Groundwater Monitoring Equipment For Soil And Groundwater
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
These American-made industrial grade pole-mounted inspection cameras help personnel safely and effectively inspect confined spaces, or areas that are too dangerous for workers to physically enter. Inspections can be safely conducted in underground vaults, truck and rail tankers, manholes, and storage vessels – from outside the space, avoiding direct entry. These can also be used for ...
-
PremiumManufactured by USA Borescopesbased in USA
Portable push camera system with a 6mm diameter tip and a long 100 foot insertion probe. The video camera head is flexible and is supplied with bright LED lighting. Ideal for pipelines, ducts, drains or sewer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the hammer with two nylon heads (shock-absorbing) or ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Vectran cable, Ø 1.6 mm, length per m. For installation of Diver in corrosive water. Fixing on monitoring well ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The devices are provided with a probe, which is connected to a measuring tape with centimeter graduation. When the probe touches a conductive liquid, a clear acoustic and light signal is produced. If the cable is then lifted a little, the signal will stop. Determination of this point allows the user to read the depth directly from the measuring tape (accuracy: ± 0.5 ...
-
PremiumManufactured by AMS, Inc.based in USA
The Deluxe AMS Fiberglass Auger Kit provides some protection against possible electric shock when working in areas where buried electric cables may be present. This kit features the trusted AMS Signature Series thread pattern, which takes 2-1/2 revolutions to connect & disconnect. The two-piece 36-inch Tile Probe (with rounded safety tip) has a detachable plastic handle & zinc plated ...
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
The perfect solution to support phosphate elimination as well as phosphate load monitoring - on-site analyzer for orthophosphate measurement in the IQ SENSOR ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The ANACONDA sewer camera is one of the most affordable Pan-and-Tilt pipe inspection systems on the market today. It features a new, completely waterproof 2 inch (50mm) diameter camera head, which is well suited for inspecting sewers, drains, ducts, manholes, culverts, wells, and tanks. This is going to give you the best image quality at a reasonable ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Monitoring well datalogger type Micro-Diver for measuring and recording groundwater levels/temperatures. Range 100 m, -20 till +80 °C. Memory 48000 measurements. Dimensions 18 x 90 mm. Pressure sensor: ceramic. Housing: stainless steel 316L. Accuracy 0.15%/100 m, + 0,1 °C, temperature compensated 0/+40 °C Warranty 1 ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS PowerProbe 9110-LAP is a portable direct push rig, designed for use in confined spaces or buildings where a vehicle-mounted probe cannot go. This model can be driven off any standard AMS PowerProbeª with an auxiliary hydraulic hook-up kit, or the optional AMS portable hydraulic power unit. The 9110-LAP comes standard with a 90 ft-lb hydraulic ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
The SingleSample pressurized disposable bailer system is designed to provide an easy method for filtering metal samples in the field. The pressurized bailer's rugged HDPE construction permits use for both bailing and sampling wells while eliminating cross contamination and decon time. 36" overall length, 1.5" ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The Piezopress system (PZP) consists of individual PVC piezometer tubes with removable pressure sensors. With the tight sensor seat above the filter tip, a closed cell is created at measurement interval depth. Thus, the pore water pressure can be monitores even in low permeability rocks and soils. The Piezopress is a low-cost pore water pressure measurement system for boreholes from a diameter of ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS “Piezometer Groundwater Sampling Kit” was designed in response to our clients’ need for a manually-operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. This complete kit includes everything needed to take groundwater measurements and collect samples to a depth of 12ft., ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93C insertion and inline type flow switch is specifically designed for use in sanitary and hygienic process applications. Its 20Ra finish, available with either mechanical polish or electro-polish finishing, is suitable for applications in food, beverage, pharmaceutical and other clean processes. FCI is the only thermal manufacturer providing temperature compensation to ensure set point ...
-
PremiumManufactured by KISTERSbased in GERMANY
iLevel-GW is an IP data logger designed for very low power data acquisition of level and temperature in groundwater and surface waters. The system can be easily expanded into a multi-channel monitoring device by adding optional sensors for water quality monitoring. By default, an iLevel-GW comes with a coupled water level and water temperature sensor.The vented pressure sensors auto-compensate ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
5.0 micron high capacity groundwater filter each. The SingleSample® High Capacity, Disposable Groundwater Filter Capsule is designed specifically for field filtering groundwater samples for metal analysis with 1/8" NPT threaded inlet and outlets with stepped hose adapter on the inlet side for in line filtering of pumped samples with up to 3/8" ID tubing. Approximately 600 cm² of surface ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Piezometer standpipes are tubes with a perforated part, which is placed in the ground in order to determine the groundwater level (i.e. the phreatic water table) or to monitor the quality and quantity of the groundwater. You can find the best piezometers for measuring groundwater levels at Gouda ...
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
A combination of robust conductivity pocket meter and data logger for all who want to automatically capture and evaluate measured data with the help of a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The filter apparatus, suitable for field and laboratory, has a net filtration area of 130 cm2. The medium to be filtered only has contact with the chemically inert teflon. The rest of the apparatus consist of stainless steel. If the proper filter membrane is used, very agressive fluids and gasses can also be filtered. The filter apparatus can be connected in-line to a peristaltic pump, nitrogen ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II Multi-point Monitoring System is the most advanced airborne molecular contamination (AMC) monitor available, utilizing sensitive and responsive ion mobility spectrometry to detect and characterize airborne molecular contamination from multiple locations within a cleanroom. The system features a 16- or 30-point manifold sampling system and an on-board computer with secure software ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you