Groundwater Sampling (Groundwater Sampling) Equipment In Asia & Middle East
-
PremiumManufactured by AMS, Inc.based in USA
AMS groundwater samplers are often used for the initial site investigation because of the ability to rapidly sample a large number of locations, and to collect representative samples of all contaminants. Small diameter groundwater monitoring wells are installed by direct push. Our kits provide everything needed for quick and ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS “Piezometer Groundwater Sampling Kit” was designed in response to our clients’ need for a manually-operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. This complete kit ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 410 Peristaltic Pump operates to the suction lift limit, allowing vacuum pumping or pressure delivery of liquids or gases. It is ideal for vapor or water sampling from shallow wells and surface water. The pump has reversible flow, a variable pumping rate and allows the use of either 3/8" or 5/8" (10 mm or 16 mm) silicone tubing. The pump ...
-
Manufactured by QED Environmental Systems, Incbased in USA
QuickFilter cartridges are the original ground water sampling filter for field use, developed to meet the stringent purity requirements of sensitive ground water quality monitoring programs. When sample filtration is required, disposable QuickFilter cartridges are easier to use, faster, and provide more consistent results than other ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 407 Bladder Pump has a durable PFAS-free PTFE bladder ideal for dedication, and ensures no air/water contact during groundwater sampling. Inexpensive, disposable LDPE bladders are also available for short term applications. Solinst offers 316 stainless steel pumps in diameters of 1" and 1.66" (25 mm and 42 mm). They are ideal for low ...
-
Manufactured by QED Environmental Systemsbased in USA
The Sample Pro XD Portable Pump is the first pump developed specifically to bring the advantages of low-flow sampling to sites requiring portable pumps. Pneumatic design can be operated with compressed air or compressed gas cylinder for complete ...
-
Manufactured by QED Environmental Systemsbased in USA
Well Wizard Bladder Pumps: The Original, Low-Flow Sampling Standard. Well Wizard pumps for MicroPurge low-flow groundwater sampling systems come in an unsurpassed range of sizes, materials, and capabilities, including models for deep sampling wells, narrow or obstructed casings, and small-volume pumps for low-yield monitoring ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The Sample Pro pump and tubing are and have always been PFC-Free. The Sample Pro Portable Pump, the first pump developed specifically to bring the advantages of low-flow sampling to sites requiring portable pumps, has been shown to be PFC-Free. Sample analysis by an independent laboratory showed no detections for 24 different ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Well Wizard pumps for MicroPurge low-flow groundwater sampling systems come in an unsurpassed range of sizes, materials, and capabilities, including models for deep sampling wells, narrow or obstructed casings, and small-volume pumps for low-yield monitoring wells. Together with MicroPurge controllers, flow cells, and accessories, they ...
-
Manufactured by QED Environmental Systems, Incbased in USA
With only three moving parts the product is more reliable over electrical or piston type pumps. This combination of sampling accuracy and reliability is unmatched by other ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The 3020 Compressor is a useful option for low-flow sampling of wells at depths to 200 feet. It runs on a 12 volt DC electrical supply, and can be connected to your vehicle's battery with the supplied cables, or driven by a separate power source. At just 15x11x6-1/2" and 15 pounds, it offers an extremely convenient, portable pneumatic power ...
-
Manufactured by QED Environmental Systemsbased in USA
The MicroPurge basicsTM MP10 Controller revolutionizes low-flow sampling with advanced logic control of purge flow and well drawdown. Simple up-down arrow keys increase and decrease purge flow, driving a microprocessor to re-create expert techniques for low-flow adjustment. Then, optimized settings are identified for recall in the next ...
-
Manufactured by QED Environmental Systems, Incbased in USA
This dedicated, in-well equipment is deployed at the desired position in the screen interval with up to six Snap Samplers and six individual sampling bottles. The design allows for the collection of groundwater samples which are in dynamic equilibrium with the aquifer through a simple, no purge/passive technique. Advantages: No-Pump, ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Unique, All-in-one Design Senses Water at the Pump. QED’s new Power Pro ESPTM low-flow electric sampling pump (patent pending) has an all-in-one design with user friendly controls built into the reel. You won’t need a heavy AC generator – just run the Power Pro off your vehicle’s battery, or go mobile in the field ...
-
Manufactured by QED Environmental Systems, Incbased in USA
QED has combined its rugged and reliable fan-cooled 12 VDC air compressor with the time-proven QED MicroPurge Basics controller to provide an "all-in-one" package. Expert flow and drawdown control for low-volume purging and air compressor - all in one. The MP50 also offers an easy way to prevent excessive monitoring well drawdown during purging, by linking to the optional MP30 Drawdown/Water ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Limiting drawdown is one of the basic requirements of proper low-flow sampling. The MicroPurge® MP30 (U.S. Patent Number 6,456,201) Drawdown/Water Level Meter provides a unique and simpler way to assure proper drawdown control. The MP30 switches between two modes- as a drawdown sensor and control when connected to the MicroPurge ...
-
Manufactured by QED Environmental Systems, Incbased in USA
QED PurgeScan Technology provides an easier and more accurate assurance of purge stabilization. Successful, consistent low-flow ground water sampling is based on knowing when purge water indicator parameters stabilize. This ensures that sampling begins only when the samples are truly representative of water in the surrounding ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The MP15 (U.S. Patent Number 6,508,310) MicroPurge Backpack combines advanced low-flow control with the quiet power of a built-in compressed gas source, for the ultimate in portability and ease of use in sampling ground water with bladder pumps. The MicroPurge MP15 (U.S. Patent Number 6,508,310) Controller revolutionizes low-flow ground ...
-
Manufactured by QED Environmental Systemsbased in USA
The MP15 MicroPurge® basics™ Sample Pack combines advanced lowflow control with the quiet power of a built-in compressed gas source, for the ultimate in portability and ease of use. The simplified flow and drawdown control features of basics control are housed in a molded case along with a lightweight CO2 cylinder, putting everything ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The MicroPurge MP10 Controller (U.S. Patent Number 6,508,310) revolutionizes low-flow ground water sampling with advanced logic control of purge flow and well drawdown. Simple up-down arrow keys increase and decrease purge flow to meet low-flow requirements. Once optimized, settings can be easily recalled in the next round of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you