We couldn't find any piezometer equipment suppliers or service providers located in Haiti

Here is a list of equipment results with suppliers serving Haiti

Piezometer (Groundwater Monitoring) equipment available in Haiti

  • Piezometer

    Geotech’s integrated electronic “direct push” piezometer is available with or without logging memory and can be used for permanent installation or reused in short-time pore pressure monitoring projects. Geotech electrical piezometers can be pushed statically directly into the ground without pre-drilling*. Monitoring of the ...

    By Geotech AB based in Askim, SWEDEN. from Piezometer Product line

  • Pneumatic Piezometers

    RST Pneumatic Piezometers have an unsurpassed record for long term stability and reliability in over 50,000 world-wide installations. RST Pneumatic Piezometers utilize a direct reading pneumatically operated diaphragm, making operation simple while ensuring long term stability and high accuracy at a low cost. Employing the lowest (0.002 cc) ...

    By RST Instruments Ltd. based in Maple Ridge, BRITISH COLUMBIA (CANADA). from Piezometers Product line

  • Model PK45M - Vibrating Wire Multipoint Piezometers

    Multipoint vibrating wire piezometers, also called multilevel piezometers, provide measurements of pore-water pressure at different elevations in the same borehole. Isolation of the pore-water pressure at each elevation is achieved by the fully-grouted installation method.

    By Sisgeo S.r.l. based in Masate (MI), ITALY. from Piezometers Product line

  • STRING - Fully Grouted Multi-Point Piezometer

    Fully grouted installation permits multiple piezometers to be simply and reliably installed in a single borehole. The piezometer string and grout pipe are placed in the borehole and cement-bentonite grout is pumped until the borehole is filled. Multi-point Piezometer Strings allow for multiple Vibrating Wire Piezometers to be connected on a single ...

    By RST Instruments Ltd. based in Maple Ridge, BRITISH COLUMBIA (CANADA). from Piezometers Product line

  • Geokon - Model 3400 - Semiconductor Piezometers

    The Model 3400 Semiconductor Piezometers and Pressure Transducers are intended for dynamic measurements of fluid and/or pore water pressures in standpipes, boreholes, embankments, pipelines, pressure vessels, reservoirs, etc. They are also used for static pressure movement where the readout system is incompatible with vibrating wire type ...

    By Geokon Inc based in Lebanon, NEW HAMPSHIRE (USA). from Piezometers Product line

  • Open Standpipe Piezometer

    Geotech open standpipe piezometers for measuring ground water level are made of sintered bronze filters and can be directly pushed into the soil without pre-drilling. The piezometer is used together with 1' tubes where standard water level meters are lowered into. It is also possible to use a hose for quicker detection of ground water changes. The ...

    By Geotech AB based in Askim, SWEDEN. from Piezometer Product line

  • Casagrande Standpipe Piezometer

    RST’s Casagrande Standpipe Piezometer tip consists of a slotted PVC body that encloses and protects a porous plastic filter element. A PVC Riser Pipe (available from RST) is connected to the tip and extended to the surface. A CPVC body is available for leachate extraction. The Casagrande Standpipe Piezometer is mainly used for measurement of ...

    By RST Instruments Ltd. based in Maple Ridge, BRITISH COLUMBIA (CANADA). from Piezometers Product line

  • Piezo - Model P235S - Resistive Piezometers

    Piezo-resistive piezometers, also called semiconductor piezometers or strain gauge piezometers, are very accurate pressure transducers suitable for high frequency readings and short term applications. Their robust 4-20mA output signals are easy to read and automate with OMNIAlog and suitable for long-distance transmissions. They can be connected ...

    By Sisgeo S.r.l. based in Masate (MI), ITALY. from Piezometers Product line

  • Premium

    AMS - Piezometer Groundwater Sampling Kit

    The AMS “Piezometer Groundwater Sampling Kit” was designed in response to our clients’ need for a manually-operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. This complete kit includes everything needed to take groundwater ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Surface and Groundwater Samplers Product line

  • Roctest - Model CPR - Water Level Indicator

    The CPR is a water level indicator used to measure the depth of water in boreholes, standpipes and wells. Light and compact, it offers an accurate and quick readout of water depth. The CPR is available in a large variety of lengths suitable for all needs. It offers an adjustable sensitivity control with an audible and visual sign.

