oil remediation filter Articles

  • Groundwater Remediation Case Study

    Wastewater Treatment Success Stories Groundwater Remediation This sample is representative of the ground water that contains diesel fuel from years past. The facility currently uses traditional ...


    By Integrated Engineers Inc.

  • Fuel oil removal

    Project Profile:Aquifer Solutions Groundwater Remediation DATA: End User: Aquifer Solutions, for Republic Paper Location: Board Commissioned: Commerce City, CO, Fall, 2003 Units: (1) FDB-19P Complete with dedicated Flow Rate: backwash ...


    By Filtra Systems

  • Land remediation & sludge processing case study

    In late 2009 the company was approached by a London based consultancy on behalf of their clients with oil and gas interests in an Eastern European country. The brief was to supply a technology that could assist in the clean-up of historical oil spills around redundant oil wells in a working oilfield. Our initial meeting led us to believe that this was a viable contract and following several ...

  • 99% of Interceptor contamination remediated - Case study

    What is an Interceptor Tank? An interceptor tank is a trap used to filter out hydrocarbon pollutants from rainwater runoff. It is typically used in road construction and on petrol station forecourts to prevent fuel contamination of the water table via runoff. Petrol interceptors work on the premise that some hydrocarbons such as petrol and diesel float on the ...


    By Slick Solutions

  • Efficient pit remediation - CETCO Oilfield Services Process for Treating Pit Water

    A consulting firm was involved in remediating a large earthen pit, which previously contained oil and produced waters near Venice, Louisiana. The site contained approximately 17,000 barrels of produced water and accumulated rainwater. While the entire project involved many aspects, excavating the contaminated soil could not commence until the 17,000 barrels of oily surface water was removed. ...


    By CETCO Energy Services

  • HS-200 Lowering company costs and liability

    A major printing company was experiencing difficulties with managing their wastewater treatment system due to a higly concentrated oily water influent. The grab samples performed by the local sanitary district exhibited high levels of BOD, COD and oil and grease levels in the discharge water. The problem was traced back to their compressor condensate discharge. The company has ...


    By Hydrosil International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you