Groundwater Treatment Software For Soil And Groundwater Available In Trinidad & Tobago
-
based in CZECH REPUBLIC
This program is used to create digital terrain models (DEM, DTM) from inputted points and holes. It calculates volumes of excavation and also serves as task manager for other GEO5 ...
-
by Geo2X SAbased in SWITZERLAND
Refraction seismology investigates refracted wave seismic velocities. The analysis is based on precise measurement of the propagation time between an energy source and vibration captors called geophones. Refraction seismology sections allow us to define the present lithologies as well as their geometry and velocity variations ...
-
by TerraMathbased in INDONESIA
SedTec (WinGeol based): Numerical simulation of erosion and sedimentation in dependency of topography, tectonic movements, lithological properties and sealevel. This software is based on WinGeol and therefore data preparations and visualization of results can be done within one software package. To compare simulation results with the real world situation virtual wells can be generated and ...
-
based in USA
The Matrix Diffusion Toolkit, developed for the Department of Defense ESTCP program, is an easy-to-use, comprehensive, free software tool that can assist site personnel to effectively and efficiently estimate what effects matrix diffusion will have at their site, and transfer the results to stakeholders. The Toolkit provides the following tools to calculate and evaluate matrix diffusion ...
-
based in USA
The mass balance paradigm is an important new approach to evaluating Monitored Natural Attenuation (MNA) at chlorinated solvent sites. By using the mass balance approach, site managers can demonstrate that the assimilative capacity of a particular system is either capable (or incapable) of managing the mass flux of chlorinated solvents emitted from a source zone. In addition, a detailed mass ...
-
based in USA
Create 3D models with speed & simplicity using GMS - the most intuitive & capable platform for groundwater & subsurface ...
-
based in USA
ESRI and Aquaveo are pleased to bring you the Arc Hydro Groundwater Tools to help you better manage your groundwater and subsurface data within ArcGIS. Based on the Arc Hydro Groundwater data model, the tools will enable you to take advantage of the ArcGIS platform to archive, manage, and visualize your groundwater ...
-
based in USA
SVENVIRO offers geo-environmental analysis applications. The set is well-suited for solving complex flow and contaminant transport models, coupled flow and freeze/thaw analysis, and coupled flow, thermal, and pore-air flow models. The freeze/thaw analysis includes a comprehensive climatic interface. The set uses the power of the FlexPDE finite element solution engine. FlexPDE provides the ...
-
based in USA
The RBCA Tool Kit for TRRP is a state-specific customization of GSI's popular RBCA Tool Kit for Chemical Releases software. It is designed to complete the calculations required for Tiers 1 and 2 of the Texas Risk Reduction Program (TRRP). The RBCA Tool Kit for TRRP utilizes Texas-specific default parameters, modeling options, and chemical data consistent with the TRRP rule (30 TAC Chapter 350) ...
-
based in USA
2D PlaxFlow is an add-on module to PLAXIS 2D. Groundwater flow is an important issue in many engineering fields such as geotechnical, environmental and hydrological engineering. In order to take groundwater flow into account in geotechnical software applications, advanced models for the simulation of the unsaturated, time-dependent and anisotropic behaviour of soil are required. ...
-
based in SWITZERLAND
The SPRING finite element-based software is developed by our german partner delta h. SPRING main capabilities are: 2D/3D groundwater flow; steady-state/transient, saturated and unsaturated flow regimes; density dependent heat and contaminant transport; model calibration; definition of well catchment areas. ...
-
based in NETHERLANDS
MicroFEM for Windows is a Finite-Element Program for Multiple-Aquifer Steady-State & Transient Ground-Water Flow ...
-
by ANSDIMATbased in AUSTRALIA
AnsPit assists hydrogeologists in mine dewatering projects to calculate open pit inflow and predict (optimize) operation of a dewatering ...
-
based in USA
The Groundwater Sensitivity Toolkit was developed by GSI for the American Petroleum Institute and the California MTBE Research Partnership. The Toolkit was designed to help site managers, water purveyors and regulators evaluate the sensitivity of a groundwater resource to a potential release of compounds of concern (e.g., an MTBE-oxygenated fuel) at a particular site. The toolkit runs on ...
-
based in ROMANIA
Slope stability software carries out the analysis of soil or rock slope stability both under static and seismic conditions, using the limit equilibrium methods of Fellenius, Bishop, Janbu, Bell, Sarma, Spencer, Morgenstern & Price, Zeng Liang and (DEM) Discrete elements method for circular and non circular surfaces by which it is possible to ascertain slippages in the slope, examine a gradual ...
-
by RapidAIbased in USA
Automated reporting for reaching clinical goals. RapidAI Insights is a valuable solution for multi-site systems and referral networks looking to standardize patient care processes and optimize operational efficiencies that help to reduce costs across sites, while simultaneously improving patient outcomes, and saving more lives. ...
-
based in ITALY
This program perform all the function of the Isomap package and can be considered as it extension. Most of the complex problems related to ground-water modeling can be solved with INQUIMAP. It allows the geometric modeling of the water table and the insertion of one or several wells, flooded areas, barriers and impermeable barriers, recharge points and variations in permeability. The obtained ...
-
Manufactured by Trimblebased in USA
A monitoring installation lets you detect displacement or movement in natural and manmade structures. It provides the data you need to understand the speed, direction and magnitude of any motion. The software is the core of your monitoring project. It controls the measurements, manages and analyzes the data, and provides decision ...
-
based in AUSTRALIA
GeoModeller is designed from the ground up for building complex, steady-state, implicit 3D geological models, and performing forward & inverse geophysical modelling directly from your project. Comprising an intuitive editor, drill holes/grids/mesh managers, modules for 2D/3D geophysical and geothermal modelling, and airborne EM inversions – Geomodeller can manage and interpret your oil ...
-
based in USA
FLAC, Fast Lagrangian Analysis of Continua, is numerical modeling software for advanced geotechnical analysis of soil, rock, groundwater, and ground support in two dimensions. FLAC is used for analysis, testing, and design by geotechnical, civil, and mining engineers. It is designed to accommodate any kind of geotechnical engineering project that requires continuum analysis. FLAC utilizes an ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you