piezometer Equipment available in Gambia

Available in Gambia| Near Gambia
29 Results found

We couldn't find any piezometer equipment in Gambia

Here is a list of results available in Gambia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Soil & Groundwater ×

  • Subcategory: Groundwater Monitoring ×

  • Keyword: piezometer ×

  • Available in: Africa ×

  • Available in: Gambia ×

Geonor - Model M-206 - Hydraulic Piezometer

by Geonor     based in Oslo, NORWAY

The piezometer can be pressed down without pre-drilling, normally until approximately 30 m depth. Intended for Ø32 mm extension tube. Adapters to 1' water pipe can be delivered.

Pneumatic Piezometers

by RST Instruments Ltd.     based in Maple Ridge, BRITISH COLUMBIA (CANADA)

RST Pneumatic Piezometers have an unsurpassed record for long term stability and reliability in over 50,000 world-wide installations. RST Pneumatic Piezometers utilize a direct reading pneumatically operated diaphragm, making operation simple while ensuring long term stability and high accuracy at a low cost. Employing the lowest (0.002 cc) ...

Piezometer

by Geotech AB     based in Askim, SWEDEN

Geotech’s integrated electronic “direct push” piezometer is available with or without logging memory and can be used for permanent installation or reused in short-time pore pressure monitoring projects. Geotech electrical piezometers can be pushed statically directly into the ground without pre-drilling*. Monitoring of the ...

STRING - Fully Grouted Multi-Point Piezometer

by RST Instruments Ltd.     based in Maple Ridge, BRITISH COLUMBIA (CANADA)

Fully grouted installation permits multiple piezometers to be simply and reliably installed in a single borehole. The piezometer string and grout pipe are placed in the borehole and cement-bentonite grout is pumped until the borehole is filled. Multi-point Piezometer Strings allow for multiple Vibrating Wire Piezometers to be connected on a single ...

Geonor - Model M-603 - Vibrating Wire Piezometer

by Geonor     based in Oslo, NORWAY

M-603 is a special version of M-600 which is open to the atmosphere and equipped with a rubber membrane above the pressure membrane. Compressed air assistance provides a back pressure in order to relieve the pressure membrane. This will balance the back pressure during push-in penetration and the piezometer will be pressed down more quickly. Back ...

Geonor - Model M-600 Series - Vibrating Wire Piezometer

by Geonor     based in Oslo, NORWAY

The Geonor M-600 series piezometers are vibrating wire sensors which are installed by pushing into soft and loose soils without having to drill a borehole. As with all other Geonor vibrating wire piezometers, the M-600 series offer the maximum reliability available for continuous pore water pressure or ground water level measurements. Geonor *s ...

Roctest - Model CPR - Water Level Indicator

by Roctest - part of Nova Metrix LLC     based in Saint-Lambert, QUEBEC (CANADA)

The CPR is a water level indicator used to measure the depth of water in boreholes, standpipes and wells. Light and compact, it offers an accurate and quick readout of water depth. The CPR is available in a large variety of lengths suitable for all needs. It offers an adjustable sensitivity control with an audible and visual sign.

Model VW - Multiple Piezometers

by Geosense Ltd     based in Suffolk, UNITED KINGDOM

Allows multiple VW piezometers to be simply and reliably installed in a single borehole. It can be connected to a tough urethane jacketed Kevlar® reinforced single cable which prevents vertical void channels. Used primarily where multi-zone monitoring is needed at single locations. No conductors are shared ensuring the independent ...

Geonor - Model M-610 Series - Embedment type Vibrating Wire Sensors

by Geonor     based in Oslo, NORWAY

The Geonor M-610 scries arc vibrating wire piezometers used for direct burial in embankments and earth/rockfill dams, for placement in boreholes, and for water level monitoring in open wells, tanks, and open bodies of water.

