oil contamination solution Articles

  • CH#952 - Oil Contaminated Soil

    SITE OWNER: A National Overnight Express Package Company SITE SURVEY: Site and geological surveys revealed a contaminated area north of the facility and west of a diesel tank pit. The cause of the contamination was the result of two (2) underground storage tanks (UST™). One tank contained waste oil while the other contained new oil. Both tanks had ...


    By Bio-Systems International

  • Characterization and treatability of a contaminated soil from an oil exploration zone

    Abstract: A crude contaminated soil, arising from an oil production zone in Tabasco, Mexico was studied. A sample of about 40 kg was dried and screened through meshes 10-100. Total petroleum hydrocarbons and 6 metals (Cd, Cu, Cr, Ni, V and Zn) were determined to the different portions. For soil which passed mesh 10, six non-ionic, three anionic and one zwitterionic surfactant solutions ...

  • Power plants use oil skimmers to prevent contamination from spills

    Most hydroelectric plants designed in the 1960s were built with a station drainage sump that collects all drainage from the plant. As designed, float switches activate sump pumps that discharge liquids directly into the tailrace. The system cannot distinguish between types of liquids, so in the event of an oil leak, oil in the sump could be released into the tailrace. Modern ...


    By Oil Skimmers, Inc.

  • Oil Spill Eater, Solution Oil Spillage in Niger Delta

    Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment.  In comparison, current response methods employed by three major oil companies - BP, Exxon and Shell - are ...

  • Innovative Project for Hydrocarbons Contamination

    Baioni Crushing Plants, leader in the aggregate crushing sector has been operating for 40 years, have recently developed equipment and methods for environmental control. Several plants have already been supplied to third parties, now Baioni have full know-how of the technology and can ensure correct conception of the line based on the specifications of the soil to reclaim and can provide ...


    By Baioni Crushing Plants Spa

  • Liberating contaminants for easy recovery

    The number one challenge associated with most site remediation designs and methodologies is that 90-95 per cent of all environmental contaminants are present in an adsorbed phase onto soil and bedrock surfaces within both saturated and unsaturated zones. Contaminants, including hydrocarbons (LNAPL), chlorinates (DNAPL) and heavy metals, are sorbed onto the substrates and so have reduced mobility ...


    By Ivey International Inc.

  • Oil refinery reduces energy consumption with a Culligan Solution

    Challenge A major petroleum refinery was looking to replace a hot lime softener. Naturally occurring minerals such as Calcium, Magnesium and Silica can cause scale in steam boilers and other types of equipment used in refinery operations. Scale deposits in steam boilers con reduce equipment efficiency and increase energy, chemical, disposal and maintenance costs. Hot lime softening is a ...


    By Culligan Matrix Solutions

  • Oil spillage

    An area of specialisation is the supply of pumping solutions based around their standard product range, but with a complete system designed to suit the end user’s specifi c requirement. Autoclude were approached by an environmentalengineering company who had to recover diesel fuel which had leaked from storage tanks and spread over a wide area. To limit the environmental damage and recover the ...

  • Faroe Maritime Technic provide total solution for treating Oily Sludge and contaminated Oily Water

    We at Faroe Maritime Technic provide total solution for treating Oily Sludge and contaminated Oily Water. Firstly our products - The Sludge Dewatering Separator and The Oil Conveyor are developed for the marine industry, but the same need is also on Power plants on shore. All Oily driven Power plants have these same need for treating Oily Sludge. A brief introduction of our products. ...

  • Cement industries solution to Waste Management - Remediation of oil refinery sludge basin

    Abstract Work was completed in early 1992 to clean up a 5.5 acre (2.2 ha) stormwater sludge basin for an oil refinery company. The basin, which had served as a stormwater collection and settling pond for over 40 years, contained oily sludges with high concentrations of certain metals and volatile organic compounds. The closure plan included a combination cement-bentonite slurry wall and jet ...


    By Geo-Con, Inc.