    By Roctest - part of Nova Metrix LLC based in Saint-Lambert, QUEBEC (CANADA). from Piezometers Product line

  • Model PK - Vibrating Wire Piezometers

    Vibrating wire piezometers are used to monitor pore-water pressure in soils. They are typically sealed in boreholes but can also be embedded in fills, or suspended in a well. Typical applications include evaluating slope stability, dewatering and drainage schemes, overpressure in silt and clay soils, permeability and hydraulic gradients in dams, ...

    By Sisgeo S.r.l. based in Masate (MI), ITALY. from Piezometers Product line

  • Model VW - Multiple Piezometers

    Allows multiple VW piezometers to be simply and reliably installed in a single borehole. It can be connected to a tough urethane jacketed Kevlar® reinforced single cable which prevents vertical void channels. Used primarily where multi-zone monitoring is needed at single locations. No conductors are shared ensuring the independent ...

    By Geosense Ltd based in Suffolk, UNITED KINGDOM. from Piezometers Product line

  • BAT - Piezometer

    BAT Piezometer is an innovative and proven technology for pore pressure measurements, which has been on the market for more than twenty years. Through the years BAT has gained a lot of experience within the field of pore pressure measurements, which we share with our clients to determine the best instrumentation to meet the specific needs for ...

    By BAT Geosystems AB based in Stenkullen, SWEDEN.

  • Gouda-Geo - Piezometer Standpipes

    A piezometer standpipe is a tube with a perforated part, that is placed in the ground in order to determine the groundwater level (i.e. the freatic water table) or to monitor the quality and quantity of the groundwater. The perforated part of the piezometer standpipe is called the filter tube and is in general 1 or 2 meters long. The 'blind' or ...

    By Gouda Geo-Equipment BV based in Hillegom, NETHERLANDS. from Instrumentation Product line

  • Geonor - Model M-206 - Hydraulic Piezometer

    The piezometer can be pressed down without pre-drilling, normally until approximately 30 m depth. Intended for Ø32 mm extension tube. Adapters to 1' water pipe can be delivered.

    By Geonor based in Oslo, NORWAY. from Geotechnical Field Instrumentation- Piezometers Product line

  • Solinst - Model 601 - Standpipe Piezometer

    The Solinst Model 601 Standpipe Piezometer is designed to be placed within a drilled hole to provide a filtered inlet point. The pointed PVC tip is also suitable for pushing into very loose sands at the base of a borehole, a stream, or into very loose tailings pond sediments.

    By Solinst Canada Ltd. based in Georgetown, ONTARIO (CANADA). from Direct-Push Equipment Product line

  • Geonor - Model M-610 Series - Embedment type Vibrating Wire Sensors

    The Geonor M-610 scries arc vibrating wire piezometers used for direct burial in embankments and earth/rockfill dams, for placement in boreholes, and for water level monitoring in open wells, tanks, and open bodies of water.

    By Geonor based in Oslo, NORWAY. from Geotechnical Field Instrumentation- Piezometers Product line

  • Geonor - Model M-603 - Vibrating Wire Piezometer

    M-603 is a special version of M-600 which is open to the atmosphere and equipped with a rubber membrane above the pressure membrane. Compressed air assistance provides a back pressure in order to relieve the pressure membrane. This will balance the back pressure during push-in penetration and the piezometer will be pressed down more quickly. Back ...

    By Geonor based in Oslo, NORWAY. from Geotechnical Field Instrumentation- Piezometers Product line

  • Geonor - Model M-600 Series - Vibrating Wire Piezometer

    The Geonor M-600 series piezometers are vibrating wire sensors which are installed by pushing into soft and loose soils without having to drill a borehole. As with all other Geonor vibrating wire piezometers, the M-600 series offer the maximum reliability available for continuous pore water pressure or ground water level measurements. Geonor *s ...

    By Geonor based in Oslo, NORWAY. from Geotechnical Field Instrumentation- Piezometers Product line

  • VanEssen - Model PW Series - Vibrating Wire Piezometer

    The PW piezometer consists of a vibrating wire sensing element enclosed in a protective steel housing. The sensing element is essentially formed of a steel wire clamped to both ends of a hollow cylindrical body. An electromagnetic coil is used to excite the wire and to measure its vibration period. The period is sensitive to the pressure ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you