30,000 to 150,000 pounds. They are designed to accommodate wire rope sizes from 1'' to 1-7/8''. Left hand and right hand as well as floor or leg mount models can be supplied per customer’s request.

    By Discovery Drilling Equipment, Ltd. based in London, UNITED KINGDOM. from Drilling Equipment Product line

  • Drawworks System

    DDE offers a complete line of AC drawworks that range from 750 HP to 4000 HP. These drawworks are specifically designed to withstand the harshest drilling conditions. All drawworks feature a heavy duty skid, and precision machined gear box, with a gear quality of AGMA 11 or higher. The light and compact AC Drawworks are also available ranging from ...

    By Discovery Drilling Equipment, Ltd. based in London, UNITED KINGDOM. from Drilling Equipment Product line

  • Wireline Coring Systems

    A very efficient coring technique called wireline coring, makes it possible for the core sample to be retrieved from the bottom of the hole without removing the entire rod string. To retrieve the core sample, an overshot is lowered inside the drill rods on a wireline cable until it latches onto the spearhead point of the core barrel head assembly. ...

    By Hole Products based in Little Falls, MINNESOTA (USA). from Diamond Core Drilling Tools Product line

  • Dando - Model Watertec 6 - Drilling Rig

    The Dando Watertec 6 is a high performance lightweight rotary water well drilling rig for conventional open hole drilling using mud, air or water flushing techniques and with down the hole (DTH) hammer, coring and augering capability. This water drilling rig is highly manoeuvrable, simple to position and very easy to operate.

    By Energold Drilling based in Vancouver, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you