  • Density Dependent Water Flow and Contaminant Transport

    SoilVision Systems Ltd. would like to announce the release of the addition of fully coupled density-dependent water flow and contaminant transport in ChemFlux™ and SVFlux™. Using the new density-dependent flow capability can improve the accuracy of the simulation of heavy salt water. This new feature has been implemented in 1D, 2D, and 3D models and is enabled to ...


    By SoilVision Systems Ltd.

  • Kerosene contaminated soil removal - Argyll & Bute

    Remove hydrocarbon impacted material from the garden of a residential property, Glendaruel, Argyll & Bute The Client: Loss Adjuster The Challenge: Following the identification of a leak from a heating oil storage tank at the rear of residential property Soilutions assessed the spill impact. Approximately 200-300 litres of kerosene had ...


    By Soilutions Ltd

  • Density dependant water flow and contaminant transport

    SoilVision Systems Ltd. would like to announce the release of the addition of fully coupled density-dependent water flow and contaminant transport in ChemFlux and SVFlux. Using the new density-dependent flow capability can improve the accuracy of the simulation of heavy salt water. This new feature has been implemented in 1D, 2D, and 3D models and is enabled to work with the Professional version ...


    By SoilVision Systems Ltd.

  • Nanobite bioremediates a Contaminated harbour - Case study

    When a hydrocarbon is spilled on water, it is very visible – floating on the surface, a blue green sheen clearly visible. When applied to an oil spill on water, Nanobite Liquid will not mix with the water and become diluted. Within a minute it attaches to the hydrocarbon, bonding with it and creating a matrix – an agglomerated gel- that remains on the surface and cannot sink, no ...


    By Slick Solutions

  • 99% of Interceptor contamination remediated - Case study

    What is an Interceptor Tank? An interceptor tank is a trap used to filter out hydrocarbon pollutants from rainwater runoff. It is typically used in road construction and on petrol station forecourts to prevent fuel contamination of the water table via runoff. Petrol interceptors work on the premise that some hydrocarbons such as petrol and diesel float on the ...


    By Slick Solutions

  • Extending the life of wash solutions

    Simple things we learn early in life might well apply to a basic need of the parts washing market: To look good - wash well before you "dress." Washing metal parts is a necessity prior to painting or plating: If the wash is not properly prepared and foreign substances are not removed from the metal in the wash phase, the finish - the "dress" - may not hold properly, and it may not wear well. ...


    By Oil Skimmers, Inc.

  • Regeneration of used oil

    Used oil regeneration technologies Over time, oil accumulates oxidation products, contaminants and impurities which drastically reduce its quality. Contaminated oil can no longer meet quality requirements and must be changed. Waste oil is collected and regenerated to retain valuable basic materials. Oil cannot be recycled at petroleum processing plants with ...


    By GlobeCore GmbH

  • Oil Skimming...no longer a luxury

    Tramp oils – hydraulic oil, lubricating oil and greases, and protective metal coatings, in coolant create expensive and frustrating problems. Tramp oils in coolant provide a breeding ground for bacteria and can cause problems ranging from unpleasant odor to employee skin rashes. When tramp oils combine with other contaminants in coolant they can form a sticky substance that clogs lines and ...


    By Oil Skimmers, Inc.

  • Oil Skimmer technology offers pollution solution that saves money instead of raising operating costs

    Oil skimming is a simple, dependable and effective means of removing oil from water. And unlike some other processes, it offers users the potential for major cost savings. At Schenectady Chemicals Canada, Ltd., plant manager Fred Soukereff estimates that his company has saved $ 5,000 annually by using the skimmer instead of former methods of waste removal. "The real saving, however, is in ...


    By Abanaki Corporation

  • What do oil sands and shale gas have in common? Acute need for sustainable water management solutions

    The world’s appetite for fossil fuels is not abating anytime soon, and the alternatives fall short. Nuclear energy makes people uneasy, coal is perceived as not being that clean, hydroelectric requires massive capital outlays, solar is still improving and the wind just doesn’t always blow. For the foreseeable future, North Americans have embraced the idea that expanded production of ...


    By Biolargo, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you