Grouting Software For Soil And Groundwater Available In Iowa
-
based in ROMANIA
Pile and micropile software is intended for calculation of the bearing capacity of the foundation terrain of a pile or micropile (Screw-piles) bearing loads in whatever distribution (moment, normal force, shear). Structural calculation yielding dimensions of longitudinal steel struts, interval and size of rings is also ...
-
based in USA
Software for pile analysis for vertical, lateral, group, settlement, and negative friction. AllPile is a Windows-based analysis program that handles virtually all types of piles, including steel pipes, H-piles, pre-cast concrete piles, auger-cast piles, drilled shafts, timber piles, jetted piles, tapered piles, piers with bell, micropiles (minipiles), screw/helical piles, uplift anchors, uplift ...
-
based in USA
The GEOSYSTEM Quality Control - Concrete (QC-Concrete version 2) program maintains strength and property testing data on cement products, including concrete cylinders and beams, and mortar and grout cubes. It delivers client submittal and in-house tracking reports and lets you print lists of all specimens to be broken on a given day. Reports comply with all applicable ASTM and AASHTO reporting ...
-
by Rocsciencebased in CANADA
UnWedge is a 3D stability analysis and visualization program for underground excavations in rock containing intersecting structural discontinuities. Safety factors are calculated for potentially unstable wedges and support requirements can be modeled using various types of pattern and spot bolting and shotcrete. Use UnWedge to quickly create a model, perform a safety factor analysis, place ...
-
based in CZECH REPUBLIC
This program is used for the design of spread footings (spread or strip footing) subject to general load. It computes vertical and horizontal bearing capacity, settlement and rotation of a footing, and determines required longitudinal and shear reinforcement ...
-
Manufactured by Dakota Technologies, Inc.based in USA
Dakota has developed the Tar-specific Green Optical Screening Tool or TarGOST®. TarGOST was developed exclusively for detection of coal tars, creosotes, heavy crudes, and tank bottoms. Following a comprehensive spectroscopic study of coal tar behavior, Dakota created this method which results in a monotonic response for coal tars on a variety of soils. Lab tests of TarGOST indicate the system ...
-
by Rocsciencebased in CANADA
RS2 (Phase2 9.0) is a powerful 2D finite element program for soil and rock applications (RS2 = Rock and Soil 2-dimensional analysis program). RS2 can be used for a wide range of engineering projects and includes excavation design, slope stability, groundwater seepage, probabilistic analysis, consolidation, and dynamic analysis ...
-
based in USA
Helical pile analysis software HelixPile 2021: The best helical pile software available. 2021 Version with Helical Pile Groups and Pile Rafts. HelixPile 2021 is a user friendly, modern and powerful software program for the design of helical piles. HelixPile allows the user to include an unlimited number of stage conditions and soil profiles. HelixPile incorporates the latest recommendations and ...
-
based in USA
The GoldSim Contaminant Transport Module is an add-on extension to the GoldSim simulation software framework that allows you to dynamically model mass transport processes within complex engineered and/or natural environmental ...
-
based in ROMANIA
Software used for Dynamic Penetration Tests, that is the reading, recording, interpretation, storage and the management of any type of penetrometer including new or custom equipment and of in borehole SPT readings. Dynamic Probing provides functions for the archiving of readings by site and for automatic calculation of the real energy transmitted, including correction for warp and the correlation ...
-
based in USA
Deep foundation design can be more complex and challenging than it appears in simple text books. Determining the geotechnical pile capacity is an art with many different methods that are available. Beyond estimating the skin friction and end bearing very often we also need to determine the lateral pile capacity. Add to this structural capacity calculations, settlement performance, pile groups, ...
-
based in CZECH REPUBLIC
This program is used to make advanced design of embedded retaining walls using the method of elasto-plastic non-linear analysis. It allows the user to model the real structure behavior using stages of construction, to calculate the deformation and pressures acting upon the structure, to verify the internal anchor stability or to verify cross-sections (steel, RC, timber) and the bearing capacity ...
-
by Rocsciencebased in CANADA
Slide2 is a powerful, user-friendly, 2D limit equilibrium slope stability analysis program for all types of soil and rock slopes, embankments, earth dams, and retaining walls. Slide2 includes built-in finite element groundwater seepage analysis, probabilistic analysis, multi-scenario modeling, and support design. ...
-
by Rocsciencebased in CANADA
Created in 2017, Slide3 is a tool that allows geotechnical engineers to calculate the factor of safety of complex 3D slope stability geometries that 2D models cannot fully simulate. Model advanced geometries like landslides, MSE walls, slopes supported by soil nails, and more. With Slide3, users can calculate failures in any direction without the need for defining the direction in advance, ...
-
based in CZECH REPUBLIC
The FEM - Tunnel is used to design and analyze tunnels. It include a specialized tools for the definition of tunnel lining, system of anchors and rock bolts and grouting-strengthen regions. The relaxation factor assigned to each construction stage takes the 3D effect of the excavation into account. Tunnel is an extension module of the FEM program for the analysis of general geotechnical ...
-
based in CZECH REPUBLIC
This program is used to analyze a pile group (pile raft foundation with a rigid pile cap) using both spring method (FEM), or analytical solutions. Both floating piles and piles fixed into subsoil can be ...
-
based in USA
SVSLOPE represents the new standard in 2D/3D slope stability analysis. Users can perform classic limit equilibrium slope analysis of soil or rock slopes by the method of slices or newer stress-based methods. Comprehensive 2D slip surface searching and pore-water pressure conditions and innovative 3D spatial analysis allow modeling at new ...
-
based in CANADA
The integration of various multiphysics solvers and advanced features into a single software package enables Irazu to be used for a wide range of engineering applications, including but not limited to excavations, slope stability, tunnelling, dynamic analysis, mining, and reservoir geomechanics. Irazu comes with extensive tutorial, theory, and verification manuals. ...
-
based in ROMANIA
Loadcap is a software for the bearing capacity and settlements computation on rocks and loose soils, according to the methods of: Terzaghi (1955), Meyerhof (1963), Hansen (1970), Vesic (1975), Brinch-Hansen (1970), Richards et al. (1993), Meyerhof and Hanna (1978). The user can chooce several types of settlements such as: Elastic (Timoshenko and Goodier, 1951), Oedometric, Schmertmann ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you