thermal remediation service Articles
-
Reviewed - Top 5 Thermal Soil Remediation Companies
Soil remediation broadly refers to the ‘repair’ and ‘renewal’ of contaminated land. To preserve the sanitation of the area, contaminants in the land are treated or removed using different soil remediation techniques. However, one of the most effective techniques that have greatly evolved over the years to restore the damaged soil is the thermal soil remediation technique. ...
-
TCE remediation in low permeability soil olney, Illinois
Thermal Remediation Services, Inc. (TRS) successfully completed the remediation of subsurface trichloroethene contamination in a mixed-phase environment on a time-based, fast-track, guaranteed basis. By utilizing TRS’ signature Electrical Resistive Heating (ERH) technology complimented by vapor recovery, TRS was able to overcome significant challenges that included: A low permeability ...
-
Portland, Or - Deep, DNAPL remediation
In 1999, the senior managers of Thermal Remediation Services, Inc (TRS) while working for a former employer, as a subcontractor to AMEC, provided Electrical Resistance Heating (ERH) for VOC-impacted groundwater at a commercial site in Portland, Oregon. The remediation was conducted under the Oregon Department of Environmental Quality (DEQ) Voluntary Cleanup Program. The remedial action objective ...
-
Maywood, Ca - Pemaco superfund site
Thermal Remediation Services, Inc. (TRS) subcontracted to TN & Associates to provide an Electrical Resistance Heating (ERH) remediation of trichloroethene (TCE) in soil and groundwater at the Pemaco Superfund Site located in Maywood, California. This is the first EPA Record of Decision (ROD) in California that includes ERH as the selected technology for the treatment of a deep TCE source ...
-
Eastern Montana - Remediation below operating facility
Thermal Remediation Services, Inc. (TRS) worked as a subcontractor to Kennedy Jenks Consultants (KJ) to remediate trichloroethene (TCE) in soil during the winter months in Eastern Montana. The project was performed for a firm fixed price based on the TRS standard contract that included installing and operating the ERH system until either the remedial goal was achieved or the design energy was ...
-
Three-Phase Heating? Six-Phase Heating? Which is Better?
First off, both “three-phase heating” and “six-phase heating” are varieties of Electrical Resistance Heating (ERH) – there really isn’t that much difference between them. The skill of the electrode designers and the experience of the operators are far more important to the success of your project than is the number of electrical phases. Thermal Remediation Services uses the best phasing technique ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you