Only show results in Virginia? Ok

Grouting services for Soil and Groundwater

  • Compaction Grouting Services

    Compaction grouting is a ground improvement technique that improves the strength and stiffness of the ground by controlled, high pressure injection of low-mobility cementicious grout. As the grout mass expands, the soil is displaced and compacted. If injected properly, the grout does not flow away from the injections zone or significantly permeate ...

    By GeoStabilization International (GSI) based in Grand Junction, COLORADO (USA).

  • Ground Improvement Methods & Design Services

    There are various treatment techniques that are available to improve the condition of poor or unstable ground by altering the nature of the soil insitu. For example, where loose sands or man- made fill are encountered, deep densification methods can be used to increase the density of the material to a degree that allows for construction of shallow ...

    By GZA GeoEnvironmental, Inc. based in Bloomfield, CONNECTICUT (USA).

  • Block/CMU Wall Scans Services

    NON-DESTRUCTIVE X-RAY TESTING OF CMU WALLS. Without proper grouting, concrete walls can be dangerous and unsound! Do you know if your walls are structurally safe? Block walls (CMU) are a commonly used construction method - yet once a block wall is covered, it can be almost impossible to 'see' issues within the block wall. Thermography is a ...

    By Gratton Arabia Ltd. based in Mississauga, ONTARIO (CANADA). from Infrared Thermography Services Service line

  • Bluff Stabilization Services

    Bluff Stabilization GeoStabilization International’s tools and techniques are uniquely suited for coastal and riparian zones. In extremely corrosive environments, launched fiberglass soil nails and fiberglass SuperNails can be used. These nails can be perforated to act as drains or pressure grouted with cementicious or non-cementicious ...

    By GeoStabilization International (GSI) based in Grand Junction, COLORADO (USA).

  • Channel Rehabilitation

    Complete rehabilitation of accessible channels. Sealing by means of surface injection gatter lining fissure grouting. Brick-work joining inflow and outflow reorganization.

    By KURT Kanal- und Rohrtechnik GmbH based in Chemnitz, GERMANY.

  • Construction Materials Testing & Inspection Services

    Cardno ATC provides systematic testing and inspection services to assure materials utilized during construction meet project specifications and sustainability goals. Whether your project is simple or complex, Cardno ATC has the QA/QC expertise to meet your needs. We routinely provide testing and inspection services during construction of ...

    By ATC Associates Inc. based in Woburn, MASSACHUSETTS (USA).

  • Cement Grouting Services

    Multiurethanes provides technical services for complex cement grouting applications, including training, troubleshooting, equipment and products.

    By Multiurethanes Ltd. based in Mississauga, ONTARIO (CANADA).

  • Contact Grouting Services

    Contact grouting involves the filling of void space between a cast-in-place (CIP) structure and the in-situ geo-material. Generally, the intent of contact grouting is to increase the structural integrity of the CIP structure. Contact grouting is typically done in association with CIP liners for tunnels, shafts, mine plugs, etc. Contact grouting ...

    By Ground Engineering Contractors Drilling & Grouting, Inc. based in Knoxville, TENNESSEE (USA).

  • Material Testing Services

    CCI Group (CCIG) provides an extensive array of quality control testing for construction projects. Our team of qualified engineers and technicians have the experience and expertise to material test almost any material related to the construction of a new building or the restoration of an existing structure.

    By Construction Control Inc. based in Concord, ONTARIO (CANADA). from Science Services Service line

  • Grout Sample Testing Services

    Grout thermal conductivity is a critical design parameter in ground heat exchanger design. It has a significant impact on not only the length/depth of the bore but also in the subsequent system’s performance. Most geothermal heating/cooling projects are designed using a specific grout thermal conductivity value. It is then the ...

    By GeoPro, Inc. based in Elkton, SOUTH DAKOTA (USA).

  • Civils & Construction Services

    A full range of services to provide underwater support for marine projects - welding , burning, shuttering & concreting, pile and fender removal / replacement, seabed surveys, inspections, concrete repairs.Shearwater have been carrying out this type of work since 1991 for various Local Councils, Engineering firms and Civils Contractors such as ...

    By Shearwater Marine Services Ltd based in Argyll, UNITED KINGDOM.

  • Dam Grouting Services

    Grouting is a proven methodology for installing upgradient and downgradient barriers (grout curtains) in dam foundations and is employed where the rock formations in the dam foundation is pervious, such that the permeability of the rock formation would lead to later seepage problems. A grout curtain is used primarily as a means of limiting water ...

    By Geo-Con, Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Concrete Crack Injection Services

    Multiurethanes provides technical and engineering services for complex concrete crack injection applications, including training, troubleshooting, equipment and products.

    By Multiurethanes Ltd. based in Mississauga, ONTARIO (CANADA).

  • Construction and Renovation of Wastewater Installations

    Many of the wastewater installations constructed since the end of the 19th century in Europe need renovation after some 50 to 100 years of use. Some of these waste systems or parts of systems - pipes, manholes, water purification plants, catchment basins, oil and fat separators, digestion tanks, sludge settlement tanks and aeration tanks - can ...

    By ERGELIT TROCKENMĂ–RTEL UND FEUERFEST GmbH based in Alsfeld, GERMANY.

  • Jet Grouting Services

    As a leader in the use of grouting techniques and technology pioneer, Nicholson Construction Company has gained a wealth of experience in a range of jet grouting projects employing different systems in a variety of soils throughout the country. This experience has allowed us to provide robust optimized design solutions using this technique. 

    By Nicholson Construction Company based in Cuddy, PENNSYLVANIA (USA). from Ground Treatment Service line

  • Special Geotechnical Services

    Despite being experts, we remain grounded about our ability to provide special geotechnical services. Our extensive experience means we are able to tackle assignments large and small in quarrying, civil engineering, building and marine works.

    By Murphy Group based in London, UNITED KINGDOM.

  • Mine-workings & Ground Stabilisation Services

    Sirius delivers its stabilisation services across the UK and Mainland Europe, primarily as a design and build, Drilling and Grouting contractor but also providing, Slope Stabilisation, Soil Nailing and Ground Anchor solutions. Mineral extraction in the UK dates back to Roman times and can result in a legacy of abandoned shallow mine ...

    By The Sirius Group. based in Leeds, UNITED KINGDOM. from Contracting Service line

  • Dewatering Wells Services

    Nor-Cal has a team of dewatering specialists with experience in providing groundwater control. Our experience allows us to provide the most cost effective solution to whatever groundwater challenges you may face.

    By Nor-Cal Pump and Well Drilling, Inc. based in Yuba City, CALIFORNIA (USA).

  • Grouting Mortars

    ERGELIT dry mortars are ready-to-use high quality speciality mortars with synthetic additives, produced under a system of continuous quality control. They are made from environmentally friendly, frost resistant ingredients. ERGELIT grouting mortars are shrink-free and self-levelling, with excellent compression strength, adhesive strength and ...

    By ERGELIT TROCKENMĂ–RTEL UND FEUERFEST GmbH based in Alsfeld, GERMANY.

  • Well Abandonment Services

    Our well abandonment services includes, grouting wells in place, over-drilling and grouting, and in-situ grouting.Wellhead and pad removal, and reclaimation of the surface to its original condition.We maintain large and small volume grout plants to meet the needs of our customers.Our crews prepare the grouting and well abandonment equipment for ...

    By M & W Drilling, LLC based in Knoxville, TENNESSEE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you