Comes with 6 tube sets of SealGuard II and 6 static mixers. SealGuard II requires a Dual Component Caulking gun for injection (available on this website). May require 5/8' drill bit depending on application.
Cretex Fast~Grout 52 is a custom-formulated hydrophobic waterstop and void filling product that produces a rigid closed-cell foam. Typical uses for Cretex Fast~Grout 52™ are stopping fast-flowing water infiltration in joints, cracks, and pipe intrusion areas.
Comes with 12 tube sets of SealGuard II and 12 static mixers. SealGuard II requires a Dual Component Caulking gun for injection (available on this website). May require 5/8' drill bit depending on application.
AV-254 Gelseal is a chemical grouting product which forms a gel mass when it comes in contact with water. AV-254 is a low viscosity urethane prepolymer grout and is applied in much the same manner as acrylamide grout, but has the advantages of being a one-component system. AV-254 Gelseal has superior strength and safety features compared to other ...
AC-400 Acrylate Chemical Grout is a patented, new monomer system sealant designed for controlling infiltration in sewer joints, for water control during tunneling operations and for curtain grouting. AC-400 Grout contains no acrylamide monomer.
Sauereisen Multi-Purpose Epoxy Grout No. F-150 is a multi-purpose epoxy resin grout specifically formulated for use where good chemical resistance and flowability are needed. Ideally suited for maintenance applications do to its low exothermic cure reaction.
Sauereisen Furan Resin Mortar/Grout No. 21C is a two-component, 100% carbon- filled bonding material for chemical resistant masonry units and quarry tile. No. 21C and chemical-resistant masonry units used with a suitable membrane form a complete system to protect concrete and steel substrates from attack by corrosive chemicals and physical abuse.
GroutAid is a microsilica (silica fume) based additive for use in combination with microcement and other cement-based grouts. The use of GroutAid will increase efficiency of injection grouting by improving both the plastic and hardened properties of the grout, enabling injection into soils and cracks in rock and concrete. This ...
Polypropylene multifilament fibers are high performance and high chemical resistance fibres developed for crack control of concrete i.e. to reduce the incidence of plastic shrinkage cracking. Thrace Group PP Multifilament Fibres are specially engineered and manufactured for use in concrete, mortar or grout.