Casagrande Standpipe Piezomete

by RST Instruments Ltd.     based in Maple Ridge, BRITISH COLUMBIA (CANADA)

RST’s Casagrande Standpipe Piezometer tip consists of a slotted PVC body that encloses and protects a porous plastic filter element. A PVC Riser Pipe (available from RST) is connected to the tip and extended to the surface. A CPVC body is available for leachate extraction. The Casagrande Standpipe Piezometer is mainly used for measurement of ...

Model 3400 - Semiconductor Piezometers

by Geokon Inc     based in Lebanon, NEW HAMPSHIRE (USA)

The Model 3400 Semiconductor Piezometers and Pressure Transducers are intended for dynamic measurements of fluid and/or pore water pressures in standpipes, boreholes, embankments, pipelines, pressure vessels, reservoirs, etc. They are also used for static pressure movement where the readout system is incompatible with vibrating wire type ...

Open Standpipe Piezometer

by Geotech AB     based in Askim, SWEDEN

Geotech open standpipe piezometers for measuring ground water level are made of sintered bronze filters and can be directly pushed into the soil without pre-drilling. The piezometer is used together with 1' tubes where standard water level meters are lowered into. It is also possible to use a hose for quicker detection of ground water changes. The ...

AMS - Piezometer Groundwater Sampling Kit

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

The AMS “Piezometer Groundwater Sampling Kit” was designed in response to our clients’ need for a manually-operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. This complete kit includes everything needed to take groundwater ...

BAT - Piezometer

by BAT Geosystems AB     based in Vallentuna, SWEDEN

BAT Piezometer is an innovative and proven technology for pore pressure measurements, which has been on the market for more than twenty years. Through the years BAT has gained a lot of experience within the field of pore pressure measurements, which we share with our clients to determine the best instrumentation to meet the specific needs for ...

Gouda-Geo - Piezometer Standpipes

by Gouda Geo-Equipment BV     based in Warmond, NETHERLANDS

A piezometer standpipe is a tube with a perforated part, that is placed in the ground in order to determine the groundwater level (i.e. the freatic water table) or to monitor the quality and quantity of the groundwater. The perforated part of the piezometer standpipe is called the filter tube and is in general 1 or 2 meters long. The 'blind' or ...

Solinst - Model 601 - Standpipe Piezometer

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

The Solinst Model 601 Standpipe Piezometer is designed to be placed within a drilled hole to provide a filtered inlet point. The pointed PVC tip is also suitable for pushing into very loose sands at the base of a borehole, a stream, or into very loose tailings pond sediments.

VanEssen - Model PW Series - Vibrating Wire Piezometer

by Van Essen Instruments     based in Delft, NETHERLANDS

The PW piezometer consists of a vibrating wire sensing element enclosed in a protective steel housing. The sensing element is essentially formed of a steel wire clamped to both ends of a hollow cylindrical body. An electromagnetic coil is used to excite the wire and to measure its vibration period. The period is sensitive to the pressure ...

MEMS Piezometer Modem Logger

by Soil Instruments Ltd     based in Uckfield, UNITED KINGDOM

The MEMS Piezometer Modem Logger combines a high capacity GSM/GPRS enabled datalogger with a small diameter MEMS Piezometer for use in fully or partially saturated soil and rock. Readings are stored on a local SD card and are transmitted in engineering units to any FTP site via the on-board Quad band GSM/GPRS modem. Logger settings are easily ...

Solinst - Model 615 - Drive-Point Piezometer

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

The Model 615 Drive-Point Piezometer is designed as an affordable method to monitor shallow groundwater and soil vapor in suitable conditions.

Model PW Series - Vibrating Wire Multi-Level Piezometer

by Roctest - part of Nova Metrix LLC     based in Saint-Lambert, QUEBEC (CANADA)

The multi-level vibrating wire piezometer is perfect for measuring pore pressures at various depths beneath a single surface location. It allows for quick and reliable installations because multiple PW-series piezometers are connected to a single communication cable. The multi-level piezometer provides significant advantages in terms of time, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you