Groundwater Sampling Equipment For Soil And Groundwater Available In American Samoa
-
ShowcaseManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
PremiumManufactured by AMS, Inc.based in USA
BioBailers (biodegradable* bailers) are the same high quality PVC disposable bailer as Clear-View bailers. They are augmented with an additive Ecopure which makes them biodegrade* when discarded. BioBailers have been tested for non-leaching using the SPLP EPA 1312 extraction process followed by analysis using EPA 8260 for volatiles and EPA 8270 for semi-volatiles. This is a long duration test of ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily and economically sample soil gas vapors at shallow depths for preliminary testing. The AMS "original" gas vapor probe can take vapor samples in soils to depths of 12' depending on soil conditions. This kit is an excellent choice for shallow gas vapor sampling in soft soil. The kit includes a base section with a probe tip and soil gas access holes above. An included liner rod with tip is ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Clamp with ground pin, for tubes and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Ball valve for tube inside Ø 6 mm, largest Ø 9 mm, stainless steel, set of 5 ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
ThePURO Mini system eliminates multiple ionic components, impurities, and organic substances, resulting in pure water. With a production rate of over one liter per minute, ThePURO Mini is especially beneficial when a large quantity of pure water is required, such as for experimental reaction water, washing water, equipment washing water, and food ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample ring kit model C, standard set to a depth of 2 m. For soil sample rings Ø 53 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this product information leaflet a number of gouge augers are described. Their mutual quality is that they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct Push Drilling Technology allows for a wide variety of direct push tooling and instrumentation to be advanced into a subsurface lithology using the static weight of the rig, hydraulic down pressure, and rapid hydraulic hammering. Direct Push Tooling is used to perform soil, soil gas, and groundwater sampling. It is also used for soil remediation, and geotechnical sampling and testing. Many ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Submersible pump Grundfos MP 1, centrifugal type for purging/sampling monitoring wells, stainless steel 316, pressure head lift maximal 86m, adjustable capacity till maximal 1.8 m3/h, 220V 1.1 kW, for connection to frequency converter, pump Ø 45 mm, 287 mm long. With mounted Teflon power cable 60 m. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sealed crimp splices, polyamid, set of 10 pieces for making waterproof cable extension (1.5-2.5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The ergonomic hand auger set for heterogeneous soils is used to carry out manual drilling and sampling in a great variety of different soils in an ergonomically sound way. It is particularly suitable for general soil investigation (description of the layering, geology, archaeology) as well as taking samples for such activities as environmental research. It can carry out drillings to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This bailer sampler consists of a stainless steel tube and is available in a design with a 33 mm or 45 mm diameter and a content of resp. 250 ml and 1000 ml. The stainless steel tube is open at the top-end and fitted with an unscrewable cap at the bottom. A ball check is fitted in the bottom. As soon as the water sampler is lowered it can be lifted again. To assure a proper replacement of the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston sampler, set for sampling to a depth of 5 ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS 6-inches (152mm) Gas Vapor Implant Installation Kit are used for permanent soil gas monitoring, UST monitoring, groundwater sampling, air sparging, vapor extraction monitoring, and as a pressure measurement point in vacuum testing. This kit allows a user to obtain or collect a soil gas sample by positioning or placing a 6” implant in the subsurface, and subsequently withdrawal a sample ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample ring kit model E, with heavy duty sample ring holder for sampling in hard soils. Standard set for a depth of 2 m. For soil sample rings Ø 53 mm. ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
The SingleSample High Capacity, Disposable Groundwater Filter Capsule is designed specifically for field filtering groundwater samples for metal analysis with 1/8" NPT threaded inlet and outlets with stepped hose adapter on the inlet side for in line filtering of pumped samples with up to 3/8" ID tubing. An optional stepped barb can be threaded on each end for use of up to 1/2" tubing. 10.0 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The filter apparatus, suitable for field and laboratory, has a net filtration area of 130 cm2. The medium to be filtered only has contact with the chemically inert teflon. The rest of the apparatus consist of stainless steel. If the proper filter membrane is used, very agressive fluids and gasses can also be filtered. The filter apparatus can be connected in-line to a peristaltic pump, nitrogen ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tube connection, stainless steel, for connection of tube with Ø 18 x 13 mm to submersible pump Grundfos MP ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tube connection, stainless steel, for connection of tube with Ø 12 x 16 mm to submersible pump Grundfos MP ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you